Tender For Special Repair To Bldg No P-539 (D/S) Or Living At 19 Idsr Under Ge 969 Ews.
Tender Value
45.92 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
10 days left
EMD
91840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-539 (D/S) Or Living At 19 Idsr Under Ge 969 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level), complete all as specified and as directed. |
| 2 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key screbbing down with water etc, complete all as specified and as directed. |
| 4 | M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded aggregate as in slope correction under floor tile, complete all as specified and as directed. |
| 5 | M&L non skid coloured printed ceramic tile 7 to 8 mm thick (Square/rectangular area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4) , complete all as specified and as directed. |
| 6 | M&L non skid coloured printed ceramic tile 7 to 8 mm thick (Square / rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 7 | M & L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4), complete all as specified and as directed. |
| 8 | M&L 20-25mm thick machine cut kota stone slab flooring over 15mm thick cement screed base in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. |
| 9 | M&L 20-25mm thick machine cut kota stone slab in riser of steps, skirting, dado and pillar laid including 15mm thick rendering on and stone masonry surfaces or surface other than fair face of brick-work or concrete surfaces on one side of lathing jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. |
| 10 | M & L rendering 10 mm thick on brick work or cement concrete surfaces in cement mortar 1:4 including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 11 | M & L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick or concrete work or on one side of lathing in CM (1:4) using water proofing compound @ 3% be weight of cement and finished surfaces even and smooth without using extra cement, complete all as specified and as directed.Note : WPC shall be measured and paid separately. |
| 12 | Supply only Integral waterproofing compound, complete all as specified and as directed. |
| 13 | S&F Sheet glass thickness 4.00 mm,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old brioken glass, complete all as specified and as directed. |
| 14 | M&L for preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer , complete all as specified and as directed. |
| 15 | M&L for preparation of newly or previously untreated surfaces and finishing wall surfaces with Acrylic Smooth exterior paint of required shade and applying two coats @ 1.67 ltr/10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed. |
| 16 | M&L for complete removal of existing treatment on old wall surfaces & Finishing walls with Acrylic Smooth exterior paint and applying two coat @ 1.67 ltr/10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed. |
| 17 | M&L for Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 18 | M&L for Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 19 | S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling, complete all as specified and as directed. |
| 20 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed. |
| 21 | Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets, complete all as specified and as directed. |
| 22 | M & L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work, complete all as specified and as directed. |
| 23 | M & L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work, complete all as specified and as directed. |
| 24 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section, complete all as specified and as directed. |
| 25 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 sqcm & n.exc 25 Sqcm in section, complete all as specified and as directed. |
| 26 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excl flushing cistern ) incl flush pipe 60 cm long, complete all as specified and as directed. |
| 27 | S&F in repair vitreous chine wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl braxkets with waste fittings and connection pipe etc including pedestal, complete all as specified and as directed. |
| 28 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and as directed. |
| 29 | S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and as directed. |
| 30 | S&F PVC connection pipe 15 mm size with PTMT nuts of length 450mm fixed to GI tubbing, complete all as specified and as directed. |
| 31 | S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 32 | S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe, complete all as specified and as directed. |
| 33 | S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 34 | S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. |
| 35 | S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, complete all as specified and as directed. |
| 36 | Taking down and replaced with 15 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings/floors, complete all as specified and as directed. |
| 37 | Taking down and replaced with 20 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings/floors, complete all as specified and as directed. |
| 38 | S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed. |
| 39 | S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed. |
| 40 | S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and as directed. |
| 41 | S&F 100mm bore PVC (SWR) 'T 'any radius, complete all as specified and as directed. |
| 42 | S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement, complete all as specified and as directed. |
| 43 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed. |
| 44 | S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed. |
| 45 | S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type, disposal of rubbish, complete all as specified and as directed. |
| 46 | S & F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 47 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc. 1.5 sq. m each (without taking of shutters from the frame) and removal from site, complete all as specified and as directed. |
| 48 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m (without taking of shutters from the frame) and removal from site, complete all as specified and as directed. |
| 49 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. |
| 50 | S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed. |
| 51 | S/F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010, complete all as specified and as directed. |
| 52 | Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed. |
| 53 | S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed. |
| 54 | S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 55 | S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 56 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 57 | S&F Aluminium handles 100 mm , cast type,anodised, complete all as specified and as directed. |
| 58 | S&F Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed. |
| 59 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. |
| 60 | S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed. |
| 61 | S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed. |
| 62 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and as directed. |
| 63 | Demolition of cement concrete (unreinforced) in any position and any thickness (below or above ground level), complete all as specified and as directed. |
| 64 | M&L for cement concrete in roof kerbs, roof padding or mud stops, rounded or chamfered on edges using water proofing compound, complete all as specified and as directed. |
| 65 | M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. |
| 66 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded agrregate) as in sub base of floors, finished even and fair over well/rammed/compacted earth, complete all as specified and as directed. |
| 67 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory ompaction by using plate vibrator, filling he joints with fine sand and cutting of paver block as per required size and attern, finishing and sweeping extra sand, complete all as specified and as directed. |
| 68 | S & F Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including screed bed 15mm thick comple in CM 1:4, complete all as specified and as directed. |
| 69 | M&L for Preparation of un plastered surfaces of ceiling and applying two coat of white wash, complete all as specified and as directed. |
| 70 | M&L for Preparation of un plastered surfaces of wall and applying two coat of white wash, complete all as specified and as directed. |
| 71 | Taking down carefully copper/aluminium point wiring (light, Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors etc. |
| 72 | M&L for point wiring for using 1.5Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches, complete all as specified and as directed. |
| 73 | (a) One light/fan point/Exhaust fan point controlled by one 5 Amps switch one way. |
| 74 | (b) One 3 pin 5 Amp switch socket combination 5 Amps switch socket oulet on independent board. |
| 75 | (c) One 3 pin 3 Amp switch socket outlet on same board with accessories. |
| 76 | (d) One light point controlled by 2 way switches |
| 77 | S&F switch piano flush type single pole, one way 5 Amp 240 volts, complete all as specified and as directed. |
| 78 | S&F socket oulet 2 in 1, 3 pin, 5 amps, Flush type, complete all as specified and as directed. |
| 79 | M&L for point wiring for using 2.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches, complete all as specified and as directed. |
| 80 | S&F Switch socket combination 2 in1, 3 pin,5 Amps and 15 Amp flush type universal, complete all as specified and as directed. |
| 81 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose , complete all as specified and as directed. |
| 82 | S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. |
| 83 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed. |
| 84 | S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, , complete all as specified and as directed. |
| 85 | S&F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed. |
| 86 | S&F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. |
| 87 | Supply and fix LED inverter Bulb 12 Watt, complete all as specified and as directed. |
| 88 | S&F in replacement LED Mirror Light 10 W, Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. suitable for surface mounting on a ceiling or wall, complete all as specified and as directed. |
| 89 | S&F MCB, DB TPN double door, IP-43, 8 way with 200 A rated bus bar having earth terminal including MCCB 125 Amps as incommer and mcb sp as out going for DB SPN complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles, complete all as specified and as directed. |
| 90 | M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete , complete all as specified and as directed.. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM. |
| 91 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc. |
| 92 | S&F exhaust fan steel body,complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specfied and as directed. |
| 93 | S&F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet,complete all as specified and directed. |
| 94 | Supply and fixing 35 W LED New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver suitable for fixing on building, complete all as specified and as directed. |
| 95 | S&F Gl pipe, bracket for building security light fittings made out of 32/40mm dia Gl pipe light grade 1.2m long bent to required angle/shape with and including necessary clamps of 3 sets necessary nuts, bolts & washers of suitable size and painting with two coats of aluminium paint over a coat of red oxide primer, complete all as specified and as directed. |
| 96 | Supply & fixing cubical type hot pressed moulded SMS of size 250 x 200 x 100 mm Sintex SMC/FRP juction box for street light pole mounted terminal box suitable for mounting on round pole and suitable arrangement for fixing bracket complete with one MCB SPN 6-10 amps capacity single pole and 200A Busbar SPN suitable to terminate loop in/out cables upto 35 sqmm , complete all as specified and as directed. |
| 97 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. BEE. Five star rated with brushes direct current motor (BLDC), complete all as specified and as directed. |
| 98 | Supply & laying of UG cable LT 1100 volts grade XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor cross section area 25 Sqmm 4 core laid in trenches or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed |
| 99 | Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in depth for foundation,laying of cables etc or for shafts, wells, cesspits, manholes, pier holes not exc 50 sqm on plan and n exc 1.5 mtr in depth and getting out in soft loose/soil, complete all as specified and as directed. |
| 100 | Removing excavated soil to a distance not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point. complete all as specified and as directed. |
| 101 | Returning filling , including, spreading, levelling and well ramming in layers n.exc 25cm, complete all as specified and as directed. |
| 102 | M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable, complete all as specified and as directed. |
| 103 | M&L for Sub class \\"B\\" bricks laid dry width wise across the line of cable in treanchs as cable protection, complete all as specified and as directed. |
| 104 | Note:- Schedule of credit Rs 1,12,050.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender