Tender For special Repair To Bldg No. P-715 A Chdh And Bldg No. P-733 Store Room Of Certain Unit And Bldg No. P-736 Mt Garage Of Certain Unit And Bldg No. P-719 (Main Office) And special Repair Of Toilet, Bathroom & Sewage Line Of Bldg No. P-713 Of C
Tender Value
1.18 Crore
Estimated cost
Bid Submission
01 Aug 2026
8 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No. P-715 A Chdh And Bldg No. P-733 Store Room Of Certain Unit And Bldg No. P-736 Mt Garage Of Certain Unit And Bldg No. P-719 (Main Office) And special Repair Of Toilet, Bathroom & Sewage Line Of Bldg No. P-713 Of Certain Unit Under Age B/R-Ii At Army Area Jodhpur Under Ge (Army) No. 01
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting of existing overhead water tank exc 500 ltr and m. exc 1000 ltr capacity setting aside (or lowering if required) for repair cleaning etc and hoising and reconnecting and refixing in position complete all as specified & directed by Engr-in-Charge. |
| 2 | S&F in repair rotational moulded polyethylene water storage tanks triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 1000 ltr incl taking out old PVC/RCC tank & removal away from site , complete all as specified & directed by Engr-in-Charge. |
| 3 | S&F in repairs Rotational moulded polyethylene water storage tanks triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 500 ltr incl taking out old PVC/RCC tank & removal away from site, complete all as specified & directed by Engr-in-Charge. |
| 4 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets a). complete all as specified & directed by Engr-in-Charge. |
| 5 | S&F of Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed by Engr-in-Charge. |
| 6 | S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified & directed by Engr-in-Charge. |
| 7 | Demolition of reinforced cement concrete ( reinforcement cut as required to facilitate demotition) of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise complete all as specified & directed by Engr-in-Charge. |
| 8 | S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified & directed by Engr-in-Charge. |
| 9 | Do but 5 mm dia & over but less than 10mm in stirrups/rings & binders complete all as specified & directed by Engr-in-Charge. |
| 10 | Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works (horizontal or vertical) for flat fair finished surfaces of concrete complete all as specified & directed by Engr-in-Charge. |
| 11 | M&L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chajja and in shelve etc complete all as specified & directed by Engr-in-Charge. |
| 12 | Demolition of cement concrete in roof padding damaged\loose cement concrete /bricks tiles from roof / terrace to a depth of average 50 mm including dismantling of existing treatment with APP modified membrane if any cleaning with water and deposing debries outside MoD land complete all as specified & directed by Engr-in-Charge. |
| 13 | Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land. complete all as specified & directed by Engr-in-Charge. |
| 14 | M&L for 25 mm thick PCC type B0, (1:2:4) (12.5mm graded aggregate as in sub base to flooring finishing the surface even and rough to receive topping layer complete all as specified & directed by Engr-in-Charge. |
| 15 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-Charge. |
| 16 | M&L Non-skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including over 15 mm thick screed bed or bedding layers in CM (1:6) for laying in floors finishing complete all as specified & directed by Engr-in-Charge. |
| 17 | M&L for Virified double/single charged Ceramic tiles 9-10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified & directed by Engr-in-Charge. |
| 18 | All as per item 17 above but in vertical surface as skirting incl 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE, complete all as specified and as directed by Engr-in-Charge. |
| 19 | M&L for coloured glazed ceramic tiles area exc. 0.13 sqm and not exc. 0.18 sqm over and incl 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified & directed by Engr-in-Charge. |
| 20 | Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water complete all as specified & directed by Engr-in-Charge. |
| 21 | M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge. |
| 22 | M&L for 15 mm thick rendering in CM 1:4 over stone masonry surfaces & finished fair & even without using extra cement using integral water proofing liquid as per manufacturer's instructions, complete all as specified & directed by Engr-in-Charge. Note: WPC will be measured and paid separately |
| 23 | Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified & directed by Engr-in-Charge. |
| 24 | M&L for Keyed pointing to squared rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified & directed by Engr-in-Charge. |
| 25 | Taking down chowkat with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each complete all as specified & directed by Engr-in-Charge. |
| 26 | Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc 4.0 sqm each complete all as specified & directed by Engr-in-Charge. |
| 27 | M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in bed block for hold fast including necessary form work complete all as specified & directed by Engr-in-Charge. |
| 28 | S&F Anodised aluminium frame powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed by Engr-in-Charge. |
| 29 | S&F Anodised aluminium door/window/ventilator shutters powder coating of any colour (Thickness of powder coating not less than 50 micron) , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc.complete all as specified & directed by Engr-in-Charge. |
| 30 | S&F 5.5 mm thick tinted/forsted sheet glass ordinary Quality and glazing with oil putty in sqaure exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified & directed by Engr-in-Charge. |
| 31 | Supply & fixing of 12 mm thick toughned glass door including all necessary decorative fittings and hydraulic machine mounted in floor complete all as specified & directed by Engr-in-Charge. |
| 32 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). all as specified. |
| 33 | M&L for Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-Charge. NOTE: stainless steel butt hinges and necessary SS. screws shall be paid separately |
| 34 | S&F Anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed complete all as specified & directed by Engr-in-Charge. |
| 35 | S&F Stainless steel butt hinges 100mm size medium wt fixed with steel nut bolts in PVC door frames & PVC shutters. complete all as specified & directed by Engr-in-Charge. |
| 36 | S&f Anodised Aluminium handles 150 mm size D type with plate complete all as specified & directed by Engr-in-Charge. |
| 37 | S&F of 4 mm thick pinheaded figured glass panes of size not. exceeding 0.5 Sqm fixed glazing with oil putty complete all as specified & directed by Engr-in-Charge. |
| 38 | M&L for 30 mm thick guniting in patches on to the required area on RCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at any heights from existing ground floor and at any locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete as specified here in before and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dust over treated surface and applying 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, and removing the debris out side the MOD land in low lying areas and leveling complete all as specified & directed by Engr-in-Charge. |
| 39 | M& L for roof treatment in the following stages :-(a) first Course : M&L for 15 mm thick plaster with CM 1:3 mixed surface even and smooth with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately).(b) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied water proofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106 over laying of Geofibre mesh over a coat of primer. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongational break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must. Note : - 1.The authorized applicator of manufacturer shall be approved by GE. |
| 40 | Taking up or down GI steel /CPVC water tubing 15/ 20 mm bore and connection, including cleaning for refixing or removing from site. complete all as specified & directed by Engr-in-Charge. |
| 41 | Taking up or down GI tubing/CPVC 25 mm bore and connection, including cleaning for refixing or remove to site. complete all as specified & directed by Engr-in-Charge. |
| 42 | Supply & Fixing CPVC tubing having outer dia 20mm SDR-11 Including all fitting (elbow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid in floor complete all as specified & directed by Engr-in-Charge. |
| 43 | Supply & Fixing CPVC tubing having outer dia 25mm SDR-11 Including all fitting (elbow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid in floor complete all as specified & directed by Engr-in-Charge. |
| 44 | M&L for Cutting chases, pinning in, existing work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified & directed by Engr-in-Charge. |
| 45 | S&F in repair of bib cock 15mm dia, cast copper alloy fancy type, with crutch or butterfly handle screwed for iron pipe or for brass ferrule complete all as specified & directed by Engr-in-Charge. |
| 46 | S&F in repairs angular stop valves cast copper alloy chromium plated(ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union complete all as specified & directed by Engr-in-Charge. |
| 47 | S&F stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed in repair complete all as specified & directed by Engr-in-Charge. |
| 48 | S&F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed by Engr-in-Charge. |
| 49 | S&F as in repairs 15mm bore CP central hole basin mixer for mixing hot & cold water popup waste system with 450mm long copper pipe and brass nuts complete all as specified & directed by Engr-in-Charge. |
| 50 | S&F Vitreous china urinal half stall type with including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified & directed by Engr-in-Charge. |
| 51 | S&F in repairs white coloured vitreous china, wash hand basin of size 630mm X 450mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as specified & directed by Engr-in-Charge. |
| 52 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed by Engr-in-Charge. |
| 53 | M&L for 75mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate. complete all as specified & directed by Engr-in-Charge. |
| 54 | M&L for 110 mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate. complete all as specified & directed by Engr-in-Charge. |
| 55 | S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long between flanges with bracket and fixed complete all as specified & directed by Engr-in-Charge. |
| 56 | S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end complete all as specified & directed by Engr-in-Charge. |
| 57 | S&F in repair of vetrious china wash basin white circular including brackets, 32mm bore CP coupling etc complete all as specified & directed by Engr-in-Charge. |
| 58 | S&F in repair Single piece EWC with slim soft close seat cover complete set constellation dual flush (WB consetellation 5 ped constellation, EWC, cistern & lid CON dual flush, seat cover constellation, cistern fitting (water saver-dual flush) etc complete all as specified and directed by Engr -in- charge. |
| 59 | S & F in repairs white vitreous china squatting pan \\"Orissa pattern\\" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap including connection to trap and flushing pipe provision of cement concrete bedding 1:5:10 type E2 complete all as specified & directed by Engr-in-Charge. |
| 60 | S&F in repairs 10 ltrs capacity PVC valve less(Super special colours), (ISI Marked) syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and, cistern colour shall be match WC colour, complete all as specified & directed by Engr-in-Charge. |
| 61 | M&L for Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) complete all as specified & directed by Engr-in-Charge. |
| 62 | S&F Toilet paper holder, vitreous China, coloured box type coloured complete all as specified & directed by Engr-in-Charge. |
| 63 | Dismantaling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc complete all as specified & directed by Engr-in-Charge. |
| 64 | Dismantaling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc complete all as specified & directed by Engr-in-Charge. |
| 65 | Supplying and laying of 75 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified & directed by Engr-in-Charge. (with all fitting) |
| 66 | Supplying and laying of 110 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified & directed by Engr-in-Charge. (with all fitting) |
| 67 | Supplying and laying of 75 mm dia UPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified & directed by Engr-in-Charge.(with all fitting) |
| 68 | Supplying and laying of 110 mm dia CPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified & directed by Engr-in-Charge. (with all fitting) |
| 69 | S&F 75 mm bore UPVC bends any radius with oval acess door complete all as specified & directed by Engr-in-Charge. |
| 70 | S&F 110 mm bore UPVC bends any radius with oval acess door complete all as specified & directed by Engr-in-Charge. |
| 71 | S&F for 110 mm dia UPVC vent cowls, diminishing pieces or tapers (larger bore measured) complete all as specified & directed by Engr-in-Charge. |
| 72 | S&F 32mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 6 Kg/sqcm fixed complete to walls, ceiling or floors etc complete all as specified & directed by Engr-in-Charge. |
| 73 | S&F in repair 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts complete complete all as specified & directed by Engr-in-Charge. |
| 74 | S&F in repair health faucet (ABS body) with 1000mm long flexible mild steel tube with wall hook chromium plated suitable for 15mm pipe complete all as specified and directed by Engineer-in-Charge. |
| 75 | S&F of CP mild steel grating 100mm dia as in repairs. complete all as specified & directed by Engr-in-Charge. |
| 76 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for foundation etc., or forshafts, wells,cesspits, manholes, Pier holes etc not exc 10 sqm on plan and getting out in hard dense soil, complete all as specified & directed by Engr-in-Charge. |
| 77 | Demolition and breaking up drain pipes (Salt glazed ware, AC,DWC HDPE or reinforced concrete) of 150mm bore set in cement mortar including PCC in bed and haunching against side complete all as specified & directed by Engr-in-Charge.Note :- Excavation and earth work shall be measured and paid separately. |
| 78 | Material and labour for cement concrete (1:4:8) type D-2 as in bed to drain 150mm bore pipe including packing under and haunching against the sides of pipes after they are laid complete all as specified & directed by Engr-in-Charge. |
| 79 | Supply & laying jointing and testing 150mm bore reinforced cement concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete, with collars or socket/spigot type laid jointed complete all as specified & directed by Engr-in-Charge. |
| 80 | Material and labour for cement concrete (1:4:8) type D-2 as in bed to drain 200mm bore pipe including packing under and haunching against the sides of pipes for pipe after they are laid complete all as specified & directed by Engr-in-Charge. |
| 81 | Supply & laying jointing and testing 200mm bore reinforced cement concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete, with collars or socket/spigot type laid jointed complete all as specified & directed by Engr-in-Charge. |
| 82 | Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm thick with excavated soil complete all as specified & directed by Engr-in-Charge. |
| 83 | Removing excavated material excavated soil to a distance exc 250m but n exc 500m, and depositing where directed complete all as specified & directed by Engr-in-Charge. |
| 84 | Demolition of stone masonry /block walling built in cement mortar complete all as specified & directed by Engr-in-Charge. |
| 85 | M&L for Pre-cast cement concrete block masonry with solid blocks type of 1:3:6 C1 (20mm graded aggregate), exc. 10 cm in width and setting in mortar, completeset in CM 1:4 complete all as specified & directed by Engr-in-Charge. |
| 86 | M&L for cement concrete type D2 1:4:8 using 40 mm graded aggregate as in foundation, filling and mass concrete complete all as specified & directed by Engr-in-Charge. |
| 87 | M&L for PCC type B1 (1:2:4) using 20 mm graded cushed stone aggregate as in coping, benching and the like incl form work. complete all as specified & directed by Engr-in-Charge. |
| 88 | Supply only integral water proofing compound ISI Marked complete all as specified & directed by Engr-in-Charge. |
| 89 | M&L for preperartion of newly plastered surfaces on wall and applying 2-3 mm wall care putty with fair finished and even surface and applying two coat of oil bound distemper over a coat of primer complete all as specified & directed by Engr-in-Charge. |
| 90 | M&L for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coats of 2-3 mm thick white wall care putti on plastered surface complete all as specified & directed by Engr-in-Charge. |
| 91 | M&L for applying three coats of white wash on newly plastered surface of wall including preparation of surfaces complete all as specified & directed by Engr-in-Charge. |
| 92 | M&L for applying one coat of white wash on old surface of ceiling in including preparation of old surface complete all as specified & directed by Engr-in-Charge. |
| 93 | M&L for applying two coats of cement based paint on newly plastered or unplastered surface of wall including preparation of surface over and including one coat of white wash complete all as specified & directed by Engr-in-Charge. |
| 94 | M&L for applying two coat of cement base paint on old surfaces including preparation of existing wall surfaces complete all as specified & directed by Engr-in-Charge. |
| 95 | M&L for 50mm thick Cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in roof padding and similar work including 10 mm thick plaster with CM 1:3 when concrete is green mixed with water proofing compound complete all as specified & directed by Engr-in-Charge. Note: Supply only WPC shall be measured & paid separately. |
| 96 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:4 complete all as specified & directed by Engr-in-Charge. |
| 97 | M&L for squarred rubble walling Jodhpur type but except stone regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:4 complete all as specified & directed by Engr-in-Charge. |
| 98 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified & directed by Engr-in-Charge. |
| 99 | M&L for Raised pointing in CM (1:3) including raking out joints to random or polygonal rubble, uncoursed or brought upto courses complete all as specified & directed by Engr-in-Charge. |
| 100 | M&L for 75 mm thick cement concrete type C-2 1:3:6 (Using 20 mm graded aggregate) as in plinth protection and similar work. complete all as specified & directed by Engr-in-Charge. |
| 101 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed or bedding layers in CM (1:6) complete all as specified & directed by Engr-in-Charge. |
| 102 | M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade complete all as specified & directed by Engr-in-Charge. |
| 103 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including 15 mm thick screed bed or bedding layers in CM (1:6) complete all as specified & directed by Engr-in-Charge. |
| 104 | S&F of 5.5 mm thick powder coated aluminium decogrill of aperature size 50 X 50 mm in diamond shape or sample approved by GE all as per sample fixed to aluminium framework of windows & ventilators. complete all as specified & directed by Engr-in-Charge. Note : Per unit weight of grill shall be determine by BOO detailed by GE |
| 105 | S&F 4.0 mm thick Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane or complete fixed to aluminium frame work including rubber beading complete all as specified & directed by Engr-in-Charge. |
| 106 | M&L for 100 mm thick Cement Concrete type C-2,1:3:6 (40mm graded aggregate) as sub base to sub floor complete all as specified & directed by Engr-in-Charge. |
| 107 | S&F machine made precast cement concrete blocks (interlocking paver) of 60mm thick M35 grade with 6mm top layers of anti abrasive material laid over and including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand complete all as specified & directed by Engr-in-Charge. |
| 108 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed by Engr-in-Charge. |
| 109 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified & directed by Engr-in-Charge. |
| 110 | S&F of Rolled mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified & directed by Engr-in-Charge. |
| 111 | M&L for cement concrete type B-2 1:2:4 (Using 40 mm graded stone aggr) as foundation filling and mass concrete complete all as specified & directed by Engr-in-Charge. |
| 112 | S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engr-in-Charge. |
| 113 | S&F of Cast ironbody Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified & directed by Engr-in-Charge. |
| 114 | S&F MS chromium plated peg set of five fixing with wall complete all as specified & directed by Engr-in-Charge. |
| 115 | S&F for Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified & directed by Engr-in-Charge. |
| 116 | M&L for Anodised aluminium snap grid of size 605x605mm frame work for false ceiling complete all as specified & directed by Engr-in-Charge. |
| 117 | M&L for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified & directed by Engr-in-Charge. |
| 118 | Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified & directed by Engr-in-Charge. |
| 119 | M&L for demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided (reinforcement cut as required to facilitate demolition) complete all as specified & directed by Engr-in-Charge. |
| 120 | M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 using 20 mm graded stone aggr as in Beams, cantilevers , bressummers, lintel over 1.5 m span including necessary formwork etc. complete all as specified & directed by Engr-in-Charge. |
| 121 | M&L for Plain, galvanised, mild steel sheeting .63 mm, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275complete all as specified & directed by Engr-in-Charge. |
| 122 | M&L for Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges 1.25 mm thick 150mm dia sheet complete all as specified & directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 123 | M&L for Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges 1.25 mm thick 150mm dia sheet complete all as specified & directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender