Tender For Special Repair Of Bldg No P-23 Of 5 Jat At Base C -Iii Under Ge 873 Ews
Tender Value
27.94 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
14 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No P-23 Of 5 Jat At Base C -Iii Under Ge 873 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness complete all specified and directed |
| 2 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick in Cement Mortar 1:4 for laying floor finishes. |
| 3 | Dismantling of tiles of any description or thickness in floors complete all as specified and as directed. |
| 4 | Material and labour for glazed ceramic coloured wall tiles of approved colour of size 350x 250x 7/ 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and as directed |
| 5 | M&L 20-25 mm thick machine cut Polished kota stone as in treads of staircase laying down and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over bedding layer of 20mm thick in CM 1:4 icluding screed bed complete all as specified and directed. |
| 6 | M&L 20-25 mm thick machine cut Polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over bedding layer of 10mm thick in CM 1:4 backing coat complete all as specified and directed. |
| 7 | M &L for mirrror polishing on old kota stone work where ever required to give high gloss finish complete all specd and directed. |
| 8 | M&L 40mm thick plain cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate) as in floor complete all as specified and as directed. |
| 9 | Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed. |
| 10 | M&L 15mm thick rendering on external wall of brick work or concrete surfaces in cement mortar 1:4 , is to finsihed the surfaces even and fair.(With water proffing compound) wpc measure separately |
| 11 | Supply only integral water proofing compound complete all specd and directed. |
| 12 | M&L, Rendering 10mm thick on fair faces of brick work finished even and smooth without using extra cement in CM 1:6, complete all as specifeid and directed by engr-in-charge. |
| 13 | M&L 5mm thick rendering on Ceiling of brick work or concrete surfaces in cement mortar 1:3 , is to finsihed the surfaces even and fair complete all specd and directed. |
| 14 | M&L, for prepartion of newly plastered wall surfaces of any description applying Two coat of cement base paint, over primer complete all as specifeid and direct complete all specd and directed. |
| 15 | M&L, for prepartion of Old plastered wall surfaces of any description applying Two coat of cement base paint, complete all as specifeid and direct |
| 16 | Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper and a coat of primer.complete all as specified and directed. |
| 17 | Material and labour for preparation of old plastered wall surface and applying two coats oil bound distemper and a coat of primer.complete all as specified and directed. |
| 18 | Material & labour for three coats of white wash on newly plastered surfaces as on ceiling including preparation of surface complete all as specified and directed. |
| 19 | Material & labour for two coats of white wash on old plastered surfaces as on ceiling including preparation of surface complete all as specified and directed. |
| 20 | M&L for painting to wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc complete all as specified and directed. |
| 21 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.(Steel/Wooden) complete all as specified and directed. |
| 22 | S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints. |
| 23 | S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. |
| 24 | S&F 2nd Class H.W Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows, ventilator stilles and rails provided as per SSR part -I clause 8.24 (b). complete all as specified and directed. |
| 25 | S & F butt hinges 100mm mild steel cold rolled, medium weight complete all specd and directed. |
| 26 | S & F butt hinges 75mm mild steel cold rolled, medium weight complete all specd and directed. |
| 27 | S & F of Extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and directed. |
| 28 | S & F of Extruded aluminium alloy handles fabricated type anodised 125 mm size complete all as specified and directed. |
| 29 | S&F 100mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specefied and as directed by the Engineer-in-charge. |
| 30 | S&F 150mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specefied and as directed by the Engineer-in-charge. |
| 31 | S & F in repair Curtain rail Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc and fixed, complete all as specified and directed. |
| 32 | S & F in repair cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 33 | Dismantling of water tanks 1000 litres capacity of any description and removing to store complete all as specified and directed. |
| 34 | Supply and Installed puff water tank capacity 1000 Ltrs insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature (-) 30 degree to (+) 35 degree celcius fixed in position with all fittings over PCC plate from complete all as specified. |
| 35 | S & F in repair 25 mm outer dia PP-R gate valve (brass insert) .complete all specified directed. |
| 36 | S &F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball ball screwed for iron pipe and fixed.(Minimum weight 25 mm -455gms)complete all specified and directed |
| 37 | Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from the site etc complete all as specified and directed |
| 38 | Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 12.5 mm graded crushed stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed. |
| 39 | M&L cement concrete type B-0, 1:2:4 mix (12.5 mm graded crushed stone agg) in padding, roof kerbs or mud stops. rounded or chamfered on edges and similar work all as specified and directed. |
| 40 | Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule complete all specd and directed. |
| 41 | M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete. |
| 42 | M&L for fixing APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) land on primered surface by torced application complete all specd and directed. |
| 43 | M & L for heat resisting paint on Surfaces of any description wood, steel, iron, concrete, brick, stone, etc.,exceeding 10cm in width or girth complete all specd and directed. |
| 44 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 45 | S &F in repairs stainless steel squatt pan/wc orissa pattern with integral foot rest (excluding flushing ciestern and flush pipe) incl P or S traps,set in incl concrete bedding etc as in repars incl making good complete all as spec and directed |
| 46 | S&F in repairs 10 ltr capacity PVC low level flushing ciestern incl 32 mm dia pvc flush pipe ,fixing in position complete all specd and directed. |
| 47 | M & L for PVC connection pipe of 15 mm x 450 mm long etc complete all specd and directed |
| 48 | S&F in repairs PVC waste pipes of 40/32 mm bore heavy duty thick type suitable for wash hand basin /sinks complete all specd and directed, |
| 49 | S&F 15mm bore chromium plated bib taps cast copper alloy, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete and fixed in repairs all as specified. |
| 50 | Supply and fixed in repairs 15mm bore stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all specd and directed. |
| 51 | Dismantling PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc and taking out of trenches, if required, complete all as specified and directed |
| 52 | S/F for PVC (SWR) pipes 110mm dia fixed to walls single socketed with rubber ring joints complete all as directed and as specified |
| 53 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floor of 75mm bore complete all as specified and directed. |
| 54 | S & F for PVC bend any radius size 75mm bore with access door complete all as specified. |
| 55 | M&L in repair PVC(SWR) multi floor trap plain with gratings including jointing to waste pipes with solvent cement size 75mm bore complete all as specified and directed. |
| 56 | Taking up or down 25 mm dia steel tubing and connections,including cleaning for refixing or removal to store omplete all as specified and directed. |
| 57 | S&F 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 25 mm outer dia complete all specd and directed. |
| 58 | M&L for 20mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4complete all as specified and directed. |
| 59 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete as specified and directed. |
| 60 | M&L for 100 mm thick PCC 1:4:8 type D2 (40mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engr-in-charge |
| 61 | M&L for providing cement cencrete types C-1 1:3:6 (20 mm agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 62 | M&L for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all specd and directed. |
| 63 | M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all specd and directed. |
| 64 | Deduct Schedule of Credit of listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender