Tender For special Repair To Wall Panelling, False Ceiling, Floor Tilling, Bathroom Repair And Electric Works At Bldg No P-609 At Birpur Cantt And special Repair To Roof Sheet In Bldg No P-89 At Rimc, Dehradun And special Repair To 10 Nos Male & Fema
Tender Value
47.81 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
15 days left
EMD
95620
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Wall Panelling, False Ceiling, Floor Tilling, Bathroom Repair And Electric Works At Bldg No P-609 At Birpur Cantt And special Repair To Roof Sheet In Bldg No P-89 At Rimc, Dehradun And special Repair To 10 Nos Male & Female Washrooms At Kv Birpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting , any gauge , thickness,including Nainital or similar pattern as in roof coverings complete al as specified and directed. |
| 2 | Dismantling of timber scantling 40 sqcm & over in section uframed in any position complete all as specified and directed. |
| 3 | Demolotion of cement concrete (un reinforced) in groundfloor and paving n.exc 15 cm thickness (below or above ground level) complete all as specifed and directed. |
| 4 | Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 5 | Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 6 | Material and labour for brickwork (except bricks) with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and directed. |
| 7 | Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as specified and directed. |
| 8 | Supply and fixing of mild steel joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section, MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc conforming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed. |
| 9 | Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 10 | Supply and fixing of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 11 | Material and labour for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | Material and labour for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and smooth complete all as specified and directed. |
| 13 | Material and labour for 595 mm X 595mm false ceiling system, using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete including taking down existing false ceiling of any description complete all as specified and directed. |
| 14 | Material and labour for complete removal of existing treatment from wall upto plaster surface by washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed. Note: Work shall be carried out upto 3 storey. Rates of necessary scaffolding deemed to be include in this item |
| 15 | Material and labour for applying two coats of acrylic distemper over a coat of primer, white or tinted over not less than 1 mm thick wall care putty in two coats complete all as specified and directed. |
| 16 | Material and labour for preparation of newly plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing complete all as specified and directed. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac Perma No Damp + or equivalent. |
| 17 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement including demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as specified and directed. |
| 19 | Material and labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified and directed. |
| 20 | Supply and fixing of 4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed. |
| 21 | Material and labour for vitrified ceramic tiles light coloured (square/rectangular) thickness 10 mm thick, exceedign 0.36 Square metre but not exceeding 0.42 Square metre in floors etc set & jointed in neat cement slurry @ 3.0 Kg/Sqm & pointed in coloured cement to match the shade of tiles including and over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 22 | Material and labour for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 23 | Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of OBD over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. |
| 24 | Material and labour for complete removal of existing treatment and applying two coats of SmartCare Damp Proof advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing including preparation of surfaces to receive the coats as per manufacturer directions all as specified and directed. Make:- Asian Paints Product Cose 5457 or Berger Home shield dampstopp Elasto or Nerolac Perma No Damp + or equivalent. |
| 25 | Material and labour for non skid/mat finish ceramic coloured tiles of size 400 mm x 400 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 26 | Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 27 | Material and labour for coloured pre-polished rubber moulded chequred cement concrete coloured (red/yellow) tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry @ 3.0 Kg/Sqm as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 28 | Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. |
| 29 | Supply and fixing of mild steel framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 30 | Material and labour glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 31 | Supply and fixing in repair of vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, connecting to stack pipe and to flushing pipe and complete including making good to floor, complete all as specified and directed. |
| 32 | Supply and fixing in repair of 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed. |
| 33 | Supply and fixing in repair of vitreous china wash hand basin including brackets, white size 550 x 400 mm including cutting for and pinning in ends of brackets, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe, pillar tap including fixing of tap, and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 34 | Supply and fix in repair pillar taps, swan neck type, 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure screwed fixed complete all as specified and directed.. |
| 35 | Supply and fixing in repair of 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 36 | Supply and fixing in repair of 15 mm bib tap CP, cast copper alloy with capstan head screwed down screwed for iron pipe or for brass ferrule fancy type, complete all as specified and directed. |
| 37 | Supply and fixing in repair of 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 38 | Supply and fixing in repair of PVC connection 15mm size with PTMT nuts, of 450 mm long complete all as specified and directed. |
| 39 | Supply and fixing in repair of 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 40 | Supply and fixing in repair of sink/waste coupling 32mm dia PTMT half or full threaded complete all as specified and directed. |
| 41 | Supply and fixing in repair of chromium plated steel grating round with steel frame with hinge 100mm dia all complete all as specified and directed. |
| 42 | Supply and fixing in repair of PVC floor trap of 75mm bore, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4)complete all as specified and directed. |
| 43 | Supply and fixing in repair of PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall / laid in trenches or in floors complete all as specified and directed. |
| 44 | Supply and fixing in repair of PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall / laid in trenches complete all as specified and directed. |
| 45 | Supply and fixing in repair of PVC (SWR) bend 110 mm dia, any radius with oval access door complete all as specified and directed. |
| 46 | Supply and fixing in repair of PVC (SWR) bend 75 mm dia, any radius with oval access door complete all as specified and directed. |
| 47 | Supply and fixing in repair of 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 48 | Supply and fixing in repair of 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 49 | Supply and fixing in repair of 32mm bore heavy duty waste pipe not less than 60cm long with PVC coupler for kitchen sink, WHB, urinal, etc complete all as specified and directed. |
| 50 | Supply and fixing of rotational moulded polyethylene water storage tanks of capacity 500 litres tripple layer, not less than 18 Killogram (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 51 | Supply and fixing in repair of gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed. |
| 52 | Supply and fixing in repair of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long , complete all as specified and directed.. |
| 53 | Supply and fixing in repair of health faucet suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position ,complete all as specified and directed. |
| 54 | Taking down chowkats or frames with shutter not exc. 1.5 Sq mtr each with shutters (without taking off shutters) from the frames, complete all as specified and as directed. |
| 55 | Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Killogram/Cubic meter from ISO certified company door should be water proof, teRunning meterite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. |
| 56 | Supply and fixing 30 mm thick WPC factory made 100% solid designer flush door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kilogram/Cubic metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. |
| 57 | Supply and fixing of for powder coated aluminium partition (fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed. Note: Iron grill with frame to be fixed with window (measured and paid separately) |
| 58 | Supply and fixing for solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing including dismantling of old boarding complete all as specified and directed. |
| 59 | Material and labour for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width including dismantling of old boarding complete all as specified and directed. |
| 60 | Material and labour for preparation of new surfaces of walls and applying two coats of cement base paint over applying of 1-1.5 mm thick wall care putty complete all as specified and as directed. |
| 61 | Material and labour for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed. |
| 62 | Material and labour for complete removal of existing treatment of walls and applying two coats of cement base paint over applying of 1-1.5 mm thick wall care putty complete all as specified and directed. |
| 63 | Material and labour for complete removal of existing treatment of walls and applying three coats of white wash on walls complete all as specified and as directed. |
| 64 | Supply and fixing in repair of vitreous china half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 65 | Supply and fixing in repair of urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)complete all as specified and as directed. |
| 66 | Dismantling water tanks 500 to nexc 1000 ltrs and removing to store complete all as specified and as directed. |
| 67 | Supply and fixing of rotational moulded polyethylene1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and ditected. |
| 68 | Material and labour for glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or colour cement to match thick over and including 10 mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match complete all as specified and directed. |
| 69 | Material and labour for non skid ceramic tiles 7-8 mm thick(Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match of coloured tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 70 | Taking down chowkhats or frames nexc. 1.5 Sqm with shutters each complete all as specified and directed. |
| 71 | Taking down chowkhats or frames but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 72 | Supply and fixing of flush shutters moulded 30 mm thick frame to match , solid core construction, with block board core and plywood face panels, complete all as specified and directed. |
| 73 | Supply and fixing of PVC solid factory made door frame (chowkhat) of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed. |
| 74 | Supply and fixing of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gab insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as shown in SSR Part-II and as directed. |
| 75 | Supply and fixing of 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 76 | Supply and fixing of 150 mm long aluminium anodised handles of fabricated type complete all as specified and as directed. |
| 77 | Supply and fixing of butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 78 | Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth & complete all as specified and directed. |
| 79 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed. |
| 80 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.. |
| 81 | Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 82 | Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 83 | Material and labour cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed. |
| 84 | Supply and fixing in repair of vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, including connection to trap and to flushing pipe, anti syphonage pipe etc, and making good to floor complete all as specified and as directed. |
| 85 | Supply and fixing in repair of chromium plated steel grating of maximum dia 150mm complete all as specified and directed |
| 86 | Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads complete all as specified and directed |
| 87 | Material and labour sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed. |
| 88 | Material and labour for two coat of synthetic enamel paint of any description, over a coat of pink primer, including preparation of new wooden surfaces of any description , over 10 cm width/girth complete all as specified and directed. |
| 89 | Material and labour for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over one coat of primer wall surface even & smooth by roller complete all as specified and directed. |
| 90 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed. |
| 91 | Returning, filling in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft/loose soil after cables/pipes etc are laid and tested complete all as specified and directed. |
| 92 | Removal of surplus soil to a distance not exceeding 50 mtrs & depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed. |
| 93 | Material and labour for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 94 | Supplying, laying, jointing and testing salt glazed stone ware drain pipe 200 mm Internal dia, grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 including dismantling of old pipe 200mm bore set in cement mortar complete all as specified and directed. |
| 95 | Material and labour for PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed. |
| 96 | Material and labour for cutting into existing manholes for connecting new drains of 200 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed. |
| 97 | Taking down carefully copper/aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 98 | Taking down carefully copper/aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender