Tender For Restoration /Preservation Of Ziyarat Sharief Hazrat Mirakshah Sahib Shalimar Srinagar.
Tender Value
96.96 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
1 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration /Preservation Of Ziyarat Sharief Hazrat Mirakshah Sahib Shalimar Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of 1 kilometer, as per direction of Engineer-in-charge. |
| 2 | Providing and filling of boulders as back filling (hand packing) including all leads, lifts, cost carriage etc from source upto site of work complete in all respects. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying chisel dressed Devri Stone of Size ranging from 1.5' x 2'-1'x8\\" face with average depth of 4-6 inch in cement mortar 1:6 ( 1 cement : 6 course sand) upto plinth level including curing. One gace dressed. |
| 5 | Rough chiseling of available devri stones incl moulding of corners as per the directions of EIC and all costs complete. |
| 6 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete,on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Dark shade using ordinary cement. |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm. |
| 8 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. |
| 9 | Supplying and laying of Nallah Dry stone soling hand packed tightly including ramming, watering and filling of interstices including all carriages complete. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for. excluding cost of GST. |
| 16 | a) Foundations, footings, bases of columns etc. for mass concrete. |
| 17 | b) Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | c) Suspended floors, roofs, landings, balconies and access platforms |
| 19 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand) including curing complete in: Above plinth level and upto floor V level. |
| 20 | Making sunken grooves between two bricks vertically and horizontally by using 10mm thick and 20mm deep wooden battens on the outer surface of brick walls upto floor v while laying brick work- complete job as per EIC |
| 21 | Ruled/ Flush pointing onBrick masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust INCLUDING SCAFOLDING. |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 23 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 24 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD Wood |
| 26 | Providing and fixing 30mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood. |
| 27 | Providing and fixing (35mm thick) panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. kail wood. |
| 28 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Float glass panes 3.5 mm thick. |
| 29 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm |
| 30 | P/F 12mm T&G wooden panelling in soffits & walls of approved brand and manufacture over budloo wood frame work inci varnishing and cost of necessary adhesive & nails etc incl cost of budloo frame work complete job. |
| 31 | Providing and fixing plained eaves boarding. 250x32 mm (nominal size ) 2nd class kail wood . |
| 32 | Providing and fixing hardware fittings of approved brand and of required type as approved by EIC complete as per the specification. |
| 33 | a) Tower bolts 100mm. |
| 34 | b) Tower bolts 150mm |
| 35 | c) Handles 100mm |
| 36 | d) Handles 125mm |
| 37 | e) Hinges 100x58x1.90mm. |
| 38 | f) 75x47x1.70mm Hinges |
| 39 | g) Al drop. |
| 40 | h) Hold Fast. |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 42 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm. |
| 43 | Providing and laying Stone-Textured Vitrified Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300x300 mm |
| 44 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 45 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 46 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work. |
| 48 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete KD wood. |
| 49 | Providing and fixing with High rib coloured profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters But Including cost of ridges/ valleys of plain colour coated sheets complete)and all carriages upto site of work.(0.5mm thick). |
| 50 | Providing and fixing of colour coated rain gutters 150mm wide 0.5mm thick incl fixing with M.S clips and all fittings and fixtures, all cost and carriages, scaffolding, making necessary connections with rain water pipes complete job. |
| 51 | Providing and fixing PVC rain water down pipes of specified diameter complete with bends, offsets, shoes, clamps, including jointing with solvent cement, fixing to wall with brackets, cutting holes and making good the walls etc. |
| 52 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-415 or Fe-500D or more as per requirement of structural Design Including carraige of material involved |
| 53 | Carriage of materials from source to site by mechanical transport including loading, unloading. |
| 54 | a) Stone aggregate for an avg. lead of 15Kms. |
| 55 | b) Sand for an avg. lead of 15 Kms. |
| 56 | c) Bricks for an avg. lead of 23 Kms |
| 57 | Sanitary items. |
| 58 | Providing and fixing PVC pipes prince make including necessary fittings bends, collars etc of standard quality. |
| 59 | a) 4 inch. |
| 60 | b) 3 inch |
| 61 | c) 4 inch bend. |
| 62 | d) 3 inch bend. |
| 63 | e) Bend of required degree 100mm |
| 64 | f) Bend of required degree 75mm. |
| 65 | g) PVC cowl pipe. |
| 66 | h) 4 inch floor trap. |
| 67 | i) T junction 75mm. |
| 68 | j) Electric fittings |
| 69 | k) 20mm PVC conduits I/C bend etc. |
| 70 | l) Deep junction for light points. |
| 71 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 72 | a) PN-16 pipe , 32mm OD(SDR-7.4) |
| 73 | b) PN-16 pipe , 25mm OD(SDR-7.4) |
| 74 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 75 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931. |
| 76 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 77 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 78 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour15 mm nominal bore with 45 cm length. |
| 79 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 80 | Providing and fixing of mirror. |
| 81 | Providing and fixing of soap case. |
| 82 | Providing and fixing 50 litre capacity of water heater geysers of Venus/ Jaquar / Racold or equivalent make including all fittings/ fixtures as required complete all inclusive; |
| 83 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Felxible pipe 40mm doa. |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 85 | Lighting point Five per point One Lighting point shall incl. wiring for lighting points in 1.5 Sq.mm PVC insulated Copper wire & 2.5 Sq.mm PVC insulated multi-strand Copper wire for lighting Sub-mains, 6 Amp one way switch, 2mm thick PVC conduit / Channel with bends, Junction boxes etc, 6 AmpS Pole MCB, 10 Amp D P MCB, 2 way D B for Housing MCB and Hylef Sheet with wooden box recessed in walls with accessories |
| 86 | Heating points One Heating point shall incl. wiring for heating points in 2.5 Sq.mm PVC insulated Multi-Strand Copper wire & 4 Sq.mm PVC insulated multi-strand Copper wire for heating Sub-mains, 16 Amp switch socket combined, 2mm thick PVC conduit / Channel with bends, Junction boxes etc, 10 AmpS Pole MCB, 2 way D B for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. |
| 87 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. |
| 88 | Supplying and laying of Nallah Dry stone soling hand packed tightly including ramming, watering and filling of interstices including all carriages complete. |
| 89 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 90 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 91 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 92 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 93 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 94 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 95 | a) Foundations, footings, bases for columns. |
| 96 | b) Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 97 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand) including curing complete in: Above plinth level and upto floor V level. |
| 98 | Making sunken grooves between two bricks vertically and horizontally by using 10mm thick and 20mm deep wooden battens on the outer surface of brick walls upto floor v while laying brick work- complete job as per EIC. |
| 99 | Ruled/ Flush pointing onBrick masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust INCLUDING SCAFOLDING. |
| 100 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 101 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 102 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 103 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD Wood |
| 104 | Providing and fixing 30mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood. |
| 105 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 2nd class kail wood |
| 106 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Float glass panes 3.5 mm thick |
| 107 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm. |
| 108 | P/F 12mm T&G wooden panelling in soffits & walls of approved brand and manufacture over budloo wood frame work inci varnishing and cost of necessary adhesive & nails etc incl cost of budloo frame work complete job. |
| 109 | Providing and fixing plained eaves boarding. 250x32 mm (nominal size ) 2nd class kail wood . |
| 110 | Providing and fixing hardware fittings of approved brand and of required type as approved by EIC complete as per the specification. |
| 111 | a) Tower bolts 100mm. |
| 112 | b) Tower bolts 150mm |
| 113 | c) Handles 100mm |
| 114 | d) Handles 125mm |
| 115 | e) Hinges 100x58x1.90mm. |
| 116 | f) 75x47x1.70mm hinges |
| 117 | g) Al drop. |
| 118 | h) Hold Fast. |
| 119 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 120 | Providing and laying Vitrified Anti skid tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorptionless than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based highpolymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including epoxy grouting of joints.11.54.2 Size of tile 600x600 mm |
| 121 | Providing and laying Stone-Textured Vitrified Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300x300 mm |
| 122 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 123 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 124 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 125 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work. |
| 126 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete KD wood. |
| 127 | Providing and fixing with High rib coloured profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters But Including cost of ridges/ valleys of plain colour coated sheets complete)and all carriages upto site of work.(0.5mm thick). |
| 128 | Providing and fixing of colour coated rain gutters 150mm wide 0.5mm thick incl fixing with M.S clips and all fittings and fixtures, all cost and carriages, scaffolding, making necessary connections with rain water pipes complete job. |
| 129 | Providing and fixing PVC rain water down pipes of specified diameter complete with bends, offsets, shoes, clamps, including jointing with solvent cement, fixing to wall with brackets, cutting holes and making good the walls etc. |
| 130 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-415 or Fe-500D or more as per requirement of structural Design Including carraige of material involved |
| 131 | Carriage of materials from source to site by mechanical transport including loading, unloading. |
| 132 | a) Stone aggregate for an avg. lead of 15Kms. |
| 133 | b) Sand for an avg. lead of 15 Kms. |
| 134 | c) Bricks for an avg. lead of 23 Kms |
| 135 | Sanitary items. |
| 136 | Providing and fixing PVC pipes prince make including necessary fittings bends, collars etc of standard quality. |
| 137 | a) 4 inch. |
| 138 | b) 3 inch |
| 139 | c) 4 inch bend. |
| 140 | d) 3 inch bend. |
| 141 | e) Bend of required degree 100mm |
| 142 | f) Bend of required degree 75mm. |
| 143 | g) PVC cowl pipe. |
| 144 | h) 4 inch floor trap. |
| 145 | i) T junction 75mm. |
| 146 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 147 | a) PN-16 pipe , 32mm OD(SDR-7.4) |
| 148 | b) PN-16 pipe , 25mm OD(SDR-7.4) |
| 149 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 150 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931. |
| 151 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 152 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 153 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour15 mm nominal bore with 45 cm length. |
| 154 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 155 | Providing and fixing of mirror. |
| 156 | Providing and fixing of soap case. |
| 157 | Providing and fixing 50 litre capacity of water heater geysers of Venus/ Jaquar / Racold or equivalent make including all fittings/ fixtures as required complete all inclusive; |
| 158 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Felxible pipe 40mm doa. |
| 159 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 160 | Lighting point Five per point One Lighting point shall incl. wiring for lighting points in 1.5 Sq.mm PVC insulated Copper wire & 2.5 Sq.mm PVC insulated multi-strand Copper wire for lighting Sub-mains, 6 Amp one way switch, 2mm thick PVC conduit / Channel with bends, Junction boxes etc, 6 AmpS Pole MCB, 10 Amp D P MCB, 2 way D B for Housing MCB and Hylef Sheet with wooden box recessed in walls with accessories |
| 161 | Heating points One Heating point shall incl. wiring for heating points in 2.5 Sq.mm PVC insulated Multi-Strand Copper wire & 4 Sq.mm PVC insulated multi-strand Copper wire for heating Sub-mains, 16 Amp switch socket combined, 2mm thick PVC conduit / Channel with bends, Junction boxes etc, 10 AmpS Pole MCB, 2 way D B for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. |
| 162 | Add GST by applying factor 0.18 on basic total Amount of items. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender