Tender For Repair To Flooring, Roof Treatment Cgi Sheet And Connected Works At Af Stn, Sonegaon.
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
15 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring, Roof Treatment Cgi Sheet And Connected Works At Af Stn, Sonegaon.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets including wind tie in roof coverings complete all as specified and directed. |
| 2 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in valley gutter attached to roof coverings complete all as specified and directed. |
| 3 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as in floor or roof complete all as specified and directed. |
| 4 | S & F for Fe-410-W (Gde-E-250) quality ‘A’ Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including taking down old one complete all as specified and directed. |
| 5 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws of appropriate size with rubber washer for water tight complete all as specified and directed. |
| 6 | S & F white plain water proof tensile PVC fabric flexible, including UV stabilizer, long durability, self-cleaning min 1000 gsm designed to withstand various weather conditions including wind loads and UV exposure meeting fire code BS 5867 and should maintain its colour stability to maintain its white brightness in roof sheet covering with fixing in position as per manufacturer instruction complete all as specified and directed. |
| 7 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | M & L for Brickwork with fly ash bricks of modular size straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 9 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 to be finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M & L for Preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer using chalk whitening over and including a coat of 2 to 3 mm thick wall care putty complete all as specified and directed. |
| 11 | M & L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 12 | Demolition of cement concrete (un reinforced) of any description above roof slab (i.e. as in padding copings etc) including disposal of old materials to a distance not exceeding 100m complete all as specified and directed. |
| 13 | Taking down cement plaster of any description including racking out joints hacking for keys scrubbing down with water etc complete and removal of demolished material to a distance n. exc. 100m complete all as specified and directed. |
| 14 | Supply only Liquid water proofing compound. |
| 15 | M & L for 25mm thick plain cement concrete 1:2:4 Type B0 using 12.5mm graded stone aggregates in cm 1:4 with using water proofing compound as in roof padding to receive the topping layers complete all as specified and directed. |
| 16 | M & L for 1:2:4 Type B1 using 20mm graded stone aggregate as in copings and other work including formwork complete all as specified and directed. |
| 17 | M & L for Rendering 10 mm thick cement plaster on faire faces of brick work or concrete surfaces (top of roof) with using water proofing compound as per manufacturer’s instructions in cement motor 1:3, finished surface even and smooth without using extra cement complete all as specified and directed. |
| 18 | M & L for providing in repairs APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly chamfered (area of flashings, etc., shall be added to the roof area) including taking down old membrane and removing complete all as specified and directed. |
| 19 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 20 | M & L for PVC (SWR) Pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 21 | M & L for PVC (SWR) bends any radius 110mm dia bore fixed to wall or concrete surface complete all as specified and directed. |
| 22 | S & F Stack clamp out of 50mm by 5mm flat iron and 16mm dia round ion stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia pipe complete all as specified and directed. |
| 23 | S & F Angles (Internal or External) or nozzle pieces (Out lets) of 150 mm dia made up of 1.0 mm thickness sheet complete all as specified and directed. |
| 24 | M & L for preparation of old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paints complete all as specified and directed. |
| 25 | M & L for PCC (1:3:6) Type C2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 26 | M & L for preparation of new steel surfaces of any description over 10 cm in width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 27 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. |
| 28 | M & L for 75mm thick Cement concrete 1:2:4, Type B-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 29 | M & L for Glazed ceramic tiles on vertical surface 350X450X6-7 mm thick, over 10mm thick rendering in CM 1:4. Set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 30 | M & L for coloured non-skid ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm in floors etc. (including spacers in tiles where directed) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer complete all as specified and directed. |
| 31 | M & L for light shade Vitrified ceramic tiles 10 mm thick (Square/ rectangular) Polished, area of each tiles n. exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry over and including bedding layer of screed bed 15 mm thick in CM 1:6 and pointed in white/colour cement to match complete all as specified and directed. |
| 32 | Cutting existing 15mm steel tubing for alterations or additions (each cut measured) complete all as specified and directed. |
| 33 | Taking up or down 15 mm bore GI tubing pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 34 | Disconnecting existing tanks exc. 500 ltr and n. exc. 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed. |
| 35 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. |
| 36 | S & F in repair 15 mm stop valve fancy type chromium plated with high pressure, with crutch butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender