Tender For Repair And Maintenance Of Br Portion Of Em Installations At Nagtalao Under Ge Banar
Tender Value
25 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
17 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Br Portion Of Em Installations At Nagtalao Under Ge Banar
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified. |
| 2 | Excavating in post holes (or similar holes) each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified. |
| 3 | M & L for rolled steel section as in posts, struts and staples in fencing including cutting to top to shape (swan neck) as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting welding etc and similar work confirming to Fe-290 Gde-165 complete all as specified. Note:- Fencing Poles will be painted before fixing. |
| 4 | M&L for two coats of synthetic enamalled paint over one coat of red oxide primer on new steel surfaces exc 100mm width or girth, including preparation of the surface complete all as specified and directed. |
| 5 | All as per item No 4 above but not exc width or girth 10 cm complete all as specified. Note:- Flat iron will be painted before fixing. |
| 6 | M&L for PCC (1:3:6) type C2 by using 40 mm well graded stone aggregate as in foundation, filling and mass concrete complete all as specified. |
| 7 | Dismantling fencing wire mesh any type and any size |
| 8 | Supply only Chain link MS galvanised fencing, any size or type, complete all as specified and directed. |
| 9 | Fixing only chain link fencing including line wires/ MS round bar (Any numbers), any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire (Note. Supply of flat iron, MS round bar & chain link shall be measured and paid seperately under supply only) |
| 10 | S & F 12 mm dia MS screw bolts any size (machine made) with hexagonal or square heads at one end and screwed the other ends, fitted with washer and one one hexagonal nut exc 5cm long but n exc 10cm complete all as specified. |
| 11 | Supply only MS rounded bars Fe-290 (Gde-165) 10 mm dia and over cut to length and bend to shape as required as in tie bars, secured with nut, bolt and washers complete all as specified. |
| 12 | Dismantling of Plain or corrugated steel sheeting, any gauge,thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 13 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with hot dip galvanised self drilling fasteners with EPDM washers (one fastener on each crest) complete all as specified. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 15 | S&F Rolled mild steel sections as in framing for cladding, glazing & the like fixed with angle cleats & connecting plates, etc.Fe 410-W (Gde-E- 250) quality-A at a height of 8 to12 mtr complete all as specified. |
| 16 | Hacking out old broken glass (any thickness size quality or description from metal frame including punching or drilling our old glazing/springs clips complete all as specified. |
| 17 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified. |
| 18 | S&F in repair 32mm PVC waste pipe for sink/WHB complete all as specified. |
| 19 | Dismantling water tanks cap exc 250 ltr but nexc 500 ltrs , setting aside (or lowering if required) for repairs, cleaning. Cleaning and removing all scale and dirt, etc, from tanks complete all as specified. |
| 20 | S&F ISI marked 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified. |
| 21 | S&F in repair CP 15mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 22 | S&F in repair 10 ltr PVC valve less, symphonic action type dual type flushing, low level, white, with inlet ball valve, float and handle including 600mm long PVC connection and brackets complete all as specified. |
| 23 | S&F in repairs vitreous china squatting pan, Órrisa Patern' size 580mmx440mm white with integral foot rests, embedded and set in PCC 1:5:10 type E2 (using 40mm stone aggregate) and making good to dismantled floor including removing rubbish complete all as specified. |
| 24 | S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm waste cuppling complete all as specified. |
| 25 | S &F in repairs Pillar cock (long nose) chromium plated 15 mm bore complete all as specified. |
| 26 | S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms) complete all as specified. |
| 27 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15mm complete all as specified. |
| 28 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm complete all as specified. |
| 29 | S&F 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified. |
| 30 | S&F 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified. |
| 31 | Taking down chowkats or frames with shutters (w/o taking off shutters) n exc 1.5 sqm each complete all as specified. |
| 32 | Taking down chowkats or frames with shutters (w/o taking off shutters) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified. |
| 33 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & directed (Make : Rajshree, ENGCO Industries) |
| 34 | M&L Factory made solid panel of PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. (Make: Rajshree, ENGCO Industries or equivalent) |
| 35 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., Fe 410-W (Gde E-250) quality-A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified. |
| 36 | S&F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,Both face is covered with decorative face veneer with lipping/frame to match complete all as specified. |
| 37 | S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc divided into squares by Rails and styles , with plain chamfered or rounded mitered and rebated size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete. |
| 38 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified. |
| 39 | S&F sheet glass 4 mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified and directed |
| 40 | S&F in stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified. |
| 41 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons and risers etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 42 | M&L for 20-25mm thick machine cut kota stone flooring over and including 20mm thick screed bed CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified and directed. |
| 43 | M&L machine cut Kota stone 16-18 mm thick in riser of steps, skirting dado and pillar laid over 10 mm thick screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) complete all as specified. |
| 44 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 45 | All as item No 44 above but as in skirting including 10mm thick backing coat on ston masonry surfaces in CM 1:4 complete all as specified. |
| 46 | Dismantling wall tiling including cement mortar bedding (including not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 47 | M&L for coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified. |
| 48 | Taking down cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 49 | M&L for 15mm thick rendering in cement mortar (1:6) on stone masonary /concrete surfaces of wall , finished even and smooth without using extra cement complete all as specified. |
| 50 | M&L for 10mm thick rendering in cement mortar (1:4) on Concrete surfaces of ceiling/chajja/ facia , finished even and smooth without using extra cement complete all as specified. |
| 51 | M&L for 15mm thick rendering in CM 1:4 on stone masonry/concrete surfaces finished even and smooth without using extra cement all as specified. |
| 52 | M/L two coat of OBD on newly plastered/ unplastered surfaces on wall including preparation of surfaces and 1mm wall care putty complete all as specified. |
| 53 | Preparation of newly plastered surfaces of ceiling & applying three coat of white wash complete all as specified. |
| 54 | M&L for preparation new plastered or unplastered surface of wall and applying two coat of cement base paint on walls complete all as specified. |
| 55 | Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land complete all as specified. |
| 56 | M&L for 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified. |
| 57 | roviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 58 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified. |
| 59 | Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land complete all as specified. |
| 60 | M&L for 10mm thick cement mortar 1:4 on roof surfaces and applying two coats of polyurethene (PU) acrylic based water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer's instruction to stop leakage /seepage from roof/wall complete all as specified and directed by Engineer-In-Charge. Note : (i) Quated rate shall be deemed to be included for the work in building/ structure of any height. (ii) The procurement of material and execution of the work of water proofing treatment shall be got executed from one of the following manufacturers approved by GE : M/S Asian paints Ltd (Damp proof ultra) or equivalent |
| 61 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge |
| 62 | M&L for square rubble walling Jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed. |
| 63 | All as per Ser Item No 20 above but except stone complete all as specified and directed |
| 64 | Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n exc 20mm and dressing faces beds and joints as specified and square rubble walling regular course Jodhpur type complete all as specified and directed. |
| 65 | M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified and directed |
| 66 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings,levelling course, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified. |
| 67 | M&L for preparation of new plastered surface of wall and applying two coat of white wash complete all as specified. |
| 68 | Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified. |
| 69 | M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified. |
| 70 | M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface complete all as specified. |
| 71 | M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified. |
| 72 | M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified. |
| 73 | M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces & finishing the surface even & smooth w/o using extra cement complete all as specified. |
| 74 | M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site complete all as specified. |
| 75 | M&L for providing steel scafolding & formwork etc for supporting RCC Slabs etc for carrying out the rehabilitation works complete all as specified.Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of GE shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal. |
| 76 | Repair to rolling shutters and making u/s door free functioning of size exc 5 Sqm each, manual/gear operative type , denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing , oiling to make the system smooth/easy functional , including new nuts & bolts and greasing of gear box if required of existing size by removing old/rusted nuts and bolts , necessary welding & taking down wherever required, including one coat of synthetic enamel paint over old surfacesas directed, giving proper tension to the spring complete all as specified. |
| 77 | S&F in repair steel rolling shutters 1mm thick sheet lath, with out ball bearing, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer; erected in position as indi?cated, complete: push pull or manual type gear operated type with bevel gear box and crank handle complete all as specified. |
| 78 | Supply only safety lever locks mild steel with 4 levers for rolling shutters complete all as specified. |
| 79 | Supply only Ball bearing of size 90/100mm for rolling shutters complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender