Tender For Special Repairs To Road And Connected Allied Works From Memorial To Flag Staff House (Chola Marg) At Dssc Wellington Under Ge Dssc Wellington
Tender Value
72.82 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
20 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Road And Connected Allied Works From Memorial To Flag Staff House (Chola Marg) At Dssc Wellington Under Ge Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE WELLINGTON NAME OF WORK: SPECIAL REPAIRS TO ROAD AND CONNECTED ALLIED WORKS FROM MEMORIAL TO FLAG STAFF HOUSE (CHOLA MARG) AT DSSC WELLINGTON UNDER GE DSSC WELLINGTON Contract No: CWE/ WEL/ OF 2025-26 Bidder Name : SCHEDULE 'A' (BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item of Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder including all Taxes etc.Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category Total amount TOTAL AMOUNT With Taxes Total amount in words |
| 2 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm and depth exc 50 mm and n.exc 100 mm deep and complete all as specified and directed. |
| 3 | Preparing un-surfaced WBM surfaces by brushing with wire brush for removing caked/mud etc. sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat @ 10 Kg per 10 Sqm using Bitumneous cold emulsion Rapid Setting Grade-1 (RS-1) complete all as specified and directed. |
| 4 | M & L for Premix bituminous macadam with binder content 4% by weight of total mix using paving bitumen of grade VG-30,, laid with mechanical paver and compacted to required gradient and camber (consolidated thickness 75mm or less), with 8 to 12 tonne power roller complete all as specified and directed. (Note: The rates are worked out on the basis of binder content of minimum 4% by weight of total mix. No extra payment shall be made for any additional requirement of binder content) |
| 5 | Preparing existing black top surfaces by brushing with wire brush for removing caked/mud etc. sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat @ 5 Kg per 10 Sqm using bitumenous cold emulsion slow setting grade-1 (SS-1) complete all as specified and directed. |
| 6 | Preparing existing black top surfaces by brushing with wire brush for removing caked/mud etc. sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat @ 5 Kg per 10 Sqm using bitumenous cold emulsion slow setting grade-1 (SS-1) complete all as specified and directed. |
| 7 | M & L for bituminous premixed semi dense asphaltic concrete, 40 mm consolidated thickness using paving bitumen of Grade VG-30 with 5.5% binder content by weight of total mix using hot mix plant and laid by using mechanical paver, rolled and compacted, finished including rolling to required gradient and camber with 8 to 12 tonne power roller to required compaction complete all as specified and directed. (Note: The minimum binder content shall be of minimum 5.5% by weight of total mix. However, additional requirement of binder content after mix design (if any), the same shall be provided by the contractor without any extra cost to the Govt.) |
| 8 | M & L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm using bitumen of Grade VG-10 and putting in pre mixed bituminous mecadam using paving bitumen of grade VG-30, well rammed and sealed with binder 9.8 Kg per 10 Sqm binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of pre mixed mecadam binder and chippings) depth of potholes exc 30 mm complete all as specified and directed. |
| 9 | Material and labour for Applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to BS-3262 (1989), either continuous or broken lines over existing or new painting surfaces of cement or bituminous surfaces (continuous lines, centre lines, dashes, stop lines, arrows etc), n.exc 10 cm width laid down through road marking machine using thermo plastic material by incorporating the white glass powder for reflectivity in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as direction of Engr-in-Charge and in accordance with applicable specification complete all as specified and as directed. |
| 10 | Material and labour for Applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to BS-3262 (1989), either continuous or broken lines over existing or new painting surfaces of cement or bituminous surfaces laid down through road marking machine using thermo plastic material by incorporating the white glass powder for reflectivityin width exc 10 cm wide in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as direction of Engr-in-Charge and in accordance with applicable specification complete all as specified and as directed. |
| 11 | S & F in repair Dou-Directional CAT eyes (Road Stud) of size 90x110x17mm made up of weather resistant high impact polymer conforming to ASTM D4280 and having electronically welded micro prismatic lens with abrason resistant coating and fixed with 2 Nos of polymer shanlks of suitable dia and suitable adhesive conforming to IS as per the procedure recommended by manufacturer including making good the disturbed surfaces of the road complete all as specified and as directed. |
| 12 | S & F in repair Poly Carbonate Convex Mirror outdoor type 1000mm dia mounted and fixed to 80mm bore, medium grade MS pipe of 1000mm from NGL with PCC 1:2:4, type B-1 (Using 20mm graded aggregate) block of size 300x300x450mm including necesssary excavation and earth work complete all as specified and directed. |
| 13 | S & F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 14 | S & F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 15 | Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and removing debris from site of work complete all as directed by the Engr-in-Charge |
| 16 | M & L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base for top finish of any descriptions including finish the surface even and rough to receive the top finish complete all as specified and directed. |
| 17 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of aggregate of size n.exc 10mm and below grade and proper embedding/ laying of inter locking paver blocks into the aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandcomplete all as specified and directed. |
| 18 | Demoltion of Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed by the Engr-in-Charge. |
| 19 | M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 20 | M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 21 | M & L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and directed. |
| 22 | M & L for Plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in surface channel, drains etc including necesssary form work complete all as specified and directed. |
| 23 | Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed. |
| 24 | M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 25 | Dismantling of old/existing kerb stone of any size and any descriptions, built in cement and removing debris off the site outside MD land complete all as specified and directed by the Engr-in-Charge. |
| 26 | M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.complete all as specified and directed. |
| 27 | M & L for Preparation of new or previously untreated brick, stone, concrete, asbestos, cement plastered surfaces of any description over 10 cm girth or width not otherwise described by and painting with two coats of synthetic enamel paint over a coat of priming paints plaster coat complete all as specified and directed. |
| 28 | M & L for Preparation of old treated brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. Total in Figures 0.0 0.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender