Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #56299004

Tender For Repair/Replacement To Brick Drain, Pcc/Interlocking Pathway, Hardstanding, Fencing, Boundary Wall And Certain Misc Works In Tech Area At Af Stn Rajokri Under Ge (Af) Gurgaon

Issued by Statutory Bodies & Commissions/Committees · Gurgaon, Haryana
Tender Value
46 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
19 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair/Replacement To Brick Drain, Pcc/Interlocking Pathway, Hardstanding, Fencing, Boundary Wall And Certain Misc Works In Tech Area At Af Stn Rajokri Under Ge (Af) Gurgaon

BOQ

Name of Work:- Repair/Replacement to brick drain, PCC/interlocking pathway, hardstanding, fencing, boundary wall and certain misc works in tech area at AF Stn Rajokri under GE (AF) Gurgaon
Sl. No. Item Description
1Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified.
2M & L 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base including use of necessary form work.
3M&L for 50mm thick PCC 1:2:4, type B1, using 20mm graded aggregate in floors even and smooth without using extra cement all as specified and as directed.
4M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified.
5M & L 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection finished even and smooth without using extra cement, complete all as specified and as directed.
6M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.
7S&F in for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.
8M&L chequered cement concrete coloured tiles 30cm x 30 cm x 25mm, set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified.
9M&L for Sand (M Sand) filling under interlocking tiles or in foundations, spread and levelled including watering and consolidation complete.
10M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping benching, gola, slightly rounded and similar items complete all as specified.
11M&L for plain cement concrete type-C2 1:3:6 (40mm garaded agg.) in surface channel and drains complete all as specified and directed
12Extra for forming fair finished drain or channel exc 30 cm but n exc 50 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc, complete all as specified and directed.
13Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc, complete all as specified and directed.
14M & L for 38mm wide glass dividing strips, 3mm thick, inserted in position, conforming to design
15Taking down wall panelling and similar work all as specified.
16S&F for solid colour wood grain printed PVC sheets 5mm thick as in wall panelling inclusive of solvent cement incl necesssary PVC frame work for fixing on brick or concrete wall as per specification and drawing.
17S&F in repair steel rolling shutter of thickness 1.25 mm without ball bearing as specified including top cover , anchoring rod , hasp and staple and one shop coat of primer erected in position, gear operated type with bevel gear box and crank handle complete all as specified.
18Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.
19S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed.
20Dismantling wrought iron mild steel work of any descrption not other wise provided for complete all as specified and as directed
21S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410-S complete all as specified.
22S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of any shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240
23S&F framed work such as grills gratings, etc with ends of bar shouldered and/or revited or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanka and similar works confirming to Fe 290 Gde E-165 complete all as specified and as directed.
24S&F Joist, channel, angle or tee sections, post fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250)quality-A
25S&F for MS flat iron fillets in posts and struts in fencing ,drilling holes (for securing wire mesh etc),including necessary drilling ,bolting or riveting etc confirming to Fe 410-0 or fe 310-0
26S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed and to be fitted with washer and the hexogonel or square nut dia 5 to 10 mm not exc 5cm long complete all as specified and as directed
27Excavation in Post Holes ( or similar holes) each not exceeding 0.5 Cum and getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed
28M&L for providing PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed
29Dismantling fencing wire mesh, any type complete all as specified and as directed.
30Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire
31Supply only Chain link MS galvanisd fencing, any size or type
32S&F MS round bar 10 mm dia fixed indepently including hooking ends for chain link fencing conforming to Fe 290 Gde E-165 complete all as specified and as directed
33M & L for welded steel wiremesh fabric supplied and fixed through weldding/fixing to flats,etc complete to wood or steel members, weight per square metre n.exc 4 kg complete all as spcified and directed.
34Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and directed. (each row shall be measured separately)
35S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
36S&F in repair re-inforced punched concertina coil of 600 mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified.
37S&F in repair re-inforced punched concertina coil of 900 mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified.
38Supply and Fixing in repairs, SFRC manhole cover of size 600mm x 600mm x 70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame
39Supply and Fixing in repairs, SFRC cover slabs of size 450mm x 450mm x 40mm thick with frame set in cement mortar 1:4 complete all as specified and as directed Notes-(i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame
40Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed .
41Taking down cement or cement lime plaster on stone/brick wall, ceiling incl raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish outside MoD land and necessary scafolding complete all as specified and directed.
42M&L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed
43M&L for brick work with fly ash bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar (1:4) complete all as specified and as directed.
44M&L for rendering 15mm thick in CM 1:4 with water proofing compounding @3% by wt of cement on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified.Note: WPC shall be measured and paid seperately.
45M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified.
46M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint ( Camouflage Pattern) over a coat of primer premium quality complete all as specified
47M&L for preparation (complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint ( Camouflage Pattern) over priming coat premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer.
48Supply only Liquid Water Proofing compound complete all as directed. Make : Dr. Fixit
49Supply and Fixing in repairs, SFRC drain cover of size 900mm x 600mm x 70mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame
50Supply and Fixing in repairs, SFRC drain cover size1200mm x 300mm x 70mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete.(b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame
51Demolition of Precast cement concrete kerb stone in any floors and paving not exc 15 cm thick above or below ground level all as specified and as directed.
52Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
53M&L for preparation of new concrete surface and applying two coat of synthetic enamel paint exc 10 cm girth or width not other wise described over a coat of primer etc complete all as specified and as directed.
54M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56299004
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 46 Lakhs
LAST DATE 24-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Replacement To Brick Drain, Pcc/Interlocking Pathway, Hardstanding, Fencing, Boundary Wall And Certain Misc Works In Tech Area At Af Stn Rajokri Under Ge (Af) Gurgaon
Basic Detail
Tender No GE/GUR-/NIT-36/2026-27
Bidding Type Tender
Location
City Gurgaon
State Haryana
Key Dates
Publish Date 03 Jul 2026
Submission Date 24 Jul 2026
Open Date 27 Jul 2026
Finance
Tender Value 46 Lakhs
Tender Fee 500
EMD 92000
Exemption Not Available
Document List
8dc2cadf-c2bb-48dd-b7da-705b066d58a5.html
BOQ_869275.xls
TenderDocuments36.pdf
Tendernotice_1 (2).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Jul 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

8dc2cadf-c2bb-48dd-b7da-705b066d58a5.html

xls

BOQ_869275.xls

pdf

TenderDocuments36.pdf

pdf

Tendernotice_1 (2).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders