Tender For Special Repair To Bldg Nos Rh-73 And Khy-14 At Jutogh Cantt Under Ge (I) Jutogh
Tender Value
49.46 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
11 days left
EMD
98920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg Nos Rh-73 And Khy-14 At Jutogh Cantt Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and directed. |
| 3 | M&L for rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished even and fair without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 5 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for preparation of new plastered /concrete surface of wall applying two coats of cement base paint over a coat of chalk whitening complete all as specified and directed. |
| 6 | M&L for preparing new surfaces of walls, plastered or unplastered and applying two coats of oil bound distemper over 2 mm thick putty, complete all as specified and directed. |
| 7 | M&L for preparation of new plastered surface of ceiling applying three coats white wash, complete all as specified and directed. |
| 8 | M&L for preparing surfaces plastered or unplastered and washing, rubbing down and stopping of distempered and painted surface and applying two coats of oil bound distemper over 2 mm thick putty, complete all as specified and directed. |
| 9 | M&L for applying one coat of white washing on ceiling surface, including preparation of old treated/untreated surfaces of walls, cornices etc.by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss, efflorescence salts, trading oil and greasy spots etc., complete all as specified and directed. |
| 10 | M&L for applying one coat of synthetic enamel paint on wooden surface including preparation of old painted wooden surfaces of any description over 10cm width or girth, complete all as specified and directed. |
| 11 | M&L for applying one coat of synthetic enamel paint on steel surface including preparation of old painted steel surfaces of any description over 10cm width or girth, complete all as specified and directed. |
| 12 | M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 13 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 14 | M&L for 75 mm thick PCC 1:4:8, Type D-2, using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement, complete all as specified and directed. |
| 15 | M&L providing 50 mm thick cement concrete 1:3:6 type C–1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work complete all as specified and directed. |
| 16 | M&L for 25 mm thick, PCC 1:2:4, type B–0, as in sub base floor, using 12.50mm graded crushed stone aggregate, finished even & fair without using extra cement complete all as specified and directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 18 | M&L for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 19 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 20 | M&L for non-skid ceramic coloured tiles joint free premium/ 1st quality (square/ rectangular) 7 to 8 mm thick, area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6, complete all as specified and directed. |
| 21 | M&L for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 600 x 7 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:4, complete all as specified and directed. |
| 22 | M&L for vitrified ceramic light shade tiles premium/1st quality 9-10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6, complete all as specified and directed. |
| 23 | M&L for vitrified ceramic light shade tiles premium/1st quality 9-10mm thick of same description as of floor tiles as in serial item No 22 above but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4, complete all as specified and directed. |
| 24 | M&L for machine cut kota stone slab flooring 18 to 22 mm thick of size not less than 550mm x 550mm in floor/tread of step, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 25 | M&L for machine cut kota stone slab flooring 18 to 22 mm thick (kota stone shall be cut from size not less than 550mm x 550mm) in skirting, dado, riser of step etc, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 10 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 26 | M&L for cleaning and removing all scale and dirt etc from PVC/ RCC tanks and mouths of circulating pipe of capacity exceeding 250 liter and up to and including 1000 liter & including taking down and refixing of tank and writing on the tank with synthetic enamel paint not less than 70mm long and 2mm wide of words in shape like cleaned on : 15.06.2024 complete all as specified and as directed.Note :- unit rate shall be included to make small fittings such as elbow, socket, reducer, tee, union etc . |
| 27 | S&F in repair 1000 Liter rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer body, 100% UA stabilized, rust proof, hoisted and fixed in position all as specified in SSR Part-I including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (minimum weight-210 gram), complete all as specified and directed. |
| 28 | M&L for cutting chases in making good to facing where required and pointing in cement mortar 1:3 to end of edges or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tuning or concealed conduit wiring, etc and making good cutting exceeding 10 cm girth in brick walls, complete all as specified and directed. |
| 29 | M&L for taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 30 | S&F in repair galvanized iron tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed. |
| 31 | M&L for taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 32 | S&F in repair galvanized iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed. |
| 33 | S&F 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions as in repair complete all as specified and directed. |
| 34 | S&F in repair 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 35 | S&F in repair fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 36 | S&F in repair bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 37 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 38 | S&F vitreous china wash hand basin white, flat back of size 550mm x400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair complete all as specified and directed. |
| 39 | S&F in repair brass chromium plated shower rose 100mm size swivel type with arm of standard size as per site suitable for 15mm bore pipe complete all as specified and directed. |
| 40 | S&F in repair vitreous china squatting pan, Orissa pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, complete all as specified and directed. |
| 41 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat cover white closed pattern with flat bottom and cover including making connections and fixed in position, complete all as specified and directed. |
| 42 | S&F in repair mild steel chromium plated hand shower (health faucet ABS body) suitable for 15mm dia pipe with 8 mm dia 1.25 mtr long flexible tube and ABS wall hook including making connection, complete all as specified and directed. |
| 43 | S&F in repair 10 ltr PVC valve less symphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections Flush pipes for WC, complete all as specified and directed. |
| 44 | S&F in repair grating doom 100mm dia of stainless steel with or without waste hole complete all as specified and directed. |
| 45 | S&F in repair 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 46 | S&F in repair CP brass wall mixture 3-in-1 system for mixing hot and cold water suitable for 15mm bore pipe complete with 115 mm long bend pipe, connecting legs & wall flange and wall bracket for hand shower, complete all as specified and directed. |
| 47 | S&F in repair 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 48 | S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm, bowl size 410mmx330mmx160mm with 32/40mm bore waste coupling and 32mm bore pvc corrugated pipe 900mm long complete all as specified and directed. Make :– Bluestar /Nirali /Prayag or in equivalent as approved. |
| 49 | S&F in repair aluminium anodized tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 50 | S&F in repair 32 mm dia PVC waste pipe for wash hand basin /kitchen sink etc of standard length, complete all as specified and directed. |
| 51 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed. |
| 52 | Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed. |
| 53 | Taking down shutters of any description area exc 1.00 sqm and not exc 2 sqm each and removing from site complete all as specified and directed. |
| 54 | S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 55 | M&L for cutting holes in exc. half brick but not exc. one brick thick walls, built in mud mortar, for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, Type B-1, as required (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) complete all as specified and directed. |
| 56 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary SS screws shall be measured and paid separately. |
| 57 | S&F double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :–(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces.(b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed window leaf.(c) Vertical mullion shall be ERW hollow T –section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings :i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape– 04 Nos per windowii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enameled 150mm long– 2 Nos per leaf.iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf.(v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leaf |
| 58 | vi) Pintal hinges 12 x 75 mm – 2 Nos each leafvii) 10mm square Guard bar @ 10 cm c/c welded to frame.(viii) Two coats of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws .(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4, type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Note : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessories as mentioned above.(iii) The window up to 1metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are open able. The window more than 1metre width shall have two open able leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/ shutter shall be fixed type. |
| 59 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 45 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 60 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 61 | S&F factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and as directed. |
| 62 | M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in holdfasts complete all as specified and directed. |
| 63 | S&F stainless steel butt hinges 100mm long medium weight complete all as specified and directed. |
| 64 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 65 | S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 66 | S&F 150 mm long aluminium handle fabricated type anodised complete all as specified and directed. |
| 67 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 68 | S&F in repair 300 mm long aluminium sliding door bolts, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and directed. |
| 69 | S&F mild steel 150 mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed. |
| 70 | S&F in repair 150mm long aluminium handles, cast type, anodized complete all as specified and directed. |
| 71 | S&F in repair 100mm MS butt hinge medium weight cold rolled complete including fixed to angle or steel chowkhats etc., complete all as specified and directed. |
| 72 | S&F in repair 150mm long aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 73 | M&L for welding to grills, guard bars, steel windows, fixing of hinges to steel chowkhats and steel door etc., thickness of metal to be welded exc 6mm and not exceeding 9 mm and exceeding 2.5 cm and not exceeding 5.0cm in length, complete all as specified and directed. |
| 74 | Demolition of brick/ stone work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and as directed.. |
| 75 | All as per Srl item No 74.00 above but except bricks (Old serviceable bricks obtained from Srl item No 73.00 here in before), complete all as specified and directed. |
| 76 | All as per Srl item No 74.00 above but except bricks (Old serviceable bricks obtained from Srl item No 73.00 here in before), complete all as specified and directed. |
| 77 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 78 | M&L for reinforced cement concrete 1:2:4, (nominal mix), using 20 mm graded crushed stone aggregate as in chajja etc. and necessary formwork /scaffolding up to 8mtr height, complete all as specified and directed. |
| 79 | M&L for reinforced cement concrete 1:1.5:3, (Nominal Mix), using 20mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and including necessary formwork complete all as specified and directed. |
| 80 | M&L for TMT steel bars 10mm dia and over cut to length, bent to shape reqd including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and directed. |
| 81 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads complete all as specified and directed. |
| 82 | M&L for sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 83 | S&F 3mm thick frosted sheet glass ordinary type and glazing with aluminium beading, rubber packing or oil putty in square n exc 0.5 sqm each pane, complete all as specified and directed. |
| 84 | S&F galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple, complete all as specified and directed. |
| 85 | S&F in repair galvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed to steel/wooden /aluminium window/ frame with tinned tacks or galvanised mild steel wire staple, complete all as specified and directed. |
| 86 | S&F in repair stainless steel tubing of 25 mm dia chromium plated min 1.0 mm wall thickness as in curtain rod complete includingS&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc complete fixed as in repair complete all as specified and directed.Note : For the purpose of measurement and payment running length of curtain rod only shall be considered. |
| 87 | Demolition and breaking up drain pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.. |
| 88 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall complete all as specified and directed. |
| 89 | S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 90 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall complete all as specified and directed. |
| 91 | S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 92 | S&F in repair 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement including fixed in cement concrete complete all as specified and as directed |
| 93 | M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 94 | M&L for PCC 1:5:10, type E–2, using 40mm graded crushed stone aggregate as in filling in sunken portion floor, rounded or chamfered on edges complete all as specified and directed. |
| 95 | Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part thereof) including removing old tar felt, all loose dirt, cement plaster, cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss, small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work complete all as specified and directed. |
| 96 | M&L for providing cement concrete 1:2:4, Type B-1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, padding, rounded or chamfered on edges including from work where ever required complete all as specified and directed. |
| 97 | M&L for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 0.40 liter /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centigrade temperature and viscosity 70–160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standard practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shell be under :–(i) Joint strength in longitudinal and transverse direction at 23 degree centigrade at 650/ 450 N /5 cms(ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centigrade when tested in accordance with ASTM (d–5147)(iii) The laying of membrane shell be got down through the authorized applicator of manufactures of membrane only.(iv) The work shall be carryout at a height up to 12 meter. |
| 98 | M&L for preparation of any description wood, steel, iron, concrete, brick, stone or any other surface of wall /roof applying of two coats of heat resistant paint complete all as specified and directed. |
| 99 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness includingNainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. |
| 100 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 101 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eaves board fixed with self tapping screws, complete all as specified and directed. |
| 102 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 103 | S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc., complete all as specified and directed. |
| 104 | S&F in repair 15mm brass CP wash hand basin/ kitchen sink mixer for mixing hot and cold water completer all as specified and directed. |
| 105 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed. |
| 106 | S&F GI metal suspended ceiling system at all heights of perforated with fleece 600x600x0.5mm TEGULAR EDGE TILES in global white Powder Coated with 60-70 Micron front coating laid on 24mm wide Tee grid – strong section flanges colour white having stitching on the Main Runner, 600 mm and 600 mm Cross Tees with web height of 26mm. The tiles should have Humidity Resistance (RH) of 100%, with Light Reflection of 62%. The main runner spaced at 600 mm max (centre to centre) securely fixed to the structural soffit . Hangers (GI wire of 4 mm dia) to be fixed by approved roof plug, level adjusters and screws etc at 600x600 intervals. The First/ Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 600mm long cross tees to be interlocked between main runners to form 600 x 600 mm with grid module(24x38x0.3mm). Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 600 mm cross tees. Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), including PVC clips to hold the ceiling tile, complete all as specified and directed. |
| 107 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm bore pipe line, complete all as specified and directed. |
| 108 | Dismantling timber scantlings, unframed work of size 40 sqcm and over in section, in any position in any position with nails etc., complete all as specified and directed. |
| 109 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 110 | M&L for sunken floor water proofing treatment complete all as under :–including demolition of existing and removal from site complete-(A) Scrapping the surface with wire brush and cleaning with water and allow to dry.(B) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound.(C) 15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape).(D) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound.(E) Apply one coat of hot bitumen grade 85/25 conforming to IS 702 @ 1.2 kg/sqm.(F) Supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm.(G) Applying one coat of hot blown bitumen grade 85/25 conforming to IS–702 @1.20 kg/sqm.(H) Curing the sunken portion with water min 48 hours by ponding.(J) Fixing 50mm bore GI pipe medium grade as in spout of 0.60 mtr length in each sunken. |
| 111 | S&F for stainless steel plate rack standard size 786mmx914mm x 264mm complete and fixing with rawl plug and steel screws of wt not less than 8 kg each, complete all as specified and directed. Make:– Bluestar /Nirali /Prayag or in equivalent as approved. |
| 112 | S&F in repair glass corner shelf 8mm thick including CP railing radius 200mm complete all as specified and directed. |
| 113 | M&L for rendering 15mm thick even and smooth(Without using extra cement) in cement plaster 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 114 | M&L for rough cast plaster complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:3 not less than 15 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and directed. |
| 115 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 116 | M&L for preparation of new surface and applying two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building / tower complete all as specified and directed. |
| 117 | M&L for Complete removal of existing treatment on walls and applying two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building / tower complete all as specified and directed. |
| 118 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and directed. |
| 119 | M&L for mild steel TMT bars of 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 120 | M&L for cutting out concrete blocks, slabs, brickwork or stone masonry (in alternate course), forming toothings and bonding new work in CM 1:4, into old work, including new materials entering old wall PCC 1:2:4, type B-1, using 20mm graded aggregate crushed stone aggregate, complete all as specified and directed. |
| 121 | Dismantling structural steel work including doors, gates, post but excluding framed trusses etc complete all as specified and directed. |
| 122 | Demolition, cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 123 | M&L for providing cement concrete 1:2:4, Type B-0, using 12.5mm graded crushed stone aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth, string, lacing courses, parapets and railings up to 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 124 | M&L for RCC type M-25 mix using 20mm graded aggregates as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 125 | M&L for 75 mm thick, cement concrete 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in path/ plinth protection complete all as specified and directed. |
| 126 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and directed.. |
| 127 | S&F factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 128 | S&F steel windows or ventilators ,fixed type, with glazing bars complete all as specified and directed. |
| 129 | S&F for aluminium anodized 100mm long But hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodized and fixed, type B-2, complete all as specified and directed. |
| 130 | S&F 300mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 131 | S&F 150 mm MS ordinary rat tail rod pattern springs including roller and roller plate fixed to wooden chwkhats or welded to angle iron door frames, complete all as specified and directed. |
| 132 | M&L for non-Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry over screed bed of 15 mm thick in CM 1:4 and pointed in white or coloured cement to match, complete all as specified and directed. |
| 133 | M&L for chequered cement concrete tiles 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1 :4, complete all as specified and directed. |
| 134 | M&L for machine pressed rubber moulded precast coloured concrete interlocking paver block, any shape and size conforming to IS 15658-2006 of 80 mm thickness, grade M-40 with grey cement and no pigments, complete all as specified and directed |
| 135 | S&F in repair of ISI marked 20mm bore stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 136 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 137 | S&F in repair CP soap dish approximate size 160x 160x90mm embedded in the wall complete all as specified and as all directed. |
| 138 | M&L for 500 Liters rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including taking down of tank complete all as specified and directed |
| 139 | S&F ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 140 | Dismantling of 100/ 75mm cast iron or re-inforced concrete drain pipes or PVC pipe any dia, set in cement mortar including taking out of trenches, if required, complete all as specified and directed. |
| 141 | M&L for rolled mild steel framed work as in door ornamental and intricate design of door or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing conforming to Fe-410-W,(Gde-E-250), quality-'A', complete all as specified and directed. |
| 142 | S&F false ceiling with semi perforated 12 mm thick micro tegular edged at all heights with GRG(glass fiber reinforced gypsum ) false ceiling tiles of size 595mmx595mm of approved texture ,design and pattern having moisture content less than 2% ,humidity resistance of 99% ,NRC 0.5 to 0.75 as per IS 8225-1987 ,non- combustile as per BS475 (part-4) -1970 and light code description unit rate No.429 SUB HEAD :26.0 new technologies and material reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 gms per sqm including both sides ) comprising of main -T runners of size 15x32mm of length 3000mm, cross T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600 mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 gms per sqm ) i.e., 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.4mm of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. complete all as specified and directed. |
| 143 | M&L for PCC 1:4:8, Type D-2, 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 144 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in surface channel and drain etc., including necessary formwork and smooth fair finish complete all as specified and directed. |
| 145 | S&F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.60mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 146 | S&F plain, black, 1.00mm thick mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings length and girth as fixed with grade of zinc coating of 275 ,self thread making steel screws of length not less than 75 mm fixed in steel or wooden member and including making necessary hole for water to rain down pipe and including necessary welding work complete all as specified and directed. |
| 147 | S&F for rolled mild steel in plates channels (plain or chequered), square cut or notched (ordinary and counter sunk) forming holes, without any attachment, of Fe-410-W, (Gde E-250), quality-B, complete all as specified and directed. |
| 148 | S&F mild steel rag or Lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30cm long and 12mm dia of neck, complete all as specified and directed |
| 149 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and directed. |
| 150 | M&L for second class hard-wood, timber framed and fixed, clean sawn, in scantlings, complete all as specified and directed |
| 151 | Taking down roof trusses, coupled rafters or trussed beams, clear span above 4 meters & up to 8 meters, complete all as specified and directed. |
| 152 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 153 | Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. ), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 154 | M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC conduit 20mm concealed wiring with all fittings and accessories, terminated to sunken box and laminated sheet of suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light point control by one, one way switch complete all as specified and directed. |
| 155 | All as per Srl item No 153.00 above but for One bell /buzzer point controlled by one push button, complete all as specified and directed. |
| 156 | All as per Srl item No 153.00 above but for two way switches, complete all as specified and directed. |
| 157 | All as per Srl item No 153.00 above but for one 3 pin socket outlet 5 amps, on independent board, complete all as specified and directed. |
| 158 | All as per Srl item No 153.00 above but for one 3 pin socket outlet 5 amps, on same board with other switches, complete all as specified and directed. |
| 159 | All as per Srl item No 153.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FRLS-H PVC insulated unsheathed multistranded copper conductor cable and with 2.5 Sqmm FRLS-H PVC insulated unsheathed multistranded copper conductor as earth wire, complete all as specified and directed |
| 160 | S&F switch piano flush single pole, one way 5 Amp ( ISI marked) complete all as specified and directed. |
| 161 | S&F Bell push, flush type, 5 amp ( ISI marked) complete all as specified and directed. |
| 162 | S&F switch piano flush single pole, two way 5 Amp ( ISI marked) complete all as specified and directed. |
| 163 | S&F switch piano flush single pole, one way 15 Amp ( ISI marked) complete all as specified and directed. |
| 164 | S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type complete all as specified and directed. |
| 165 | S&F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal complete all as specified and directed. |
| 166 | S&F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked) complete all as specified and directed. |
| 167 | S&F Bell, AC, 230 volts, single pole complete all as specified and directed. |
| 168 | S&F LED tube light along with fixture, 1x 20 watt, (4 Feet) wall mounted LED battern, extruded aluminium, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements, complete all as specified and directed. |
| 169 | S&F LED tube light along with fixture, 1x 10 watt, (2 Feet) wall mounted LED battern, extruded pvc , heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 170 | M&L for lamp holder (Angle) PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 171 | S&F LED lamp 12 watt, complete all as specified and directed. |
| 172 | S&F LED building security light 35 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed by Engineer-in Charge. |
| 173 | S&F LED light fitting 10W, IP54 bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv existing fittings complete all as specified and directed. |
| 174 | S&F LED wall mounted decorative wall bracket luminaries including 9W LED lamp connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv existing fittings complete all as specified and directed. |
| 175 | M&L for taking down existing geyser carefully of any capacity, any make without damaging from bathroom and to be kept in safe custody until completion of finishing work, including any type of repairing required on it for making the geyser in full serviceable condition complete all as specified and directed. |
| 176 | Fixing only geyser received from item no 9 above and connecting up including fastener and making the proper connection of geyser complete all as specified and directed. |
| 177 | M&L for taking down including disconnecting the electric connection of exhaust fan any type and dismantling blades, greasing and painting the whole assembly complete all as specified and directed. |
| 178 | Fixing only exhaust fan received from Srl item No 176.00 above and connecting up including fastener and provision of suitable size of copper cable from connector of exhaust fan to ceiling rose complete all as specified and directed. |
| 179 | M&L for taking down existing single phase meter carefully of any type any make including disconnecting the electric connection and to be kept in safe custody until completion of finishing work for refixing complete all as specified and directed. |
| 180 | Fixing only single phase meter received from Srl item no 178.00 above with necessary connection with copper conductor for connection of mete with TPN MCB complete all as specified and directed by engineer in charge. |
| 181 | S&F sheet metal enclosure MCB DB 12 way, SPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed. Make : L&T / Legrand / Schneider or in equivalent as approved. |
| 182 | S&F MCB, SP (single pole ) 05 to 32 Amps, 10 kA, B curve for inductive load connected through cable lugs of suitable size complete all as specified and directed.Make : L&T / Legrand / Schneider or in equivalent as approved. |
| 183 | S&F MCB, SPN (single pole and neutral ) 40/63 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed.Make : L&T / Legrand / Schneider or in equivalent as approved. |
| 184 | S&F MCB, TPN (Triple pole Neutral) 63 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make : L&T / Legrand / Schneider or in equivalent as approved. |
| 185 | S&F sheet metal enclosure MCCB DB LOADLINE 4 way VTPN double door suitable for 415 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed. Make : L&T / Legrand / Schneider or in equivalent as approved. |
| 186 | S&F 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA connected through cable lugs of suitable size complete all as specified and directed. Make : L&T / Legrand / Schneider or in equivalent as approved. |
| 187 | S&F MCB, SP (single pole ) 63 Amps, 10 kA, B curve for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make : L&T / Legrand / Schneider or in equivalent as approved. |
| 188 | Taking down carefully sub main wiring of aluminium /copper any size including batten/ conduit complete etc and making good disturbed surfaces complete all as specified and directed. |
| 189 | M&L for sub main wiring with 2X6.0Sqmm+1X6.0Sqmm Earth Wire single core PVC insulated FRLS-H PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Casing capping as per site requirement and direction by EIC, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run PVC conduit/ casing shall be measured one unit length. |
| 190 | Supply and laying Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed. |
| 191 | S&F air termination, single pointed aluminium rod 12mm dia and 300mm long, complete all as specified and directed. |
| 192 | S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screw, complete all as specified and directed. |
| 193 | S&F Galvanized zinc metallic zinc coated Iron earthing electrode specialized developed for high sensitive equipment. Model SN001 (LXXVI MM ) as per Cpri 300 Cm long. Tested on 52.kA, C % 12 max, mn 0.60%mm class type GALV. Yield strength 329, tensile Strength 426, Elongation Bend/Flattering. Thickness Internal disposes' 2 inch x6mm with base plate 3.15 to close the earthing rod. Terminal 2 inch x6mm filled with highly conductive compound which increase the life of Earthing electrode. Composition of chemical filled in electrode water solubility . Grain size 100 mesh, along with SN make BFC compound non toxic, non reactive, non explosive and non corrosive, longer life Easytomaintain less space consistent results. Earthing pit and chamber cover complete all as specified as directed. Make SN ENGINEERING or in equivalent as approved |
| 194 | S&F in repair wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting, 6000K , 230 Volts, diffused optics ,etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed . |
| 195 | S&F in repair wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver,10 watt LED fitting, 6000K, 230 Volts, diffused optics, etc., complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed. |
| 196 | Taking down carefully 4/8 way SPN DB with MCB and removing materials to store for keeping in safe custody for refixing and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. |
| 197 | Fixing only MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 4/8 way 230 volts double door type regal gray horizontal type, totally enclosed, dust & vermin proof and concealed in wall complete all as specified and directed. Note :- MCB shall be measured and paid separately. |
| 198 | Fixing only MCB SP 6 to 32 Amps, 10 KA, 240 volt 'C' Series complete all as specified and directed. |
| 199 | Fixing only MCB SPN 32/40 Amps 10 KA, 240 volt 50 Hz 'C' Series complete all as specified and directed. |
| 200 | Taking down carefully 4 way TPN DB with MCB and removing materials to store for keeping in safe custody for refixing and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. |
| 201 | Fixing only MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting TPN 4 way, 415 volts, double door type regal gray horizontal type, totally enclosed, dust & vermin proof and concealed in wall complete all as specified and directed. Note :- MCB shall be measured and paid separately. |
| 202 | M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including 4 mm dia as earth lead wire by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate NO 5 of SSR Part- I (1991) and connecting to earthing test point, including CI cover, frame and PCC 1:3:6, type C-2, using 20mm graded crushed stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified and directed. Note :- i) PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner.ii) PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in lieu of CI) including taking out old unserviceable earthing any type. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender