Tender For Converting The Paved Pathway Parallel To Gomti River Front (Lhs) Marine Drive Into A Synthetic Jogging Track, Construction Of Gazebos, Installation Of Benches And Other Necessary Works.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Jul 2026
9 days left
EMD
5.20 Lakhs
Bank guarantee accepted
Document Fee
4366
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Converting The Paved Pathway Parallel To Gomti River Front (Lhs) Marine Drive Into A Synthetic Jogging Track, Construction Of Gazebos, Installation Of Benches And Other Necessary Works.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge., Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)/DSR 2023- 15.2.2 |
| 2 | 12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand)/DSR 2023- 13.4.1 |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete./DSR 2023- 13.80 |
| 4 | Finishing walls with Acrylic Smooth exterior paint of required shade :, New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)/DSR 2023- 13.46.1 |
| 5 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete., Fixed to openings /wooden frames with rawl plugs screws etc./DSR 2023- 9.48.2 |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :, same as item 21 above but on new wood surface/DSR 2023- 13.61.1 |
| 7 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge./DSR - 2020 (Horticulture)- 6.7 |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :, Cement mortar 1:6 (1 cement : 6 coarse sand)/DSR 2023- 6.4.2 |
| 9 | 'Providing & fixing of Dustbin made in mild steel frame with painting & polish and frame wooden member fixed in m.s. frame including painting polishing as per drawing & design all complete in direction of engineer in charge. PSR/- PSR 4394.77 |
| 10 | 'Providing & fixing sand stone Single piece ornamental bench of approved design pattern (1200x450x450MM) and specifications including , all materials, labour and T & P etc. required for proper completion of work as directed by engineer - in -charge PSR/- PSR 4394.76 |
| 11 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)./DSR - 2020 (Horticulture)- 2.1 |
| 12 | Rough dressing the trenched ground including breaking clods./DSR - 2020 (Horticulture)- 2.5 |
| 13 | Fine dressing of the ground./DSR - 2020 (Horticulture)- 2.7 |
| 14 | S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. For singel support ANNEXURE 6 - SL NO. 17/- PSR..03 |
| 15 | S/F of 6 Amp to 32 Amp. SPMCB (10KA) C curve complete in all respect as per direction of Engineer-in-charge. SI No. 1002/18. CAT-A./- DSR 2018 (E/M)-1002 |
| 16 | ( Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TNP-2 Nos. Cat. B. Cubicle Type PWD SI No : 802 (a) Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. ( Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TNP-2 Nos. Cat. B. Cubicle Type PWD SI No : 802 (a)/- PWD SI No : 802 (a) |
| 17 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PWD SI No :725 (A)/- U.P. P.W.D., & C.P.R.I. Certified. PWD SI No :725 (A) |
| 18 | Supply and Laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. 33.01 (Jal Nigam Varanasi SOR) 63mm dia HDPE Pipe PN-6: ClassPE-100/- 33.01 (Jal Nigam Varanasi SOR). |
| 19 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil./DSR 2023- 2.8.1 |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)./DSR 2023- 4.1.2 |
| 21 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :, 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)./DSR 2023- 4.2.2 |
| 22 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge, 25 mm average thickness/DSR 2023- 26.28.3 |
| 23 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge., All kinds of soil/DSR 2023- 2.6.1 |
| 24 | Words with frames and fixed in MS Painting and Acrylic 20 mm sheet, Backlit and Each letter with a size of 2x2 ft./- 2acr20s |
| 25 | Providing and Fixing for Play/Jim area (20mm-14mm SBR and 6mm coloured EPDM granuals (PSR)/- PSR_ |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand)/DSR 2023- 6.1.1 |
| 27 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge., Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent/DSR 2023- 11.56.1 |
| 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete., Hot finished seamless type tubes./DSR 2023- 10.16.2 |
| 29 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete :, 1.60 mm thick with zinc coating not less than 350 gm/m*/DSR 2023- 12.5.1 |
| 30 | 'Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E'/I. Sanction Rate/- LDA Sanctioned Rate |
| 31 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :, In cement mortar/DSR 2023- 15.10.2 |
| 32 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)./DSR 2023- 4.1.8 |
| 33 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete., 1:1½:3 (1 Cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)./DSR 2023- 4.6.1 |
| 34 | Supply, Installation, Testing and Commissioning of 15 W LED Bollard Light with mounting base accessories having LED operating life >50000 burning hours, Input Voltage range of 160V-260V, LED chip make Cree, Citizen, Osram, Nichia. Working temperature -10deg - 60 deg C, colour temprature should be 3000K/4000K/6000K, Good Thermal management System with inbuilt drivers. Corrosion resistant aluminum cast housing and Ingress Protection IP66. Size of the shall be Square 150mm x 150mm x 600mm Height complete in all respect as directed by Engineer-in-charge../- 15wledb |
| 35 | 1454 PWD E&M 2018 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. CAT-AA/- 1454 PWD E&M 2018 |
| 36 | S/E of G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects SI.No. 628/18. PWD E/I 2018/- PWD E/I 2018 66 |
| 37 | S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by E/I. SI. No. 289/18./- S/W |
| 38 | \\"Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect As per PWD schedule 2018 SI No. 807\\" 40 A TPN/0 |
| 39 | S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 10 sq. mm 4 core/- PWD SOR 501 10 sq. mm 4 core 327 |
| 40 | S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501/- PED SOR 501 (a) 35 Sq.mm 3.5Core 373 |
| 41 | S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 (b) 16 Sq.mm 4 Core/- PWD SOR 501 (b) 16 Sq.mm 4 Core 343 |
| 42 | S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 (c) 70 Sq.mm 3.5 core/- PWD SOR 501 (c) 70 Sq.mm 3.5 core 613 |
| 43 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 10 sq. mm/- Supply and fixing of plain or pin type copper tin plated cable socket |
| 44 | S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18. (a) 25 sq.mm./- E/I.SI.No.504/SOR-18. (a) 25 sq.mm. 27 |
| 45 | S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18. (b) 50 sq.mm/- E/I.SI.No.504/SOR-18. (b) 50 sq.mm 48 |
| 46 | S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18. 16 sq. mm 4 core/- psr/21 |
| 47 | Boaring/ drilling borewell of require ddia for casing/ strainer pipe, by suitable method prescribed in IS:2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer Incharge, up to 90 meter depth below ground level. All type of soil ( Sanction Rate) 0-15 m BGL/- P.S.R( 48) |
| 48 | Boaring/ drilling borewell of require ddia for casing/ strainer pipe, by suitable method prescribed in IS:2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer Incharge, up to 90 meter depth below ground level. All type of soil ( Sanction Rate) 30-65M BGL/- P.S.R (48.2) |
| 49 | Boaring/ drilling borewell of require ddia for casing/ strainer pipe, by suitable method prescribed in IS:2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer Incharge, up to 90 meter depth below ground level. All type of soil ( Sanction Rate) 15-30 M/- DAR1623 1 HASED/170 |
| 50 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required., In gratings , frames, guard bar , ladder, railings , brackets , gates and similar works/DSR 2023- 10.25.2 |
| 51 | Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge./DSR - 2020 (Horticulture)- 8.46 |
| 52 | Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge./DSR - 2020 (Horticulture)- 5.3 |
| 53 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Hedge Plant /Ground cover/DSR - 2020 (Horticulture)- 2.57.3 |
| 54 | Supply, assembling, lowering and fixing in vertical position in borewell unplasticized PVC mediumwell casing (CM) pipe of required dia conforming to IS:12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 100 mm nominal size dia PWD SOR 2020-21/DAR No. 23.3.1/- SOR 2020-21 (23.3.1) |
| 55 | Supply, assembling, lowering and fixing in vertical position in borewell unplasticized PVC mediumwell casing (CM) pipe of required dia conforming to IS:12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 100 mm nominal size dia PWD SOR 2020-21DAR No. 23.4.1/- SOR 2020-21 (23.4.1) |
| 56 | Providing and fixing suitable size thre aded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:100 mm dia. PWD SOR 2020 21/DAR No. 23.13.1/- SOR 2020-21 (23.13.1) |
| 57 | Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipe shaving thermal stability for hot & cold water supply including all CPVC plain & brass thre aded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer incharge.40 mm nominal outer dia pipes. PWDSOR 2020-21/DARNo. 18.9.5/- SOR 2020-21 (18.9.5) |
| 58 | Providing & Fixing M.S.clamp of required dia to the top of casing/housing pipe of tubewell as per IS2800 part1 including necessary bolts & nuts of required size complete. 100 mm clamp. PWD SOR 2020-21/DAR No. 23.14.1/- SOR 2020-21 (23.14.1) |
| 59 | Gravel packing in tubewell construction in accordance with IS: 4097 including providing gravel fine/medium/ coarse in required grading & sizes as per actual requirement all complete as per direction of Engineer-in charge. PWD SOR 2020-21/DAR No. 23.8/- SOR 2020-21 (23.8) |
| 60 | Supply/erection of 2HP KSB/Cromptonor equalent submersible pump with motor including 15 sqm 3 core cable, (approx 45 meter length) including cost of steel rope & panel. Sanction Rate/-1014 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender