Tender For Provn Of One Toilet Block With Allied Services At Mt Sec, Hq Cif (R) Under Age (I) Cif (R )
Tender Value
9.69 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
11 days left
EMD
19380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of One Toilet Block With Allied Services At Mt Sec, Hq Cif (R) Under Age (I) Cif (R )
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified. |
| 2 | Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation and getting out in any type of soil complete, as directed & specified |
| 3 | Providing cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate as in foundation, filling and mass concrete. |
| 4 | Brick work with Sub Class ‘B’ burnt bricks (Old size bricks) straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6. completed, as directed & specified. |
| 5 | M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed. |
| 6 | Returning, filling in any type of soil, including spreading, leveling , watering and well ramming in layers not exceeding 25 cm. |
| 7 | Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point completed as directed & specified. |
| 8 | Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 9 | Reinforce cement concrete M-25 (20mm graded aggregates) design mix columns, pillars, piers,posts and struts complete all as specified and directed. |
| 10 | Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span all as specified and directed. |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough flat finished surfaces of concrete,complete all as specified and directed. |
| 12 | Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough flat finished surface of concrete, complete all as specified. |
| 13 | Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete as per specified & directed. |
| 14 | M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 15 | All as per srl item No. 18 above but 6 mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified. |
| 16 | M&L for 10 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified. |
| 17 | M&L for 15 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound all as specified (WPC shall be measured separtely). |
| 18 | Supply only integral water proofing compound all as specified |
| 19 | M&L for preparation of new plastered surfaces on walls and applying three coats of white wash.complete all as specified and directed. |
| 20 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge. |
| 21 | M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified. |
| 22 | M&L 75 mm thick cement concrete (1:4:8) type D2 as sub base to floor as specified. |
| 23 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified. |
| 24 | M&L for 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified. |
| 25 | M&L for Non-skid coloured ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface,complete all as specified and directed. |
| 26 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified. |
| 27 | M&L for Glazed ceramic tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed. |
| 28 | M&L for 50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specified. |
| 29 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 30 | S & F plain galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick in ridges, hips, valley gutters at the external end slope of any colour having tansile strength 550 Mpa as in roof(ridges) covering fixed with self tapping screws and caps etc. |
| 31 | M&L for roof trusses (framed), trussed,ladder, water tanks, purlins,crane gantries, rails and fastening and heavy bracket framing (beam, tee,angle,channel or flat section) including distance pieces. |
| 32 | M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping/benching complete all as specified and directed. |
| 33 | Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 34 | S&F for mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately. |
| 35 | Mild steel framed work such as grills, gratings,etc, with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bar ; barred iron doors, ladder ; framed balusters ; railing ; frame work for water tanks and similar work conforming to Fe-410,Gde-E-310, complete all as specified. |
| 36 | Supply and fix 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm |
| 37 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified. |
| 38 | 30 mm thick, factory made solid panel PVC moulded door shutter (style) consisting of frame made out of M.S tube for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails and bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site as per specification and drawing complete all as specified and directed. |
| 39 | S&F aluminum handles cast type, anodised, 150 mm size complete all as specified . |
| 40 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified . |
| 41 | S&F stainless steel cold rolled butt hinges medium weight 100 mm long complete all as specified. |
| 42 | S&F for steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified. |
| 43 | S&F for steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified. |
| 44 | S&F for 20mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified . |
| 45 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified . |
| 46 | S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified . |
| 47 | S&F for 1000 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top and triple layer with white colour) hoisted and fixed in position all as specified in SSR Part I. |
| 48 | S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing sprindle jet, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) complete all as specified. |
| 49 | Supply and fix in vitreous china wash hand basin white table top size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge. |
| 50 | S&F water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified. |
| 51 | M/L for PCC 1:5:10 TY E-2 as in Sunken floor /foundation filling and mass concrete |
| 52 | S&F in Vitreous China wash down water closet pan “Pedestal pattern” size 580x440mm white (excluding flushing cistern and flush pipe) with PVC ‘P ’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete all as specified and directed. |
| 53 | S & F plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed |
| 54 | S/F of hand health faucet complete all as specified and as directed. |
| 55 | S&F SS tubular towel rail, 20mm dia, D type, 60cm long between flanges , fixed with rawl plugs. complete all as specified in repairs. (ISI Mark) |
| 56 | S&F for 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified. Make : CERA or equivalent |
| 57 | Supply Only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified. |
| 58 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 59 | S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) |
| 60 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 61 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 62 | S&F for PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified. |
| 63 | S&F for Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified. |
| 64 | S&F, 15 mm dia bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified. |
| 65 | S&F 15mm bore pillar tap cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe.(Make Johnson /Cera or equivalent ) |
| 66 | Brass CP shower rose 125 mm size in repair complete all as specified and directed. |
| 67 | S&F 32mm dia waste coupling of PTMT(half or full threaded) (Minimum weight 32mm ,45gms), completed all as specified. |
| 68 | Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified. |
| 69 | S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed |
| 70 | S&F for PVC (SWR) floor trap with dia of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified. |
| 71 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 72 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 73 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls |
| 74 | S&F 75 mm PVC (SWR) bends any radius |
| 75 | S& F 110 mm bore PVC SWR bends and fixed with joint sealent etc complete all specified and as directed |
| 76 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal |
| 77 | S&F 75 mm PVC (SWR) junction double, (double T), equal or unequal |
| 78 | S&F for PVC (SWR) reducers |
| 79 | S&F for 75 mm PVC (SWR) vent cowl |
| 80 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified. |
| 81 | M & L for PCC type C 2 1:3:6 (20mm graded stone aggregate) as in surface channels and drains etc incl.necessary form works. |
| 82 | Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stop ends etc complete all as speicified and directed by Engr-in-Charge |
| 83 | M & L for Gravity Sewers of RCC NP3 150 mm dia pipes laid on 150 mm thick bed and 150 mm thick PCC Cradle of 1:4:8 with excavation in any type of soil, including manholes/drop manhole of standard size made of brick masonary/RCC/Precast RCC with SFRC ventilating cover and frame. Including all items and activities to execute and make sewer line functional for depth 0.70 m - 1.65 m complete all as specified and directed |
| 84 | M & L for Construction of Septic Tanks for for capacity of 5000 ltr conventional type LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. |
| 85 | M & L for Soakage wells of size 1.2m dia X 3.0 m effective depth in excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size |
| 86 | M&L for point wiring for one light/fan point controlled by one switch concealed type with PVC insulated unsheathed copper cable FRLSH 1.5 sqmm multi stranded two single copper conductor in and including suitable size PVC conduit pipe complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2 mm thick suitable for modular switch/socket of adequate size including iner and outer white cover plate of modular complete all as specified and directed for light/Fan/exhaust/call bell points. |
| 87 | All as per item No. 1 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm PVC insulated unsheathed continuous earth wire and connecting to common earth dolly. |
| 88 | Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed |
| 89 | Supply and fixing of modular switch single pole one way 16 Amps 1 module complete all as specified and directed |
| 90 | Supply and fixing of modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and directed. |
| 91 | Supply and fixing of ceiling rose 65X50 mm two to three terminals complete all as specified. |
| 92 | Supply and fixing MCB DB 8 way double door SPN, 240 Volts all as specified and directed. |
| 93 | Supply and fixing MCB SP 6 to 32 Amps 'B' curve, 240 Volts all as specified and directed. |
| 94 | Supply and fixing MCB SPN 6 to 32 Amps 'B' curve, 240 Volts all as specified and directed. |
| 95 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 2 core. All as per specified and directed. |
| 96 | Supply and fix Exhaust Fan, metal body complete with frame and louvers shutter, voltage 230V, 50 Hz, Copper winding of sweep 300 mm inluding making fixing arrangements including cutting of wall/surface for fixing of exhaust fan and making good the disturbed surface shall be part of job at no extra cost. |
| 97 | Supply and Fixing LED light fittings 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of size from ceiling rose complete. |
| 98 | Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 Volt, AC decorative type with driver holder and LED lampincluding connecting up with three core flexible copper conductor cable of suitable size complete |
| 99 | M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4.0 mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. All as specified and directed. |
| 100 | Excavation in trenches, in any type of soil not exc 1.5 mtr wide and not exc 1.5 m in depth for foundation, etc or not exceeding 10sqm on plan and not exceeding 1.5m in depth for pole, shafts, cesspits, manholes, pier holes, etc. and getting out of any type of soil for laying UG cables of various sizes complete all as specified and directed. |
| 101 | Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm in any type of soil. |
| 102 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 103 | S&F Double walled corrugated (DWC) HDPE pipe with outer wall for being corrugated impacts, excellent ring stiffness (compression strength ) and inner wall for smooth allowing easy insertion of Cable in orange colour with and External influence (IP-66/67) with governing Specification IS 16205:Part 24:2017 of size 40mm/32mm(outer dia/inner dia) FOR protection of Cable in ducts/walls/pole etc complete all as specified and directed by Engr-in-Charge. |
| 104 | Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1.0”) dia including all fitting and jointing with Inserting of cutting of suitable size from existing pipeline all as specified and directed. |
| 105 | Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm all as specifed and directed by Engr-in-Charge. |
| 106 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diencast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 107 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including fiixing arrangement all as directed by engr-in-charge. |
| 108 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Nil during AOCNote:- Tenderers shall not quote for this Schedule Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender