Tender For Special Repair To Sound Proofing And Associated B&R Works At Af Station Halwara Under Ge (Af) Halwara
Tender Value
96.05 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
13 days left
EMD
1.69 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Sound Proofing And Associated B&R Works At Af Station Halwara Under Ge (Af) Halwara
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slab and tiles of any description of any thickness in floor or apron etc laid bedded in cement mortar complete all as specified and directed by Engr-in-charge. |
| 2 | Material and Labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including laid over 15 mm thick screed bed in CM in 1:4 complete all as specified and directed by Engr-in-charge. |
| 3 | Material and Labour for machine cut kota stone slab flooring 18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed with and including bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed by Engr-in-charge. |
| 4 | Material and Labour for Kota stone slab 18mm thick in riser of steps, skirting, dado and on pillar laid over cement screed of 10 mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab with and including rubbing and polishing and screed bed complete all as specified and directed by Engr-in-charge. |
| 5 | Material and Labour for 25 mm thick cement concrete 1:2:4 type B0, (using 12.5mm graded aggregate) as in floor etc and finishing cement concrete even and smooth without using extra cement complete all as specified by and directed by Engr-in-charge. |
| 6 | Dismantling of wall/Ceiling Board with snap grid frame of any description and any thickness including Cover Fillets, Cornices, etc complete all as specified and directed by Engr-in-charge. |
| 7 | Supply and Fixing Elegant fabric tile of Black colour for false ceiling made of perforated Cement Fibre composite 600x600 or 600x1200x 5mm with square edge density 1050kg/m3 covered with fabric on the front side and Acoustics fibre on the back side,water resistance, fire resistant, absorption coffecient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti sag and are installed with aluminium H profile on GI studs 600x600mm centre to centre 2400mmx50mm web tickness 0.5mm flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life,witth a backing of 50mm 1000 GSM thick absorbwool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified by and directed by Engr-in-charge. |
| 8 | Supply and Fixing Sound dampener tile made of compressed wood particle cement of size 1218x1218x12mm made of 10mm cement composites 1250Kg/cum and 2mm dampener sheet having 37 STC as per ISO 354 Installed on wooden studs with a backing of 50mm 1000 GSM thick absorbwool tested as per Fire Retardant IS 15061-2002 for excellent results. Giving upto 40 STC complete all as specified and directed by Engr-in-charge. |
| 9 | Supply and Fixing Anodised GI snap grid frame work for false ceiling for size of grid 605 x 605 mm with hangers 6mm dia GI ( Upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleat made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr-in-Charge , |
| 10 | Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store & rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 11 | Material and Labour for Vitrified ceramic tiles light shade 8 to 9 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 12 | Material and Labour for Vitrified ceramic tiles light shade 8 to 9 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in dado/ skirting with and including 10mm thick rendering in cement mortar 1:6 laying to receive the tile etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge. |
| 13 | Material and labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tiles with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 14 | Material and Labour for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18Sqm but n. exc. 0.38 Sqm as in vertical surfaces, of skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as of floor with and including 10 mm thick rendering in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 15 | Material and Labour for glazed ceramic colour tiles 450X 350X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 10 mm thick rendering on fair faces of brick work or concrete surface in CM 1:3 complete all as specified and directed by Engr-in-charge.. |
| 16 | Supply and Fixing in repair including taking down factory made UPVC white colour Sliding window Three track ( exc 2.00sqm each) made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed by Engr-in-charge. (Note: The unit rate quoted by contractor included 5.5mm thick glass , wire Mesh and includes all other connected accessories. Net Opening will be measured for payment) |
| 17 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charge. |
| 18 | Material and Labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 19 | Material and Labour for rendering 15 mm thick on fair faces of brick work in two layers , 10 mm thick in CM 1:6 and 5mm thick CM 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 20 | Material and Labour rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in celling finished fair and even without using extra cement complete all as specified and directed by Engr-in-charge. |
| 21 | Material and Labour for preparing new plastered surfaces of wall with 1 mm wall care putty with and including applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed by Engr-in-charge. |
| 22 | Materials and labour for preparing new plastered surfaces of wall for applying two coats of cement base paint on walls complete all as specified and directed by Engr-in-charge. |
| 23 | Material and Labour for prepration of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-charge. |
| 24 | Material and Labour for preparing old plastered surfaces of wall and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed by Engr-in-charge. |
| 25 | Material and Labour for preparation of old treated surfaces of wall & applying one coats of cement base paint of walls, chajja,facia,slab etc complete all as specified and directed by Engr-in-charge. |
| 26 | Material and Labour for applying two coat of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces over exc 10cm girth complete all as specified and directed by Engr-in-charge. |
| 27 | Material and labour for one coat of white wash on ceiling surface including preparation of old surfaces complete all as specified and directed by Engr-in-charge. |
| 28 | Material and labour for preparing old painted steel surface of any description not otherwise described for over 10 cm width or girth with and including applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. |
| 29 | Material and labour for preparing old painted wooden surface of any description not otherwise described for over 10 cm width or girth with and including applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. |
| 30 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed by Engr-in-charge. |
| 31 | Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and directed by Engr-in-charge. |
| 32 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed by Engr-in-charge. |
| 33 | Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified and directed by Engr-in-charge. |
| 34 | Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 35 | Hacking out old broken glass (any thickness ,size quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips glazed with putty and removing materials from site of work complete all as specified and directed by Engr-in-charge. |
| 36 | Supply and fixing 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 37 | Taking up or down steel tubing and connections,15mm bore including cleaning for re-fixing or removal from site of work complete all as specified and directed by Engr-in-charge. |
| 38 | Taking up or down steel tubing and connections, 20mm bore including cleaning for re-fixing or removal from site of work complete all as specified and directed by Engr-in-charge. |
| 39 | Supply and fixing 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floorscomplete all as specified and directed by Engr-in-charge. |
| 40 | Supply and fixing 20 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed by Engr-in-charge. |
| 41 | Taking down chowkat or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each.complete all as specified and as directed by Engr-in-Charge. |
| 42 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat mould plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement complete all as specified and directed by Engr-in-charge. |
| 43 | Supply and fixing of factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 44 | Supply and fixing aluminium sliding door bolt 300 mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engr-in-charge. |
| 45 | Supply and fixing Aluminium anodized barrel tower bolts, extruded section 150mm long complete all as specified and directed by Engr-in-charge. |
| 46 | Supply and fixing Aluminium anodized handles, D type, 125mm long complete all as specified and directed by Engr-in-charge. |
| 47 | Supply and fixing mild steel butt hinges medium weight 100mm long for PVC door complete all as specified and directed by Engr-in-charge. |
| 48 | Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified and directed by Engr-in-charge. |
| 49 | Supply and fixing 1000 ltrs capacity rotaional moulded polythelene water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in positions including necessary fittings complete all as specified and directed by Engr-in-charge. |
| 50 | Supply and fixing in repair Brass CP health faucet 25mm dia with crutch or butterfly handle with 1 meter flexible tube and hook complete all as specified and directed by Engr-in-Charge. |
| 51 | Supply and fixing in repair looking mirror of size 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and all as specified and directed by the Engr-in-Charge. |
| 52 | Supply and fixing in repairs Aluminium (Die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engr-in-charge. |
| 53 | Supply & fixing in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel tinned tacks including taking old one steel staples complete all as specified and directed by Engr-in-charge. |
| 54 | Supply and fixing in repair 25mm thick Harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc complete all as specified and directed by Engr-in-charge. |
| 55 | Supply and fixing in repair 15 mm bore bib taps, fancy type chromium plated with crutch or butterfly hadle screwed down ,screwed for iron pipe or brass ferule of complete all as specified and directed by Engr-in-charge. |
| 56 | Supply and fixing in repair 15 mm bore stop valve,fancy type chromium plated (medium) screwed down,high pressure with crutch or butterfly handle,screwed both end for ironb pipe or for union of complete all as specified and directed by Engr-in-charge. |
| 57 | Supply and fixing in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered \\"hot\\" or \\"cold\\" with long screwed shank and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge. |
| 58 | Supply and fixing in repair PVC flushing cistern symphonic action type,10 litres capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe complete all as specified and directed by Engr-in-charge. |
| 59 | Supply and fixing in repair 15mm bore PVC connection pipe 450mm long with PTMT nuts at bolt ends complete all as specified and directed by Engr-in-charge. |
| 60 | Supply and fixing in repair CP towel rail, 20mm dia,600mm long including brass CP brackets complete all as specified and directed by Engr-in-charge. |
| 61 | Supply and fixing in rapair of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-charge. |
| 62 | Supply and fixing in repair of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls complete all as specified and directed by Engr-in-charge. |
| 63 | Supply and fixing in repair of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-charge. |
| 64 | Supply and fixing in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge. |
| 65 | Supply and fixing in repair steel rolling shutters with ball bearing , guide channel as specified including top covers anchoring rod, hasp and staple and one shop coat of primer and errecting in position as indicated complete push or pull or manual type having thickness of laths 1.00 mm including taking down/ dismantling of unserviceable rolling shutter complete all as specified and directed by Engr-in-charge. |
| 66 | Excavation over areas not exceeding 1.5m deep and getting out in soft/ loose soil complete all as specified and directed by Engr-in-charge. |
| 67 | Excavation over areas exceeding 1.5m deep but not exceeding 3m deep and getting out in soft/ loose soil complete all as specified and directed by Engr-in-charge. |
| 68 | Excavation over areas exceeding 3m deep but not exceeding 4.5m deep and getting out in soft/ loose soil complete all as specified and directed by Engr-in-charge. |
| 69 | Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for foundation , gating out in soft/ loose soil complete all as specified and directed by Engr-in-charge. |
| 70 | Returning filling including spreading levelling watering and well ramming in layers n. exc 25 cm in soft /loose soil complete all as specified and directed by Engr-in-charge. |
| 71 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-charge. |
| 72 | Material and labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate for concrete bed to drain pipe , 150 mm bore pipe including packing and under haunching against the sides of pipe after they are laid and tested complete all as specified and directed by Engr-in-charge. |
| 73 | Material and labour for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, and mass concrete complete all as specified and directed by Engr-in-charge. |
| 74 | Material and labour for brickwork with sub class `B' bricks in one brick thick honey comb walling, built in cement mortar 1:3 complete all as specified and directed by Engr-in-charge. |
| 75 | Material and labour for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells complete all as specified and directed by Engr-in-charge. |
| 76 | Material and labour sand filling under floor or in foundation complete all as specified and directed by Engr-in-charge. |
| 77 | Material and labour for RCC M-25 design mix using 20mm graded aggregate as in slab supported on wall , beam and column in floor , landing, balconies , canopies, desk slab in shelves etc complete all as specified and directed by Engr-in-charge. |
| 78 | Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exceeding 200mm thk horizontal or sloping, flat and rough finished surface of concrete complete all as specified and directed by Engr-in-charge. |
| 79 | Material and labour for TMT High strength steel deformed bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed by Engr-in-charge. |
| 80 | Material and labour for TMT High strength steel deformed bars 5mm dia and over upto and including 10mm dia as in stirrups spacers and binder complete all as specified and directed by Engr-in-charge. |
| 81 | Material and labour for for 7mm thick Designer fibre ceiling tile of size 595x595mm in ceiling fixed with screws \\"U\\" angle, \\"T\\" and all other accessories which will required to fixing the ceiling as per manufacture's instruction complete all as specified and directed by Engr-in-charge. |
| 82 | Supply and fixing 5mm thick any colour/Design PVC Hollow block wall panelling sheet inclusive of solvent cement and fixing at site on PVC frame including 5m thick and 35mm wide fillet for fixing of wall panelling as per specifications complete all as specified and directed by Engr-in-charge. |
| 83 | Supply and fixing Powder coating alumunium grill of any pattern/Design weight not less than 1.5 Kg per square meter complete all as specified and directed bu Engr-in-Charge |
| 84 | Supply and fixing in repair for fabrication and fixing of powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium section of bottom and top rail of section114mmx44.45mm1.5mm thick and and lock rail shutter frame of 83mm x 44.45mm x 1.5 mm with and including panels of 5.5 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2mmx16.66mm screwed for fixing fully including hydraulically door closer and , other parts made of mild steel heavy duty and all necessary fittinngs and EPDM rubber packing Each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door shutter and one 200mm long aluminium tower bolt per shutter including taking down old complete all as specified and directed by Engr-in-charge. |
| 85 | Supply and fixing of powder coated ( minimum thickness of powder coating 50 micron ) aluminium frame of size 100mmx44mmx1.5mm) for doors, window, ventilators with one or more rebates including joinng cleat for fixing etc complete all as specified and directed by Engr-in-charge. |
| 86 | Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, complete all as specified and directed by Engr-in-charge. |
| 87 | Taking down copper/aluminium point wiring for (light, fan , socket or power and bell) including unserviceable fittings such as switches, ceiling rose, holders, sockets, bell etc. and making good the distrubed surfaces on wall/floor etc complete all as specified and directed by Engr-in-charge. |
| 88 | Disconnecting and taking down old existing light fitting of any description from any position complete all as specified and directed by Engr-in-charge. |
| 89 | Disconnecting and taking down old existing sub main wiring of any description from any position complete all as specified and directed by Engr-in-charge. |
| 90 | Material and labour for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sq.mm, single core, PVC insulated,unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, including GI terminal boxes with 3 mm thick plastic laminated sheet cover having necessary cutting for fixing switches/ sockets including 1.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for complete all as specified and directed by Engr-in-charge. |
| 91 | One light point/ fan/Exhaust controlled by one switch complete all as specified and directed by Engr-in-charge. |
| 92 | One three pin switch socket 5 amps outlet on Independent board. complete all as specified and directed by Engr-in-charge. |
| 93 | Point wiring using proper colour coding with 1100 Volts grade, 2.5 Sqmm PVC insulated, FRLS, unsheathed, cable confirming to IS-694,PartII, ISI marked with Multistranded copper conductor cable in and including PVC conduit complete all as specified and directed by Engr-in-charge. |
| 94 | Supply and fixing Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed by Engr-in-charge. |
| 95 | Supply and fixing Socket outlet 3 pin, 5A, flush type complete all as specified and directed by Engr-in-charge. |
| 96 | Supply and fixing Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed by Engr-in-charge. |
| 97 | Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed by Engr-in-charge. |
| 98 | Supply and fixing ceiling rose surface bakelite 65x50mm with three terminals complete all as specified and directed by Engr-in-charge. |
| 99 | Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed by Engr-in-charge. |
| 100 | Supply and installation AC 2TR inverter type on high wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2.of capacity complete all as specified and directed by Engr-in-charge. |
| 101 | Supply and fixing of Voltage stabliser 5 KVA for automatic operation single phase naturally air cooled indoor type and designed for input variation between 130 V to 300 volt with output voltage stabilized at 230 V with accuracy of +2.5% complete all as specified and directed by Engr-in-charge. |
| 102 | Supply and fixing in repair MCB SPN 40 to 63 amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge. |
| 103 | Supply and fixing in repair MCB,SP, 6 Amp to 32 Amp, 240 Volt, 50HZ, 10 KA, `C` Series, making electrical connection with the help of Lugs/thimbles complete all as specified and directed by Engr-in-charge. |
| 104 | Supply and fixing LED lights fitting 1x 20W, 220V AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge. |
| 105 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge. |
| 106 | Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-charge. |
| 107 | Supply and fixing submain wiring with 2 X 1.5 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20mm dia medium grade and its accessories including one run of 1.5 sqmm PVC insulated copper conductor to wall with 3mm thick complete all as specified and directed by Engr-in-charge. Note:- (i) Surface conduit shall be laid in celing portion only. (ii) 2 run of main wire and 1 run of earth wire shall be treated as unit length |
| 108 | Supply and fixing submain wiring with 2X 6 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20mm dia medium grade and its accessories including one run of 6 sqmm PVC insulated copper conductor to wall with 3mm thick complete all as specified and directed by Engr-in-charge. Note:- (i) Surface conduit shall be laid in celing portion only. (ii) 2 run of main wire and 1 run of earth wire shall be treated as unit length |
| 109 | Supply and fixing submain wiring with 2X 6 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20mm dia medium grade and its accessories including one run of 6 sqmm PVC insulated copper conductor to wall with 3mm thick complete all as specified and directed by Engr-in-charge. Note:- (i) Surface conduit shall be laid in celing portion only. (ii) 2 run of main wire and 1 run of earth wire shall be treated as unit length |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender