Tender For Repairs / Renovation Of Old Temple Mata Bhuvnshori At Chandpora Harwan.
Tender Value
56.59 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
3 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs / Renovation Of Old Temple Mata Bhuvnshori At Chandpora Harwan.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge n cement mortar. |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 5 | P/L stone soling (Hand packed) in trenches incl. ramming, dressing, watering etc. incl. all leads, lifts and carriage upto site of work complete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 9 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars of grade. Fe-500D or more complete. |
| 10 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed. |
| 11 | Stone work, ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1Cement: 6 coarse sand) including pointing with white cement mortar 1:2 (1 White cement: 2 Stone Dust) with an admixture of pigment matching the stone shade and curing complete. White sand stone. |
| 12 | Extra for stone work ashlar sunk or moulded in cornice. |
| 13 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) (Flush /Ruled pointing) |
| 14 | Providing and fixing of Devri stone tiles 25mm thick in 1:4 mix including grouting the joints with grey pigment motor including cost and carriages of materials as per directions of EIC. |
| 15 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 16 | Providing and laying Ceramic Glazed floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown. |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick. |
| 19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 20 | Dismantling C.I. or asbestos rain water pipes with fittings and clamps including stacking the material within 50 meters lead : |
| 21 | a) 75 to 80 mm dia pipe. |
| 22 | b) 100 mm dia pipe. |
| 23 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm). |
| 24 | Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line- |
| 25 | Providing and fixing PVC piprs prince make including necessary fittings, bends, collars, etc of standard quality. |
| 26 | a) 100mm pipe. |
| 27 | b) 75mm pipe. |
| 28 | c) Floor traps 75mm. |
| 29 | d) Door bends 75mm. |
| 30 | e) Plain bend 75mm. |
| 31 | f) Coller 75mm. |
| 32 | g) Door bend 75mm. |
| 33 | h) Plain Bends 100mm. |
| 34 | i) Door bend 100mm. |
| 35 | j) Plain Tee 100mm. |
| 36 | k) Coller 100mm. |
| 37 | l) Reducer 100x75mm. |
| 38 | Providing and fixing of water heater geysers of Venus/ racold or equivalent make of 50 litre capacity including all fittings/ fixtures as required complete. |
| 39 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded. |
| 40 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 41 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 42 | Providing and fixing plained eaves boarding. 250x32 mm (nominal size ) |
| 43 | P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and put-up in position in budloo wood (including Frame work). of required size at required intervals including cost of necessary adhesive & cost of nails etc.complete job. incl touch wood polish and cost of nails / screws to be approved by Engineer-in-charge. |
| 44 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Paanch Murabah. |
| 45 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position: Budloo / Fir wood including cost of scaffolding cutting, making and placing in position complete job. |
| 46 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /stee frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately) 12mm thick commercial ply conforming to S : 1328 BWR type. |
| 47 | French spirit polishing, Two or more coats on new works including a coat of wood filler. |
| 48 | Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete Second class kail wood. |
| 49 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 50 | a) Foundations, footings, bases for columns etc. |
| 51 | b) Suspended floors, roofs, landings, balconies and access platforms. |
| 52 | Clearing of underground septic tank and soak pit by way of engangment of SMC suction pump vehicle including disposal of sludge away from site as directed incl all leads lifts men and machinery, carriages. |
| 53 | Engangment of skilled welder for Removal of MS Gate and refixing of same at desired position including welding where ever required as per directions of EIC incl carriages all leads lifts. |
| 54 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work. |
| 55 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand) including curing complete in: Above plinth level and upto floor V level. |
| 56 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 57 | Ruled Pointing with 1:2:1 (1 Non-Hydrated lime, 2: sand, 1: Surkhi) as per the Conservation & methodology procudure with all required materials) including Head load etc charges complete job. |
| 58 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 59 | Carriage of materials from source to site by mechanical transport including loading, unloading. |
| 60 | a) Stone aggregate below 40mm nominal size for an avg. lead pf 30 Kms. |
| 61 | b) Sand for an avg. lead of 25 Kms. |
| 62 | c) Stone for an avg. lead of 30 Kms. |
| 63 | d) Bricks for an avg.lead of 40 Kms. |
| 64 | Add GST by applying factor 0.18 on basic total Amount of items. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender