Tender For Determining The Rates Of Gi Pole/High Mast Pole Under The Street Lighting Department, Nagar Nigam Aligarh.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
12 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Determining The Rates Of Gi Pole/High Mast Pole Under The Street Lighting Department, Nagar Nigam Aligarh.
BOQ
| Sl. No. | Item Description |
| 1 | S/F of 6 mtr G.I octagonal pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thik) having 3mm thickness on RCC foundation including the cost of foundation, foundation bolts, excavation and back filling and required T&P. each pole should be with junction/looping box complete with 20 Amps., 10 KA DP MCB, Screwless dinbar, shorting links, end locks etc., as required complete in all respects . |
| 2 | single arm bracket (1mtr length) |
| 3 | double arm bracket (1mtr length each) |
| 4 | S/F of 7 mtr G.I octagonal pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thik) having 3mm thickness on RCC foundation including the cost of foundation, foundation bolts, excavation and back filling and required T&P. each pole should be with junction/looping box complete with 20 Amps., 10 KA DP MCV, Screwless dinbar, shorting links, end locks etc., as required complete in all respects . |
| 5 | single arm bracket (1mtr length) |
| 6 | double arm bracket (1mtr length each) |
| 7 | S/F of 8 mtr G.I octagonal pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thik) having 3mm thickness on RCC foundation including the cost of foundation, foundation bolts, excavation and back filling and required T&P. each pole should be with junction/looping box complete with 20 Amps., 10 KA DP MCB, Screwless dinbar, shorting links, end locks etc., as required complete in all respects . |
| 8 | single arm bracket (1mtr length) |
| 9 | double arm bracket (1mtr length each) |
| 10 | S/F of 9 mtr G.I octagonal pole of approved make (top dia 70mm, bottom dia 155mm and base plate 12mm thik) having 3mm thikness on RCC foundation including the cost of foundation, foundation bolts, excavation and back filling and required T&P. each pole should be with junction/looping box complete with 20 Amps., 10 KA DP MCV, Screwless dinbar, shorting links, end locks etc., as required complete in all respects. |
| 11 | single arm bracket (1mtr length) |
| 12 | double arm bracket (1mtr length each) |
| 13 | S/F of 10 mtr G.I octagonal pole of approved make (top dia 70mm, bottom dia 155mm and base plate 12mm thik) having 3mm thikness on RCC foundation including the cost of foundation, foundation bolts, excavation and back filling and required T&P. each pole should be with junction/looping box complete with 20 Amps., 10 KA DP MCV, Screwless dinbar, shorting links, end locks etc., as required complete in all respects. |
| 14 | single arm bracket (1mtr length) |
| 15 | double arm bracket (1mtr length each) |
| 16 | Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respects . |
| 17 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 18 | Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 19 | Supply & fixing of 25 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 460 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitablefoundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 20 | Supply and fixing of Tricolor 18-Meter LED Rope Light Lamp base & wattage: 6W/m, 240V, 50Hz color: Orange, White, Green Dimensions (L X W X H) mm 18000 X 11.5 X 6.5 , No. of LEDs: 72/meter with required SPD complete in all respects. |
| 21 | Supply and fixing of warm white 18-Meter LED Rope Light Lamp base & wattage: 6W/m, 240V, 50Hz color: warm white Dimensions (L X W X H) mm 18000 X 11.5 X 6.5 , No. of LEDs: 72/meter with required SPD complete in all respects. |
| 22 | S/B of 600mmx600mmx6mm GI plate vertically for Earthing with its top at least 3metres below ground level Complete with 20mm dia GI pipe and funnel for watring and one earthing lead of one no. 8 to 10 SWG GI wire in 15 mm dia GI pipe up to switch board 30cm square CI frame with hinged cover masonry housing alternate layers of charcoal/ coke and salt at least 150mm thick alround etc. Complete in all respect. |
| 23 | Supplying and making end termination with brass coampression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 24 | S/F 75 mm X 90 mm shackle insulator/100 mm X 65 mm pin insulator including G.I bolts/ spindle nuts etc. complete in all respects |
| 25 | Supply & erection of \\"D\\" clamps of 50 mm X 6 mm flat iron on steel tubulor poles with bolts, nuts etc. Complete in all respects including painting with Aluminium Paints |
| 26 | Painting of electic pole with 2 coats of aluminium paint over red-oxide primer. Complete in all respects Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender