Tender For Day To Day Maintenance Of Services And Internal Periodical And Plaster To Bldgs At Site 1A & 1B Of Certain Unit At Af Stn Jodhpur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
15 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance Of Services And Internal Periodical And Plaster To Bldgs At Site 1A & 1B Of Certain Unit At Af Stn Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone/ boulder masonry, built in cement/ lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by the Engineer-in-Charge. |
| 2 | Material & labour for squared rubble walling, Jodhpur type, brought to courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge. |
| 3 | Ditto all as per item No-2 above but except stone |
| 4 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/above ground level) including floor finishes complete all as specified & directed by the Engineer-in-Charge. |
| 5 | Material & labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified & directed by the Engineer-in-Charge. |
| 6 | Dismatling floor hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premise |
| 7 | M&L for Vitrified ceramic tiles 9mm to 10 mm thick light shade (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointing in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6)complete all as specified and directed. |
| 8 | Material & labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge. |
| 9 | Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge. |
| 10 | Material & labour for Non skid ceramic tiles coloured (square/rectangular) of size 300 X 300 mm and thickness 8-9 mm thick , in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including and over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 11 | Material & labour for glazed ceramic tiles light coloured of size not less than 300x450 mm and thickness 7-8 mm, on vertical surfaces such, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including and over rendering 10 mm thick in CM 1:4 on wall complete all as specified and directed. |
| 12 | Taking down shutters of any description exc 1 sqm but not exceeding 2 sqm each complete all as specified & directed by the Engineer-in-Charge. |
| 13 | Taking down shutters of any description not exceeding 1 sqm each complete all as specified & directed by the Engineer-in-Charge. |
| 14 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified & directed by the Engineer-in-Charge. |
| 15 | Supply & fixing approved colour powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, window, ventilator with one or more rebates or aluminum section of two or more tracks incase sliding windows including jointing cleat for fixing complete all as specified & directed by the Engineer-in-Charge. |
| 16 | Supply & fixing approved colour powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 no.) suitable handle (1 No.) complete all as specified |
| 17 | Supply & fixing approved colour powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 2 Nos in each door, hinges, powder coated aluminium snap beading, screws etc. complete all as specified |
| 18 | Supply & fixing 4 mm thick ordinary quality sheet glass pane area exceeding 0.50 Sqm in each pane with necessary fittings like rubber bedding, glazing clips etc complete all as specified and directed. |
| 19 | S&F in 5.5mm thick Sheet glass, selected quality and glazing with oil putty in squares exc 0.5 sq. m in each pane fixed in door / window shutter cut to required size and fixed with neoprane gasket, complete all as specified & directed by Engineer-in-charge. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including PCC Type B1 1:2:4 (using 20 mm graded granite stone aggregate) for repair of hold fasts and similar works as per specified drawings complete all as specified and as directed. |
| 21 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 22 | Supply and fixing Flush shutters,30mm thick solid core construction, with block board core and plywood face panels, both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. |
| 23 | Supply & fixing stainless steel barrel tower bolt of size 150mm fixed in positions complete all as specified & directed by the Engineer-in-Charge. |
| 24 | Supply & fixing 125mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and as directed. |
| 25 | Supply & fixing stainless steel handles of size 125mm, complete all as specified and directed. |
| 26 | Supply & fixing 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed. |
| 27 | Material & labour for resecuring or easing & adjusting without taking down of wooden shutters of any description not exceeding 1 sqm each complete all as specified and as directed by Engr-in-Charge . |
| 28 | Material & labour for taking down wooden shutter exceeding 1 sqm but not exceeding 2.00 sqm including easing & adjusting and refixing in same opening with same hardware etc complete all as specified & directed by the Engineer-in-Charge. |
| 29 | Supply & fixing in repairs 25 mm dia stainless steel curtain rod decorative type design and pattern approved by GE including both end supports complete all as specified and directed. |
| 30 | Supply & fixing in repairs 25 mm dia stainless steel curtain finials for curtain rod both ends complete all as specified and directed. |
| 31 | Supply & fixing in repairs stainless steel barrel tower bolt of size 150mm of extruded section & fixed in positions complete all as specified & directed by the Engineer-in-Charge. |
| 32 | Supply & fixing in repairs stainless steel handle of size 125mm complete all as specified and directed. |
| 33 | Supply & fixing in repairs 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed. |
| 34 | Supply & fixing in repairs Brass handles, cast type, polished bright of size 125mm complete all as specified and directed. |
| 35 | Supply & fixing in repairs floor door stopper of brass body and tongue with hard drawn steel spring with overall length of cover plate 150 mm, fixed in floor complete all as specified and as directed. |
| 36 | Supply & fixing coloured powder coated aluminium strip of size not less than 0.90 m long and 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed. |
| 37 | Supply & fixing in repairs solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge. |
| 38 | Supply & fixing in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with overall length of cover plate 75 mm, fixed in floor complete all as specified and as directed. |
| 39 | Suppy & fixing in repairs Stainless steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm & fixed with alluminium wire staples complete all as specified & directed by the Engineer-in-Charge. |
| 40 | Supply & fixing 4 mm plain sheet glass ordinary quality and glazing with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane (Beads shall be measured and paid separately) complete all as specified & directed by the Engineer-in-Charge. |
| 41 | Supply & fixing in repairs IInd class hard wood beads , straight (any size) for glazed or gauzed joinery , renewed including mitres etc complete all as specified & directed by the Engineer-in-Charge. |
| 42 | Taking up or down steel tubing of 15 mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified & directed by the Engineer-in-Charge. |
| 43 | Taking up or down steel tubing of 20 mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified & directed by the Engineer-in-Charge. |
| 44 | Supply & fixing 15 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 45 | Supply & fixing 20 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 46 | Refixing of 15mm bore old steel tubing & connection in new or old position (walls, ceilings, floors etc) complete all as specified & directed by the Engineer-in-Charge. |
| 47 | Refixing of 20mm bore old steel tubing & connection in new or old position (walls, ceilings, floors etc) complete all as specified & directed by the Engineer-in-Charge. |
| 48 | Supply & fixing in repairs brass CP Bib taps, fancy type, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. |
| 49 | Supply and fixing in repairs EWC seat cover PVC colour as approved by GE including all fitting arrangements complete all as specified and directed. |
| 50 | Supply and fixing in repairs two way brass chromium plated fancy type bib cock 15mm bore complete all as specified and directed. |
| 51 | Supply and fixing in repairs 15 mm bore center hole basin mixer brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe complete all as specified and directed. |
| 52 | Supply and fixing in repairs 15 mm bore fancy type overhead shower with arm swivel joint chromium plated screwed down of size 200 mm x 200 mm complete all as specified and directed. |
| 53 | Supply and fixing in repairs of fancy type pillar taps brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed. |
| 54 | Supply and fixing in repairs of brass Chromium plates angle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified and directed. |
| 55 | Supply and fixing in repairs tublar towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified and directed by the Engineer-in-charge. |
| 56 | Supply and fixing in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as approved by GE complete all as specified and directed. |
| 57 | Supply and fixing in repairs Sheet glass corner shelf 300mm assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing as approved by GE complete all as specified and directed. |
| 58 | Supply and fixing in repairs brass chromium plated handspray (Health faucet) with flexible pipe length not less than 1.00 m (minimum) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified and directed. |
| 59 | Supply and fixing in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 90gm/each complete all as specified and directed. |
| 60 | Supply and fixing in repairs brass chromium plated Paper holder for EWC complete all as specified and directed. |
| 61 | Supply and fixing in repairs of brass Chromium plates fancy type dual soap dish with high quality complete all as specified and directed. |
| 62 | Supply and fixing in repairs chromium plated grating of size 100 mm dia complete all as specified and directed. |
| 63 | Supply and fixing in repairs for 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) complete all as specified and directed. |
| 64 | Supply and fixing in repairs for 25 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 455 gms) complete all as specified and directed. |
| 65 | Supply and fixing in repairs of PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 66 | Supply and fixing in repairs of vitreous china water closet (squatt pattern) complete including provision of lime concrete bedding fixed in repair of orissa pattern size 580x440mm, white, with and including foot rest (excluding flooring cistern & flush pipe) complete all as specified and directed. |
| 67 | Supply and fixing in repair of vitreous china wash down water closet pan (pedestal pattern) white and trap including connection to drain flush pipe and anti syphonage pipe. |
| 68 | Supply and fixing in repairs PVC valveless syphonic action type flushing cistern low level 10ltrs capicty white, fixed with new brackets complete all as specifed and directed Make. |
| 69 | Supply and fixing in repairs of flush pipe of polythene of low or high density or PVC 32mm for low level cistern complete all as specified and directed. |
| 70 | Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed. |
| 71 | Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with pedestal on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed. |
| 72 | Supply & fixing in repairs 600 x 450 mm moulded glass looking mirror of selected quality and fixed to wooden plugs with chromium plated brass screws and cup washers in postion as directed. |
| 73 | Supply and fixing in repairs aluminium (extruded section body) door closer hydraulically regulated designation No 1 universal type suitable for door shutters upto 700 mm in width and of weight not more than 35 Kg complete all as specified and directed. |
| 74 | Supply and fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 75 | Cleaning and removing all scale and dirt etc from overhead water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place including writting date of cleaning on tank with enamel paint complete all as specified and directed by E-in- Charge for capacity exceeding 250 Ltrs but not exceeding 500 Ltrs |
| 76 | Cleaning and removing all scale and dirt etc from overhead water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place including writting date of cleaning on tank with enamel paint complete all as specified and directed by E-in- Charge for capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs |
| 77 | Supply and fixing in repairs CP waste coupling 32 mm dia with long shank and fly nuts etc for wash basins complete all as specified and directed. |
| 78 | Supply and fixing in repairs CP waste coupling 40mm dia for steel sink / urinal with long shank and fly nuts etc complete all as specified and directed. |
| 79 | Supply and fixing in repairs PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 meter complete all as specified and directed. |
| 80 | Supply and fixing in repairs PVC Flexible waste pipe 40 mm dia with socket for steel sink upto floor level and length not less than 0.60 meter complete all as specified and directed. |
| 81 | Material & labour for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from bib tap/shower/WHB pillar tap/Stop valves complete by Air pressure/ water gravity pressure etc. complete all as specified & directed. |
| 82 | Supply and fixing rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia including dismantling/taking out of old water tank of having capacity of etc 500 Ltr but not exc 1000 Ltr & removing to site etc complete all as specified and as directed. |
| 83 | Supply and fixing rotational moulded polyethylene water storage tank of capacity 500 ltrs (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia including dismantling/taking out of old water tank of having capacity of etc 250 Ltr but not exc 500 Ltr & removing to site etc complete all as specified and as directed. |
| 84 | Supply and fixing in repairs tank cover black (with arrangement for locking) of water storage tank of any capacity complete all as specified & directed. |
| 85 | Repair leakage of 15 mm bore CP bib tap/ Piller tap/ stop cock by replacing of necessary brass spendles as required complete all as specified and directed. |
| 86 | Repair lekage of 15 mm bore CP bib tap/ Piller tap/ stop cock by replacing of necessary brass spendles half round turn as required complete all as specified and directed. |
| 87 | Repair leakage of 15 mm bore CP wall mixer/ CP WHB mixer/ concealed stop cock by replacing of necessary jaquar/ cera brass spendles half round turn as required complete all as specified and directed. |
| 88 | Taking down and re-fixing of old aluminum door shutters in same opening with necessary required repairs and fittings including glass rubber beading and glazing clips, area exc 2.00 sqm but nexc 4.00 sqm each complete all as specified and directed. (Glass pane and wire gauge will be measured and paid separately) |
| 89 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 90 | Cutting of tree branches and felling of trees girth n exc 30 cm (measured one metre above ground level) and removing the tree/branches to a distance not exceeding 50 mtr, clearing site all as directed by Engineer-in-Charge |
| 91 | Supply and fixing sliding telescopic channel high grade mild steel, bright finish or electrogalvanised of size 20\\" as per approved sample |
| 92 | Supply and fixing Magnet catch for CB/ cabinet shutters as per approved sample complete all as specified and directed. |
| 93 | Supply and fixing in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised for 30mm width of flaps (when open), complete all as specified and directed. |
| 94 | Supply and fixing in repairs brass Locks of 4 Levers for cupboard, grade I, size 65mm or equivalent all as specified and directed by Engineer in Charge |
| 95 | Supply and fixing in repairs 18mm thick PVC coated ply of grade 1 quality of both side white colour fixed with screwes ,solvent cement /adhesive to making of furniture /wall panelling/ CBs shutters etc. complete all as specified and directed. |
| 96 | Demolition and breaking up 150 mm bore drain pipes, soil, waste and rain water pipes etc (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, in trenches or floors, including connections and fittings complete all as specified and directed by the Engineer-in-Charge. |
| 97 | Supply & fixing Reinforced Cement Concrete pipes 150mm dia, class NP2, laid & jointed complete with collars complete all as specified and directed by the Engineer-in-Charge. |
| 98 | Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed by the Engineer-in-Charge. |
| 99 | Supply & fixing in repairs PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 100 | Supply & fixing in repairs PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 101 | Supply & fixing PVC (SWR) pipe bends 75 mm dia provided with access door complete all as specified and directed by the Engineer-in-Charge. |
| 102 | Supply & fixing PVC (SWR), 75mm dia of floor trap, with grating including jointing with solvent cement inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 103 | Supply & fixing PVC (SWR) pipe bends 110 mm dia provided with access door complete all as specified and directed by the Engineer-in-Charge. |
| 104 | Supply & fixing PVC (SWR) vent Cowl 110 mm dia complete all as specified and directed by the Engineer-in-Charge. |
| 105 | Supply & fixing PVC (SWR) P/S trap 125/110 mm bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 106 | Material & labour for cutting into existing manholes for connecting new drains of 150 mm internal dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by the Engineer-in-Charge. |
| 107 | Material & labour for cleaning/clearing of blocked under ground sewage lines of any bore, any description and in any position, Any depth, by taking out loose sediment sand, grit, ash, sludge, rags, fibres, vegetation etc by rodding/ any mechanical means, from one manhole to next manhole and washing throughout with fresh water including removing all sludge from the sewage lines in covered vans, trolley and disposed off properly outside the MD land upto the entire satisfaction of engineer in charge complete all as specified and directed |
| 108 | Material & labour for opening & cleaning of blockage from kitchen /bath traps or WC any pattern by rodding or any other manual/mechanical means upto Ist manhole complete all as directed and by Engineer-in-charge. |
| 109 | Cleaning of manhole of any description & size, any depth including lifting up and removing sludge and any other foreign material with vehicle mounted sludge sucker and washing down with water for smooth functioning of sewage line upto the entire satisfaction of engineer in charge complete all as specified and directed. Note:- Sludge obtained from cleaning shall be removed and disposed off properly outside MD Land |
| 110 | Cleaning of septic tank/soakage well by removing sewage sludge, accumulated solid/semi solid sludge and any other foreign material with vehicle mounted sewage/sludge sucker and washing down with water and removing the sludge and other material obtained for disposing outside MD Land upto the entire satisfaction of engineer in charge complete all as specified and directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself). |
| 111 | Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 112 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and directed by the Engineer-in-Charge. |
| 113 | Removing excavated material to a distance exceeding 500.00 metres but not exceeding 1500 metres and depositing where directed at a level not exceeding 1.5 metres above the starting point complete all as specified and directed by the Engineer -in-charge. |
| 114 | Material & labour for 50mm thick sand stone slab of any size as in manholes cover stone etc, set and pointed in cement mortar 1:4 complete all as specified and directed by the Engineer-in-Charge. |
| 115 | S&F (aluminium extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 116 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 117 | S&F Anodised aluminium snap grid frame work (600mm X 600 mm) for false ceiling all as specified |
| 118 | S&F 8 mm thick calcium silicate board if siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid for Exposed metal frame ceiling (Frame work for ceiling shall be measured and paid separately) |
| 119 | Taking down cement or cement lime plaster work any description from brick or stone wall/ ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed by the Engineer-in-Charge. |
| 120 | Material & labour for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar 1:4, surface finished fair and even complete all specified and directed |
| 121 | Material & labour for rendering 10 mm thick on concrete surfaces in ceiling in cement mortar 1:3, surface finished even and smooth without using extra cement complete all as specified and as directed |
| 122 | M&L for preparation of new plastered or unplastered surfaces of ceilling and applying three coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 123 | M&L for preparation of wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls finished even and smooth with sand paper and applying two coats of Oil bound distemper complete all as specified and directed. |
| 124 | M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of white wash over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge. |
| 125 | M&L for preparation of old decorated plastered or unplastered surfaces of ceilling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of white wash over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge. |
| 126 | M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of oil bound distemper white or tinted over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge. |
| 127 | M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying two coat of oil bound distemper white or tinted over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge. |
| 128 | M&L for preparation of old decorated plastered or unplastered surfaces of ceilling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of oil bound distemper white or tinted over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge. |
| 129 | M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls in patches finished even and smooth with sand paper and applying two coats of Oil bound distemper complete all as specified and directed. Please Enable Macros to View BoQ information |
| 130 | M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls in patches finished even and smooth with sand paper and applying two coats of Oil bound distemper complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender