Tender For Replacement To Joinery, Plumbing Work, Sanitary Fittings And Other Allied Works In Various Unit At Gulpur, Sekhlu And Natu In Aor Of Age B/R-Ii Under Ge 881 Ews.
Tender Value
18 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
5 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement To Joinery, Plumbing Work, Sanitary Fittings And Other Allied Works In Various Unit At Gulpur, Sekhlu And Natu In Aor Of Age B/R-Ii Under Ge 881 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: REPLACEMENT TO JOINERY, PLUMBING WORK, SANITARY FITTINGS AND OTHER ALLIED WORKS IN VARIOUS UNIT AT GULPUR, SEKHLU AND NATU IN AOR OF AGE B/R-II UNDER GE 881 EWS. Contract No : GE/PNH-07/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkhats or frames n.exc 1.5 Sqm (without taking off shutters from frame) complete all as specified and directed. |
| 3 | Taking down chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from frame) complete all as specified and directed. |
| 4 | Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. |
| 5 | 2nd class hard wood (Sal/Hollock) plain, solid straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 6 | Factory made pressed steel frames of size 105mmx60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 7 | Factory made pressed steel frames of size 125mmx60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 8 | Plain cement concrete 1:3:6, type C1( using 20 mm graded stone aggregate) as in hold fast and bed blocks/plates complete all as specified and directed. |
| 9 | 35mm thick 2nd class soft wood (kail) plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified & directed. |
| 10 | 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed. |
| 11 | 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., for windows ,ventilators, etc are provided with stiles and rails sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats, complete all as specified and directed. |
| 12 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. |
| 13 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door,mortise lock, with panel insert of 5.5 mm tinted glass/ 12mm thick coloured PVC sheet, hinges, anodised alumnium snap beading screws etc. complete all as specified and directed. Note:- Panel inserts of sheet glass and PVC sheets shall be measured and paid for separately. |
| 14 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 no.), hinges type B-21 100mm long (3 no.) suitable handle (1 no.) complete all as specified and directed |
| 15 | 12 mm thick Plain colour solid PVC sheet inclusive of solvent cement and fixing as panel insert in door complete all as specified and directed. |
| 16 | 5.5mm thick tinted glass, fixed with snap beading, rubber gasket etc. area of pane exc 0.5 sqm fixed, complete all as specified and directed. |
| 17 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 18 | Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement. S&F in the frame as per manufacturer's instructions complete all as specified and directed. |
| 19 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 20 | Framed steel work for window grills (12 mm square bar), with ends of bars shouldered and riveted or forged into spikes, conforming to Fe 290 Grade E-165, complete in all respects as specified and directed. |
| 21 | 75mm long Mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed. |
| 22 | 100mm long Mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed. |
| 23 | 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 24 | 150 mm long aluminium door handles, cast type anodised and fixed complete all as specified and directed. |
| 25 | 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed |
| 26 | Preparation of new or previously untreated steel or iron surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 27 | Preparation of wood and wood based surfaces of over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 28 | Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified & directed. |
| 29 | Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frames or stone/ concrete, glazed with putty or fixed with beads, complete all as specified and directed. |
| 30 | Sheet glass ordinary quality, 3mm thick, glazing with rubber neoprene packing to aluminium frame in squares not exceeding 0.50 Sqm in each pane fixed, complete all as specified and directed. |
| 31 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs and removing to store complete all as specified and directed. |
| 32 | Dismantling water tanks of any description, exc 500 & n exc 1000 litre capacity and removing to store complete all as specified and directed. |
| 33 | 500 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, , complete all as specified and directed. |
| 34 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, complete all as specified and directed. |
| 35 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed in repair, complete all as specified and directed. |
| 36 | Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 37 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 38 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 39 | Glazed ceramic coloured tiles 350x250x7mm /450mmx350mm x7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 40 | Vitrified Ceramic tiles light shade 8 mm thick area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4,complete all as specified and as directed by Engr-in-Charge |
| 41 | Vitrified Ceramic tiles light shade 8 mm thick area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4,complete all as specified and as directed by Engr-in-Charge |
| 42 | 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 43 | 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base floor, finishing surface even and fair, complete all as specified and directed. |
| 44 | PVC (SWR), type B, 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 45 | PVC (SWR) bends any radius 75mm bore fixed, complete all as specified and directed. |
| 46 | PVC (SWR) junction single (single T) 75mm bore equal or unequal, fixed, complete all as specified and directed. |
| 47 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified and directed. |
| 48 | PVC (SWR), type B, 110 mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 49 | PVC (SWR) bends any radius 110mm bore fixed, complete all as specified and directed. |
| 50 | PVC (SWR) vent cowl 110mm dia fixed in repair, complete all as specified and directed. |
| 51 | Taking up or down GI tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 52 | Taking up or down GI tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 53 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 54 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 55 | Supply & fixed in repair, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified. |
| 56 | Bib tap 15 mm bore, Chromium Plated, fancy type (long shank). with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and directed. |
| 57 | 15mm bore Stop valve/angle cock, cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed |
| 58 | Vitreous china bowl urinal flat back small- normal, size of 465X355X265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and pointing around urinal back in cement etc excluding flushing cistern, flush pipe and waste pipe, fixed in repair, complete all as specified and directed. |
| 59 | 32 mm bore PVC waste pipe, complete all as specified and directed. |
| 60 | Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc fixed in repair, complete all as specified and directed. |
| 61 | Supply and fixing in repair vitreous china pedestal for wash hand basin, complete in all respects as specified and directed. |
| 62 | Supply and fixing in repair PVC cabinet mirror of size 600x360mm and depth as per manufacturer,best approved quality complete all as specified and directed. |
| 63 | Supply and fixing in repair wall mounted corner fiber glass shelf assembly set of three pieces of size 220mm, 175mm and 125mm, complete all as specified and directed. |
| 64 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws, complete all as specified and directed. |
| 65 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified directed. |
| 66 | S &F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed. |
| 67 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified & directed. |
| 68 | Supply & fixed in repair chromium plated shower rose of size 200mmx200mm, with or without swivel joint, including 15mm dia shower arm, 195mm long with 45° bend, complete with with flange, fixed to steel pipe or union, complete all as specified and directed, |
| 69 | Grating doom 100 mm dia with waste hole of PTMT. (Minimum weight 40gms), fixed in repairs, compelte all as specified and directed. |
| 70 | 15mm brass chromium plated basin mixer for mixing hot & cold water screwed down for iron pipe fixed in repair, complete all as specified and directed. |
| 71 | PVC connection 15mm size with CP nuts on both ends of length 600mm fixed in repairs, complete all as specified and directed. |
| 72 | Supply & fixing in repair of vitreous china premium/first quality wash down water closet (floor mounted EWC one piece), white/ivory/off-white (closed pattern), including all necessary accessories like rag bolts and rubber/gasket, complete with built-in flushing cistern of 7.50 litres capacity, soft closing seat & cover with hinging device, PVC outlet pipe and necessary fittings, complete in all respects as specified and directed. |
| 73 | S&F fixing in repairs of vitreous china wash down water closet pan (pedestal pattern), white, excluding fixing bolts, flushing cistern and flushing pipe, but including plastic water closet seat (black, closed pattern) with flat bottom and cover, and mild steel chromium plated or aluminium hinged device, complete in all respects as specified and directed. |
| 74 | S&F fixing in repairs squatting pan of size 580 x 440 mm white, with integral foot rests including connection to trap, flushing cistern and flushing pipe, anti-syphonage pipe, etc. complete including 110 mm dia PVC (SWR) 'S' trap including lime concrete bedding and jointing to existing pipe of floor of size 100mm complete all as specified and as directed. |
| 75 | Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed. |
| 76 | Rendering 15mm thick on fair faces of brick wall surfaces in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 77 | Rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 in two layers (10mm and 5mm thick) mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specifed and directed. Note: Supply only WPC shall be measured and paid for separately. |
| 78 | Preparation of newly plastered or unplastered surface of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr of required shade and colour in approved manufacturer, complete all as specified and directed. |
| 79 | Preparation of old surface of wall and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr of required shade and colour in approved manufacturer, complete all as specified and directed. |
| 80 | Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 81 | Applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over old surfaces on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 82 | Kitchen utensils dish rack of 07 layers comparments made out of S 304 stainless steel of size 765mm length, 910mm height and 250mm depth, fixed on wall with stainless steel/ fasteners and fixed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender