Tender For Repair / Resurfacing Of Roads Including Connected Items At installation Chilka Under Ge Chilka
Tender Value
40 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Resurfacing Of Roads Including Connected Items At installation Chilka Under Ge Chilka
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, paths etc cutting around edges to least 25mm in depth, making good by applying tack coat at 5 Kg per ten sqm, putting in premixed bituminous macadam, well rammed and shield with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping) depth of pot holes exec 30mm complete all as specified and directed. |
| 2 | M&L Premixed bituminous, macadam laid/rolled and compacted to required gradient and camber with using 20mm graded stone aggregate and paving bitumen @ 4% by the weight of total mix (consolidated thickness 75mm thick or less or as required) complete all as specified and directed. |
| 3 | M&L Preparing existing black top road surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc ,complete all as specified. |
| 4 | M&L Applying evenly a priming / tack coat of cutback bitumen RC-70217 at a rate of application of 0.2-0.3 kg/sqm on bituminous as specified in table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed. |
| 5 | M&L for laying 40 mm consolidated thickness bituminous premix semi dense asphaltic concrete with 5.5% binder content with paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient by using hot mix plant and paver equipment complete all as specified and directed. |
| 6 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 7 | S & F in repairs Raised Pavement Markers of size 100 mm x 90 mm x17 mm made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with minimum reflective area of 13 sqcm on each side and fixing with twin polymer epoxy resin based adhesive as per manufacturer's specification / instructions complete all as specified and as directed. |
| 8 | Taking down and refixing in the plastic speed breaker size 500x450mm including provn of new anchor bolt for refixing complete all as specified and as directed by Engr-in-charge |
| 9 | Taking out delinatar of size 75mm dia & 1200mm hight embedded in cement concrete and refixing the same properly in line and leved.complete all as specified and as directed.Note: Excavation and PCC required for fixing will be measured and paid seperatly. |
| 10 | Taking out road sign board of size n.exc 1.00sqm, embedded in cement con concrete and refixing the same properly in line and leved.complete all as specified and as directed. Note: Excavation & PCC required for fixing will be measured and paid seperatly. |
| 11 | Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out soft/loose soil, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50 mtr. |
| 12 | M&L for cement concrete type C-2 (1:3:6) (using 40mm graded aggregate) as in foundations, filling and mass concrete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender