Tender For Comprehensive Maintenance Of Map Moti Mandir Under Ge Nagrota
Tender Value
35 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Map Moti Mandir Under Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified and directed. |
| 2 | Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete complete all as specified and directed. |
| 3 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified and directed. |
| 4 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified and directed. |
| 5 | M&L for Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 6 | M&L for Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 7 | M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 8 | S&F 35mm thick flush shutter solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 9 | S & F galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.18mm fixed with tinned tacks or galvanised wire stapple complete all as specified and directed. |
| 10 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 11 | S&F for Framed work as in cupboard, almirah and ceiling frame of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering etc. to be prepered for hanging or sliding with hinges also fastening and fixing complete all as specified and directed. |
| 12 | M&L for 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work incl teak wood beading with lipping/frame to match all complete all as specified and directed. |
| 13 | M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed. |
| 14 | S&F 75mm size hasp and staple safety type aluminium anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 15 | S & F Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 16 | S&F continuous (piano) hinges mild steel, bright finish width of flaps (when open) 30 mm, complete all as specified and directed. |
| 17 | S&F in repair 18/19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 18 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed. |
| 19 | S& F 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed. |
| 20 | S& F 18 mm solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed. |
| 21 | S&FSolid PVC Door Frame of size 50mm x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 22 | S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvent cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified and directed. |
| 23 | Hacking Out Old Broken Glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 24 | S&F for sheet glass palin/coloured 4.00mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all as specified and directed. |
| 25 | S&F for Figured glass palin/coloured 4.00mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all as specified and directed. |
| 26 | M&L for Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 27 | S&F in repair 150mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed. |
| 28 | S&F 75mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and directed. |
| 29 | S&F 100mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and directed. |
| 30 | S&F 150mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and directed. |
| 31 | S&F 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and directed. |
| 32 | S&F in repair 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 33 | S&F300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 34 | S&F in repair 100mm long Aluminium anodised Hasp and staple incl bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 35 | S&F in repair 75mm long Butt Hinges Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and directed. |
| 36 | S&F in repair 100mm long Butt Hinges Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and directed. |
| 37 | S&F in repair Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed. |
| 38 | S&F Metcraft Brass Door viewer (Magic Eye) 180 Degree glass lens with perfect matching main door, complete all as specified and directed.. |
| 39 | S&F in repair 150mm long Cast iron or malleable cast iron Handles, cast type, stove enamelled lack, complete all as specified and directed. |
| 40 | S&F150mm long Extruded aluminium alloy Handles, fabricated type, anodised complete all as specified and directed. |
| 41 | S&FAnodised aluminium frame for doors, windows, ventilators with one or morerebates including joining cleat for fixing etc. complete all as specified and directed. |
| 42 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 43 | S & F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 44 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 45 | S&F Framed work rolled section as in framing compound girder staging for end bars, shouldered and riveted, forged into spikes, framed guard bars, door iron, ladders walk rails, railings, frame work for tanks, water tank, cooler frame as and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete all as specified and directed. |
| 46 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded and pointed in any mortar complete all as specified and directed. |
| 47 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4. ccomplete all as specified and directed. |
| 48 | Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc,area exc. 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed. |
| 49 | S& F 12 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed. |
| 50 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 51 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing coat, complete all as specified and directed. |
| 52 | M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed. |
| 53 | M&L for Non-skid Coloured Designer Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.06 sqm but nexc 0.11 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:4, complete all as specified and directed. |
| 54 | M&L for Non-skid Coloured Designer Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and directed. |
| 55 | All as per ser item No. 54 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:6 on masonry/ concrete surfaces complete all as specified and directed. |
| 56 | M & L for Glazed coloured ceramic tiles in vertical surface 300x200x7mm/350x 250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:3, complete all as specified and directed. |
| 57 | M&L for machine cut Kota stone slab flooring 18-20mm thick, laid over and incl 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed. |
| 58 | M&L for machine cut Kota stone slab in riser of steps,skirting,dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed. |
| 59 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed. |
| 60 | M&L for brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1:6 complete all as specified and directed. |
| 61 | Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed. |
| 62 | M&L for rendering 10mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and directed. |
| 63 | M & L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 64 | Providing and applying plaster of paris putty of 3mm thick wall care putty on wall over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 65 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed. |
| 66 | M & L for Two coats of oil bound distemper on newly plastered surface over a coat of chalk whiting, on plastered surfaces, preparatory to distemping including preparation of surface complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 67 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 68 | M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surfaces complete all as specified and directed. |
| 69 | M&L for Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying with applicator two coat of white wash on walls complete all as specified and directed. |
| 70 | M&L for Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying with applicator two coat of oil bound distemper on walls complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 71 | M&L for Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying with applicator one coat of oil bound distemper on walls complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 72 | Supply only integral water proofing compound CM (1:4) of approved quality and make confirming to IS complete all as specified and directed. |
| 73 | Providing and laying of water proofing treatment to sunken portion including vertical portion by applying cement slurry make with acrylic based polymer modify cementeneuous composite compound and including demolition and filling of sunken floor with and including PCC 1:5:10 type E2 (Using 40mm brick aggregate) complete all as specified and directed(a) First layer of slurry of cement @ 0.488 Kg/sqm with acrylic based polymer modify cementeneuous composite compound @ 0.28Kg/sqm. This layer allowed to air cure for 4 hours(b) Second layer of cement slurry @ 0.242kg/sqm mixed with acrylic based polymer modify cementeneuous composite compound @ 0.125kg/sqm. This layer allowed to air cure for 4 hours(c) The slope shall be 1:20 towards the corner of outer wall and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 20cm(d) 15mm thick plaster in CM 1:3 mixed with WPC to be provided while concrete on green (e) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 0.4Kg/Sqm, complete all as specified and directed. (f) APP modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane, complete all as specified and directed. .(e) Joints of trap WC/Soil pipes shall be properly sealed with sealing compoundNote : (I) Concrete for sunken slabs shall be mixted with water proofing compound (WPC) as per manufactures instructions. Before carrying out water proofing treatment the sunken shall be tested with water for 48 hours for any leakage/dampness is seen in ceiling below. then treatment is again carried out to RCC slab and it is again tested before passing for next stage. (II) Only floor area shall be measured for payment purpose |
| 74 | Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified and directed. |
| 75 | S&F for steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 76 | Fixing only water tubes of 15mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 77 | Taking up or down 20mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified and directed. |
| 78 | M&L for steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 79 | Fixing only water tubes of 20mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 80 | S/F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white colour (excluding fixing bolt, flushing cistern and flush pipe) size 580 x 440mm with integral foot rest connecting flushing cistern and flush pipe complete all as specified and directed. |
| 81 | S/F in repair Vitreous china wash down water closet Pan ( Semi pedestal Pattern-Anglo indian type) white colour (excluding fixing bolt, flushing cistern and flush pipe) size 580 x 440mm with integral foot rest connecting flushing cistern and flush pipe complete all as specified and directed. |
| 82 | S&F in repair seat and cover for pedestal/Anglo indian type pan white / black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device, complete all as specified and directed. |
| 83 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 84 | S&F in repair CP Seat jet with 1.2 meter PVC tube complete all as specified and directed. |
| 85 | S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and directed. |
| 86 | M&L for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. |
| 87 | S&F in repairs size 25mm (01\\") extension nipple complete all as specified and directed. |
| 88 | S&F in repairs size 35mm (1.5\\") extension nipple complete all as specified and directed. |
| 89 | Supply and fixing in repairs internal fittings Kit complete for vitreous china flush cistern with twin flush complete all as specified and directed. |
| 90 | S&F in repair mirror cabinet with PVC body and openable shutter, shelves and size 450 mm x 600 mm complete all as specified and directed. |
| 91 | S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and directed. |
| 92 | S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and directed. |
| 93 | S&F in repair CP 15mm bore wall mixer with hand shower arrangement with connecting legs, wall flanges & wall brackets for hand shower complete all as specified and directed. |
| 94 | S&F in repair, Long body Bib taps cast copper alloy 15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions, complete all as specified and directed. |
| 95 | Supplying and fixing in repairs the internal spindle (face) of 15 mm diameter stop cock / bib tap / angle valve, including taking down the fitting, dismantling as required, replacement of worn-out spindle/face with new one of approved make, refixing, testing for smooth operation and leakage, and making good the disturbed portion complete all as specified and directed. |
| 96 | Supplying and fixing in repairs the internal spindle (face) of 20 mm diameter (half cut) stop cock / bib tap / angle valve, including taking down the fitting, dismantling as required, replacement of worn-out spindle/face with new one of approved make, refixing, testing for smooth operation and leakage, and making good the disturbed portion complete all as specified and directed. |
| 97 | Supplying and fixing in repairs the internal spindle (face) Concealed (Disk) type of 15 mm diameter(half cut) stop cock / bib tap / angle valve, including taking down the fitting, dismantling as required, replacement of worn-out spindle/face with new one of approved make, refixing, testing for smooth operation and leakage, and making good the disturbed portion complete all as specified and directed. |
| 98 | S&F in repair Looking mirror 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 99 | S & F 6 Pin Cloth Hanger wall mounted door mounted bathroom cloth wall hook, Door Hooks Rail for hanging Keys, lvory complete all as specified and directed. |
| 100 | S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 101 | S&F in repair CP Soap Dish fixed in wall complete all as specified and directed. |
| 102 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. |
| 103 | S&F in repair Glass corner Shelf of 300mm long complete all as specified and directed. |
| 104 | S&F in repair CP Grating doom 100mm dia complete all as specified and directed. |
| 105 | M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and directed. |
| 106 | S&F in repair PVC waste pipe 32/40mm dia for WHB complete all as specified and directed. |
| 107 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories) |
| 108 | S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 109 | S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 110 | M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 111 | S&F PVC (SWR) bends 75mm bore complete all as specified and directed. |
| 112 | S&F PVC (SWR) bends 110mm bore complete all as specified and directed. |
| 113 | S&F PVC (SWR) 110mm bore branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. |
| 114 | S&F PVC (SWR) 110mm bore branch piece, double (double Y) equal or unequal provided with access door complete all as specified and directed. |
| 115 | S&F PVC (SWR) 75mm bore Vent cowl complete all as specified and directed.. |
| 116 | S&F in repair Stack clamps made out of 100mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore, complete all as specified and directed. |
| 117 | S&F in repairs, for plate rack made of stainless steel 0.63 mm thick of size 600 X 750 mm fixed to wall with and incuding angle iron brackets of suitable size grouted in cement concrete, complete all as specified and directed. |
| 118 | S&F in repairs, sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 119 | S&F in repairs for Waste coupling of CP (half or full threaded). (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 120 | S&F in repair 32 mm bore PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, complete all as specified and directed. |
| 121 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 122 | S&F in repairs 25mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, end caps etc. ccomplete all as specified and directed. Note :- Quality of all connecting items shall be approved by GE. |
| 123 | S&F in repair 25mm dia Harrison rails, Stainless steel, Chromium Plated with fixing brackets, stops, rollers, end caps etc. complete all as specified and directed. Note:- Quality of all connecting items shall be approved by GE. |
| 124 | M&L for cleaning the surfaces of accessible roof periodically twice for the entire period of contract, complete all as specified and directed. |
| 125 | M & L for Wooden beading of teak wood, bull nosed ,chamfered or rounded fixed with screw to pre laminated board area exc 3 Sqcm and n.exc 6 Sqcm in section complete all as specified and directed. |
| 126 | Providing, Fabricating, supplying and fixing of Mild steel or Iron Work such as doors,windows,guard bard, railling,cuboard, staging any iron work required for welding,repairing, reasecuring of screw complete all as specified and directed. |
| 127 | Taking down carefully unserviceable aluminium point wiring (light, fan, socket bell or power) complete, (fittings such as switches, ceiling rose lamp holder, regulators, sockets, pendants) stacking at site and keeping in safe custody for taking credit, complete all as specified and directed. |
| 128 | M&L for point wiring with PVC insulated sheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and in existing PVC conduit Concealed of any size , fixing acessories inculding sunken anodised pressed terminal box not less than 1.2 mm thick covered with 3 mm thick bakelite laminated sheet cover of suitable size with suitable size screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified and directed.all as specified for the following;- |
| 129 | One light point controlled by one switch 5 Amp. |
| 130 | One ceiling fan/exhaust fan point controlled by one switch 5Amp |
| 131 | One socket out let 5Amp controlled by one switch on same board. |
| 132 | One socket out let 5 Amp controlled by one switch on independent board. |
| 133 | One bell point 5 Amp controlled by one bell push on independent board. |
| 134 | All as per ser item No 128 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15Amp switch on independat board complete all as specified and directed. |
| 135 | S& F in repair switch piano flush type 5 Amps single pole one way complete all as specified and directed. |
| 136 | S&F in repair switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed. |
| 137 | S&F in repair switch socket combination 2 in 1 5 pin 5 /15 Amps flush type complete all as specified and directed. |
| 138 | S&F in repair of ceiling rose surface type 65mm x 50mm 2 to 3 terminal complete all as specified and directed. |
| 139 | S&F in repair Step type fan regulator , 230 volts, 50 HZ, AC complete all as specified and directed. |
| 140 | S&F in repair bell push piano type 5 Amps complete all as specified and directed. |
| 141 | S&F in repair electric bell ding dong 230 volt AC complete all as specified and directed. |
| 142 | Supply in replacement, white / warm / cool white LED Light fitting 1x18 watt complete with all accessories 230V 50 Hz complete all as specified and directed. |
| 143 | Supply & fixing of LED bulb 9 Watt , rechargeable Emergency inverter bulb,cool day light upto 4 hours battery complete all as specified and directed. |
| 144 | S&F in repair decorative wall mounted globe/bulk head, with 9-12 Watt Stylish LED lamp soft diffused light colour white complete all as specified and directed. |
| 145 | Supply & fixing in repair Steel Body Exhaust fan 300 sweep single phase AC 230/240V complete with louver complete all as specified and directed. |
| 146 | Supply and fix in repair electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.(Note :- It should be work with pressure pump also) |
| 147 | Supply and fix in repair electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 10 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.(Note :- It should be work with pressure pump also) |
| 148 | S&F in repair MCB SPN 40 A to 63 A 10 KA 240 volts \\"C\\" series complete all as specified and directed. |
| 149 | S&F in repair MCB single pole 5 to 32 Amps 10 KA 240 volts \\"C\\" series complete all as specified and directed. |
| 150 | M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete including taking down existing UNSV complete all as specified and directed.Note: Two runs of 6Sqmm FRLS PVC insulated unsheathed 1100 volts grade cable and One run of PVC conduit shall constitute as 1 RM for the measurement purpose |
| 151 | Supply and fix Vent Air Exhaust fan 250/300 mm plastic body white colour, 1200 RPM, 230V AC, copper wounded with louvers complete including making connections complete all as specified and directed. |
| 152 | Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 153 | S&F in place of unsv neon indicating lamp, rectangular /round as required at site, complete all as specified and directed. |
| 154 | S&F in place of unsv heating element 2.0 KW, single phase, 230 volt with triangular base suitable for 10/25 Ltr water heater complete all as specified and directed. |
| 155 | S&F in place of unserviceable inlet /outlet assembly of any make of geyser having six/seven/eight /nine hole suitable heater of capacity 10/25 litre complete all as specified and directed. |
| 156 | S&F in place of unsv rubber gasket suitable for six/seven/eight/ nine hole assembly of suitable size of water heater of capacity 25/10 ltr complete all as specified and directed. |
| 157 | S&F submain wiring alongwith earth with the 2x 10.0 sq mm +1 x 10.0 sq mm earth(with phase,Neutral,Earth wire) wire size of FRLS is PVC insulated copper conductor ,single core cable in surface/recessed complete all as specified and directed.Note: Three runs of 10Sqmm FRLS PVC insulated copper conductor, single core cable shall constitute as 1 RM for the measurement purpose. |
| 158 | S&F in place of unsv 4'' long and 1/2'' dia Chrome plated bolt with suitable washers complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender