Tender For Development Of Panchayat Ghar At Panchayat Halqa Panzinara A
Tender Value
9.47 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
3 days left
EMD
18940
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Panchayat Ghar At Panchayat Halqa Panzinara A
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto1.5 m in -All kinds of soil. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 25 meter beyond 1 m from cutting edge.All kinds of soil.Gate Columns |
| 3 | P/L, watering and compacting with (8-10 tonne capacity power road roller) Khak Bajri with agg. size not exceeding 90mm granular sub-base material to specified lines, grades, cross-sections and density, finished work to be measured incl. carriage of materials by mech. Transport from source of supply up to site of work also includes all leads, lifts, loading, unloading and stacking charges complete. |
| 4 | Providing and laying of dry stone soling (hand packed) incl. carriage of same by MT 15 Kms.Gate Columns |
| 5 | P/Laying of Cast-in-Situ Cement Concrete of M7.5 Mix (1:4:8) using 40mm nom. size stone aggregate. |
| 6 | P/Laying of Cast-in-Situ Cement Concrete of M10 Mix (1:3:6) using 20mm nom. size stone aggregate .(Using Vibrator for compaction of concrete.) |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand). Incl Carriage. |
| 8 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.Qty.vide item 7 |
| 9 | P/Laying of Cast-in-Situ Cement Concrete of M15 Mix (1:2:4) using 20mm nom. size stone aggregate. |
| 10 | P/fixing of steel reinforcement inc cutting,bending and placing in position (complete job).Qty vide 7 @ 1Qtl/cum |
| 11 | P/Fixing of formwork including removal of same. |
| 12 | 12 mm thick plaster in 1:4 mix inc curing. |
| 13 | Providing and fixing with necessary screws/nuts & bolts/ nails and fixed on wooden frame work, complete as per direction of Engineer-in-charge . 9mm thick ply. ( Including cost of all material , leads , lifts , and carriage etc. up to site of work complete.) |
| 14 | Providing and fixing of 12mm thick wooden panelling including frame work, cost of nails etc, complete job.Qty.vide item 6 |
| 15 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required .Kitchen sink without drain board .610x460mm bowl depth 200mm |
| 16 | Providing and fixing of geysers of Approved make. 35 liter capacity. |
| 17 | Providing / laying PPR pipe including fitting / fixtures of approved brand (B class) .25mm |
| 18 | b)Union |
| 19 | Providing and fixing of CP fittings of approved Make(as per the directions of Engineer incharge)Sink Mixer |
| 20 | Angle value |
| 21 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour or shade.16mm |
| 22 | Varnishing with varnish of approved brand and manufacture:Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. Two or more coats of glue sizing with spar varnish on an under coat of flatting varnish.Qty.vide item 14 |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.Size of tile 600x600 mm. |
| 24 | Providing and fixing of PVC pipes incl. bend ,Tee,floor trap etc complete job Floor Trap |
| 25 | PVC Pipe 3\\" |
| 26 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 27 | P/fixing of steel in built up sections in angles and flats including one coat of red oxide Two coats of paint of approved brand and shade(complete job)Gate @ 4 Kg/sft |
| 28 | Providing and fixing of Iron Hold Fast. |
| 29 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete,on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand). |
| 30 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, |
| 31 | Bolster |
| 32 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of stone soling 40mm nominal size well rammed and consolidated and grouted with fine sand including |
| 33 | Providing and fixing 0.50 H.P. water Motor/ Pump of standard make complete job incl power supply. |
| 34 | Add provision for cost of signboard photographs and other unforseen items etc (STA) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender