Tender For Comprehensive Maintenance / B& R Repair To Roof And Sunken In Jcos, Ors Married Accn For 23 Fad Area Under Age (I) Suranussi (Tender Id No. 2026_Mes_769079 _1)
Tender Value
44.99 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
16 days left
EMD
89980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance / B& R Repair To Roof And Sunken In Jcos, Ors Married Accn For 23 Fad Area Under Age (I) Suranussi (Tender Id No. 2026_Mes_769079 _1)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed |
| 2 | Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed |
| 3 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed |
| 4 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed |
| 5 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed |
| 6 | Taking down shutters of any description exceeding 1sqm each and not exceeding 2.00 sqm each complete all as specified and as directed |
| 7 | Taking down shutters of any description size exceeding 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed |
| 8 | M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified |
| 9 | Ditto all as per item No above but except brick work complete all as specified. |
| 10 | M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. |
| 11 | M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified. |
| 12 | M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed |
| 13 | Dismantling mild steel work of any description not otherwise provided for complete all as specified |
| 14 | S&F Framed work as in doors or gates of angle or grills/guard barsor any other section where required with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed by Engineer-in Charge. |
| 15 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 100 x 50 mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 16 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 125 x 65 mm Doubler rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 17 | Providing and fixing 30 mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER (more than two panel top,middle and bottom) consisting of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh/grill 5 to 6 mm thick for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 150mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings. |
| 18 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid CNC Design digital /Laminated/ decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 19 | S&F 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial face on both faces including both face is covered with decorative face veneer with 6mm thick lipping/frame to match complete all as specified and as directed |
| 20 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm but single side prelam PVC sheet & edges will be painted to match with prelam sheet and door with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 21 | S&F for Factory Made 28 to 30 mm thick Solid PVC Moulded Door (Solid core )Shutter,(stiles), with 2, 4, or 6 raised panel design with solid core of Particle board of 24 mm thick (12 mm x 2 Nimbers). The particle board shall be lipped with 25 mm thick baton of PVC sheet where hinges are to be fitted . On the other sides the lipping shall be of 15 mm thick PVC baton . 2mm thick Prelam Moulded PVC Sheet shall be stuck on the front face of Particle board door.Another 2mm thick plain colour PVC sheet shall be stuck on back face of particle board with thermosetting adhesive. 2mm thick PVC sheet shall be stuck with lipping using solvent cement .Complete as per direction of Engr-in-charge |
| 22 | M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed |
| 23 | S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge. |
| 24 | Hacking old broken glass of any size and desription from steel frame |
| 25 | S&F in repair 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in Charge. |
| 26 | Supply & Fixing for wire gauge shutter and skeleton shutter steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :-(i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window.(ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf.(iii) MS tower bolt 150 mm long-02 Nos each leaf.(iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf(v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf.(vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf.(vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame.(viii) Fabrication and fixingNote :(i) Two shutters ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Wire gauge and glass shall be measured and paid for separately under relevant item of schedule. |
| 27 | S&F 300mm size stainless steel (202/304 grade) sliding door bolt plate type stove enamelled not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified |
| 28 | S&F stainless steel barrel tower bolt 200mm size stove enamelled with bright bolt etc all as specified |
| 29 | S&F 150 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge. |
| 30 | S&F 200 mm size stainless steel (Grade 304) pressed handles, oval type and depth 50 mm , all as specified and directed by Engineer-in Charge |
| 31 | S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge. |
| 32 | S&F 300mm long mild steel ordinary rat rail rod pattern door spring including roller and roller plate complete all as specified and as directed by engineer-in-charge. |
| 33 | S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 34 | M & L 18/19 mm thick Prelaminated plywood/Engineered wood like BWP Plywood or HDHMR , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including external teak wood lipping ,6mm thick fixed with nails |
| 35 | S & F auto closing hinges 50 mm size of 0 crank OR 8 crank openable at 110 degree for kitchen cabinet shutters, of stainless steel grade SS-304, bright finish or electro galvanised complete as approved by GE. |
| 36 | S&F Continous (piano) hinges, stainless steel, bright finish or electrogalvanised, width of flap 40mm, complete all as specified and directed. |
| 37 | S&F stainless steel handles 125 mm size for kitchen cabinet shutters/ cupboard complete all as specified and directed. |
| 38 | S&F magnetic catcher of size 20mmx50mm suitable for kitchen cabinet shutters/ cupboard, complete all as specified and directed. |
| 39 | S & F Ball bearing runners 50 mm size Telescopic full extension load capacity 50 kgs, of stainless steel grade SS-304 complete as approved by GE. |
| 40 | M&L Hasp and staple safety type aluminum anodised 100 mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified |
| 41 | S&F in repair Vitreous china ware water closet \\"Orissa Pattern \\" of size 580mm X 440mm size with integral foot rest with 'P' or 'S' trap ,integral foot rest including water connection to trap and flushing pipe ,flushing cistern etc including lime concrete in lime mortar 1:3 using broken bricks 40mm graded coarse aggregate complete all as specified. |
| 42 | S&F in repairs vitreous china wash down water closet Padestal pattern( white ) includng plastic water closet seat white with jet .closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device P or S trap including plastic water closet seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified. |
| 43 | Supply and fixing plastic water closet seat cover white closed patern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices |
| 44 | S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge. |
| 45 | S& F in repair vitrious china wash hand basin flat back 550X400mm with full padestal incl fixing bracket, and waste pipe, etc all as specified and directed by engineer-in-charge. |
| 46 | S&F in repairs 600X450mm bevelled edge looking mirror of selected quality glass of 4mm thick etc mounted on AC board complete all as specified and directed by engineer-in-charge. |
| 47 | S&F in replacement 20 mm dia harrison rails stainless steel with decorative finish , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM) |
| 48 | M&L for PCC 1:5:10 type E2 using 40 mm graded bricks aggregate as in filling in sunken floor etc all as specified and directed |
| 49 | Given sunken floor shall be treated as per following instructions and directed by Engr in Charge :- |
| 50 | (A) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or miling to remove cement laitance, existing coatings and achieve a gripping profile that is clean dry and free from laitance and any other form of surfece contamination. The installation instructions n manufacturer's published literature should be strictly complied with, includingf but not limited to the following:- |
| 51 | (aa) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putty/Dr fixit 302 SBR latex/ Perma Latex SBR/ FOSROC Nitabond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, Wire brush, hair brush & vacuum pressure if required. |
| 52 | (bb) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO. |
| 53 | (cc) Whilist the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO of viscosity as per manufacturer's instructions. |
| 54 | (dd) Apply glass febric sheet of Sika Fab 1/FOSROC/ DR Fixit/ STP whilist the first coat is wet. |
| 55 | (ee) Once touch dry, apply second coat of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO of viscosity as per manufacturer's instructions on the entire area. |
| 56 | (ff) Second coat shall be applied 6-8 hours of application of previous coat and in the direction right angle to the previous coat. |
| 57 | (gg) The waterproofing coating should be taken to a height minimumn300 mm above the finished floor level on the vertical surface. |
| 58 | (hh) It is essential to cure Acrylic modified Cementitious coating immediately after application (minimum 6-8 hours drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. |
| 59 | A protection plaster 15mm thick in CM 1:3 admixed with appropriate Integral water proofing compound has to be applied on the walls. |
| 60 | Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika Plastocrete over the applied water proofing coating on horizontal surface. |
| 61 | (kk) All the corners and joints should be pretreated with an elastic waterproofing sealing tape withy a wooven bonding mesh on each surface ab=nd an elastic expansions zonbe in the centre. |
| 62 | (ll) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. |
| 63 | (mm) Waterproofing/Sunken floor treatment has to be carried out through applicators authorised by the respective manufacturers and approved by GE. |
| 64 | Supply and applying of crack bridging water proofing sealing tape, Sika deal F tape. |
| 65 | Dismantling brick tile or terracing tile single layer on roof complete all as specified and as directed by engineer-in-charge. |
| 66 | Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part there of) and washing the surface thoroughly to remove all mud complete all as specified. |
| 67 | M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate ) as in benching ,roof padding, roof kerbs or muds stops coping etc rounded or chamfered on edges complete all as specified and directed. (bldg ht may vary upto 10.00mtr). |
| 68 | M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately. |
| 69 | Supply only liquid water proofing compound conforming to IS-2645complete all as specified and as directed by engineer-in-charge. |
| 70 | Cleaning the surface and made free of dirt,foreign particle,laitance followed by grinding all protrusion to make surface modulated.there after inspection for cracks on the surface caused by thermal expiation contraction.cutting the grooves with suitable cutter machine in V groove filled with repair mortar/micro concrete general purpose grout as recommended proportionally as per recommendation of manufacturer.making of gollas as all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight complete all as specified and directed.NOTE :- Unit rate quoted shall also include for removal of existing PVC water storage tank,water pipe line ,gate valve carefully and refixing at the same or other position after completion of roof repair work |
| 71 | Providing and applying liquid Polyurea-PU based hybrid elastomeric water proofing membrane including fibre mesh between the PU coats at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats. The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two- three coats. The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application. Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system (Make - Asian Paints/Berger) Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm. |
| 72 | Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge. |
| 73 | Dismantling water tanks of any description exc 500 and n.exc 1000 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge. |
| 74 | S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed |
| 75 | S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed |
| 76 | Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 250 & n exc 500 Ltr and from mouths of circulating pipes, etc complete all as specified and directed by Engineer – in – Charge |
| 77 | Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 500 & n exc 1000 Ltr and from mouths of circulating pipes, etc complete all as specified and directed by Engineer – in – Charge |
| 78 | S&F in repairs HDPE PVC lid (cover) for 500 Ltrs to 1000 ltrs capacity PVC tank complete all as specified |
| 79 | Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge. |
| 80 | Ditto all as per item No 67 above but 20mm bore. |
| 81 | S&F 15 mm dia GI water tubing ,medium grade with all fittings complete to wall and ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making goods the same with cement concrete 1:2:4 including laid in floor etcetc complete all as specified and as directed by engineer-in-charge. |
| 82 | S&F 20 mm dia GI water tubing ,medium grade with all fittings complete to wall and ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making goods the same with cement concrete 1:2:4 including laid in floor etcetc complete all as specified and as directed by Engineer-in-charge. |
| 83 | M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 84 | S&F in repair brass chromium plated shower rose of 150 mm size (Square shape) and 450 mm long CP arm, with or without swivel joints including fixing to steel pipe or union all as specified and directed by Engineer - in - Charge. |
| 85 | S&F in repair PVC Connection 15mm size with PTMT nuts of length 450mm to 600 mm complete all as specified and as directed by engineer-in-charge. |
| 86 | S&F in repair stop valve (Concealed type ) ,15 mm cast copper alloy with long shank & CP cup with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed fancy type complete. |
| 87 | S&F in repair 15mm angular stop valves, fancy type chromium plated, with long shank and cup screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed . |
| 88 | S&F in repair 15 mm bore dia bib tap (long body) cast copper alloy with cp cup and crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge. |
| 89 | S&F in repair 20 mm size stop valves Stop valves, cast copper alloy, screwed down, high pressure, with cp cup and crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge. |
| 90 | Supply and fixing in replacement chromium plated grating 125mm dia circular fixing with cement mortar 1:3 on nahani trap/floor trap complete all as specified and directed. |
| 91 | S&F in repair Hot and cold basin mixer fancy type single or double legged cast copper alloy screwed down high pressure with cp cup and crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified. |
| 92 | S&F in repair Hot and cold wall mixer fancy type single or double legged cast copper alloy screwed down high pressure with cp cup and crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wall complete all as specified . |
| 93 | S & F in repair soap dish, vitreous China white, approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated brass screws |
| 94 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs. |
| 95 | S&F brass chromium plated towel ring fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed. |
| 96 | S&F in repair Brass chromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges complete |
| 97 | S&F 5 mm thick toughened Glass corner shelf including CP railing, radius 300mm complete all as specified and directed. |
| 98 | S&F 5 mm toughened Glass Straight shelf 600 x 125 mm including CP railing complete all as specified and directed. |
| 99 | S&F in repairs waste coupling of PTMT 32 mm dia half or full threaded for WHB all as specified and directed. |
| 100 | M&L preparing new surfaces of walls and applying two coats of oil bound distemper over a coat of 2 mm thick wall care putty to achieve smooth finish etc all as specified |
| 101 | M&L for complete removal of existing treatment of walls and preparing old decorated plastered or unplastered surface of walls and applying two coats of oil bound distemper over and including a coat of 2mm thick wall care putty to achieve smooth finish surface on wall complete all as specified. |
| 102 | M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of primer complete all as specified incl preparation of surfaces. |
| 103 | M&L for preparing newly plastered surface of wall /roof/Chajja projections incl facia cornices and applying two coats of weather proof exterior emulsion paint over a coat of primer as per design/pattern given by Engineer-in-Charge etc. complete all as specified and directed by Engineer-in-Charge Note :- Emulsion to be carried out through air less spray machine (Mechanical means) shade and coloured as approved by Engr-in charge Make : - Asian Paints |
| 104 | M&L for complete removal of existing treatment and preparation of old plastered or unplastered surface of wall /roof/Chajja projections incl facia cornices including brooming down or steel wire brushing scrapping down smoke roof,moulds moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of weather proof exterior emulsion paint over a coat of primer incl 2 mm thick wall care putty where required as per design/pattern given by Engineer-in-Charge etc. complete all as specified and directed by Engineer-in-Charge Note :- Emulsion paint to be carried out through air less spray machine (Mechanical means) shade and coloured as approved by Engr-in charge. Make : - Asian Paints |
| 105 | M&L preparing new plastered surfaces on ceiling and applying two coat of oil bound distemper over a coat of alkali primer etc all as specified |
| 106 | M&L for complete removal of existing treatment and preparation of old plastered or unplastered surface of wall surfaces on ceiling and applying one coats of oil bound distemper etc all as specified |
| 107 | M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces complete all as specified |
| 108 | M&L for one coats synthetic enamel paint on old treated wooden surface over 10 cm width or girth all as specified |
| 109 | M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer etc all as specified |
| 110 | M&L for preparation of old painted steel surfaces of any description over 10cms width or girth and applying one coat of syntehtic enamel paint on steel surfaces comple all as specified |
| 111 | M&L for 75 mm th cement concrete type C-2, 1:3:6 as in plinth protection with using 40mm graded stone aggregateincl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ration 1:2 by weight etc complete all as specified and as directed by engineer-in-charge. |
| 112 | M&L for 40 mm th PCC 1:2:4 type B1 (using 20mm graded aggregate) as in flooring incl finishing the surface even and smooth with using extra cement complete all as specified and as directed by engineer-in-charge |
| 113 | M & L for repairing of RCC projections ,chajjas,roofs,facia,etc.by necessary preparations i.e.scrapping cutting,chiseling,dusting and cleaning exposed reinforcement ,surface of damaged,loose RCC surface and applying one coat of cement slurry and filling the surface with cement cencrete (1:2:4) using 12.5mm garded crushed stone aggregate and finished with cement sand mortar (1;3) using coarse sand in patches area n exc 5 sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surface in at any height all as directed by Engineer-In-Charge Note : Cost of form work and welded mesh for bldg ht upto 12m ,shall be deemed to be included in unit rate quoted by the contractor. |
| 114 | Material and labour for preparation of affected concrete and steel surface as in ceiling of roof slab, beams & chajjas by cleaning with metallic wire brush scrupulously and carrying out the following operations stepwise :-(a) Applying rust remover solution on steel bars by using cotton waste swab or by brush and leave the surface for 15-30 minutes. Remover the loose rust particles by scrubbing with brush and wash the steel surface with water.(b) Apply red oxide primer over cleaned steel surfaces. Apply epoxy bonding agent (adherent solution) over cleaned dust freed old concrete surface. Apply polymer mortar with the help of trowel in single or multilayer as an when required during application and finishing the surface even and smooth.Notes :- (a) The bars which are corroded badly need to be strengthen by placing new bars by means of welding with proper splice length and will be measured and paid separately under appropriate item. The rate of item includes necessary formwork, shuttering, scaffolding, staging hall be deemed to be included in unit rate quoted by the contractor. |
| 115 | S&F in repair PVC SWR pipe 110 mm bore single socketed in any length with rubber ring joints fixed to walls/floor including taking down existing one etc all as specified and directed by Engineer-in Charge. |
| 116 | S&F in repair PVC SWR pipe 75mm single socketed in any length with rubber ring joints fixed to walls including taking down existing one etc all as specified |
| 117 | S&F PVC (SWR) 110 mm dia type bends any radius complete all as specified |
| 118 | S&F PVC (SWR) 75mm dia type bends any radius complete all as specified |
| 119 | S&F 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified |
| 120 | S&F PVC SWR pipe 110 mm dia Branch pieces (Single T),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door complete all as specified |
| 121 | S&F PVC SWR pipe 75 mm dia Branch pieces (Single T),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door complete all as specified |
| 122 | S&F PVC SWR pipe 110 mm dia Branch pieces (Single Y),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door complete all as specified |
| 123 | S&F PVC SWR pipe 75 mm dia Branch pieces (Single Y),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door complete all as specified |
| 124 | S&F PVC SWR pipe 110 mm bore P Trap including taking down existing one etc complete all as specified |
| 125 | S&F PVC SWR pipe 110 mm bore S Trap including taking down existing one etc complete all as specified |
| 126 | S&F PVC SWR pipe 110 mm Junction vent cowl including taking down existing one etc complete all as specified |
| 127 | S&F PVC SWR pipe 75 mm Junction vent cowl including taking down existing one etc complete all as specified |
| 128 | S&F PVC SWR Floor trap pipe 75 mm dia outlet pipe ,plain with grating including jointing with solvent cement etc complete all as specified |
| 129 | S&F 100 mm dia stack clamp made out of 25x4mm Flat iron etc all as specified |
| 130 | S&F 75mm dia stack clamp made out of 25x4mm Flat iron etc all as specified |
| 131 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises |
| 132 | M&L Granite (of any type) work (table rubbed and polished) 20 mm thick Black cherry/Ruby red gang saw cut,mirror polished,premoulded and prepolished Machine cut granite slab in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed or bedding layer in CM 1:4 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge . |
| 133 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed |
| 134 | M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 135 | M&L for coloured glazed tiles of size 450x300x7 mm thick in dados set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed. (Colour and shade as approved by Engr-In-Charge) |
| 136 | M&L 18-20 mm thick gang saw cut,mirror polished,premoulded and prepolished Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:6 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge. |
| 137 | Form work to soffits of suspended slab such as roof slab/Kitchen slab n exc 200mm thick (horizontal/sloping/vertical) with fair finished surface complete all as specified |
| 138 | M & L TMT bars 6mm to 8mm dia. cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified |
| 139 | Demolition of cement concrete is reinforced of any description and in any position not otherwise specifically provided for as specified and directed by Engineer - in - Charge . |
| 140 | M&L Reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in slabs supported on walls, beams, columns deck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge . |
| 141 | S&F stainless steel plate rack of size 90 x 80 x 25cm depth size made out of 0.80mm thick sheet complete all as specified and directed by Engr-in-Charge. |
| 142 | S & F for Factory made Anodised aluminium frame Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 143 | S & F Factory made Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron).window and ventilator shutters, for window/ventilator triple channel fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws incl all accessories etc. complete all as specified etc. complete all as specified |
| 144 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm incl waste coupling and waste pipe etc all as specified |
| 145 | S & F Factory made Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron). window partitions and ventilator shutters, for window/ventilator triple channel side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl all accessories complete all as specified |
| 146 | S & F Factory made Anodised aluminium powder coating grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. |
| 147 | S & F 4.8 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black or transparent in square n.exc 0 .5sqm in each pane all as specified and directed by Engineer-in Charge |
| 148 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engineer-in Charge |
| 149 | Material & Labour for Providing and fixing factory made stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender