Tender For Repair / Maintenance Of Various Wooden And Steel Furniture At Af Stn Samana Under Ge (Af) Jamnagar No.2
Tender Value
20 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
18 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair / Maintenance Of Various Wooden And Steel Furniture At Af Stn Samana Under Ge (Af) Jamnagar No.2-- 1 Removing Following Old And Unserviceable Parts / Components Of “Bed Hard Ply Top” And S&F New Parts / Components Of Same Size, Existing Pattern And Same Material Of Same Texture, With Necessary Beading, Screw, Etc All As Shown On Drawing & As Directed By Engineer-In-Charge. (Drg No Fd 246, 247) 2 Head Rest Complete Of Size And Specification As Per Drawing. 3 Foot Rest Complete Of Size And Specification As Per Drawing. 4 Plywood Top 12 Mm Thick Bwr Commercial . 5 Long Rail Of First Class Hard Wood (Teak Wood) Of Size And Specification As Per Drawing. 6 Short Rail Of First Class Hard Wood (Teak Wood) Of Size And Specification As Per Drawing. 7 Both Side Veneered Of Head Rest Of Size And Specification As Per Drawing. 8 Both Side Veneered Of Foot Rest Of Size And Specification As Per Drawing. 9 Removing Following Old And Unserviceable Parts / Components Of “Chair Dining With Cushioned ” And S&F New Parts / Components Of Same Size, Existing Pattern And Same Material Of Same Texture, With Necessary Beading, Screw Etc All As Shown On Drawing & As Directed By Engineer-In-Charge. (Drg No Fd/Map-Ii/04,Fd/Map-Ii/05). 10 Front Leg Made Out Of Teakwood Of Size And Specification As Per Drawing. 11 Rear Leg Made Out Of Teakwood Of Size And Specification As Per Drawing.
BOQ
| Sl. No. | Item Description |
| 1 | Removing following old and unserviceable parts / components of “BED HARD PLY TOP” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 246, 247) |
| 2 | Head rest complete of size and specification as per drawing. |
| 3 | Foot rest complete of size and specification as per drawing. |
| 4 | Plywood top 12 mm thick BWR commercial . |
| 5 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 6 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 7 | Both side veneered of Head Rest of size and specification as per drawing. |
| 8 | Both side veneered of Foot Rest of size and specification as per drawing. |
| 9 | Removing following old and unserviceable parts / components of “CHAIR DINING with cushioned ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/04,FD/MAP-II/05). |
| 10 | Front leg made out of teakwood of size and specification as per drawing. |
| 11 | Rear leg made out of teakwood of size and specification as per drawing. |
| 12 | Bottom stiffener long first class hard wood (teak wood) of size and specification as per drawing. |
| 13 | Bottom stiffener short first class hard wood (teak wood) of size and specification as per drawing. |
| 14 | Seat/Back from members front, back side for chair as per drawing |
| 15 | Horizontal back stiffner first class hard wood (teak wood) of size and specification as per drawing. |
| 16 | Complete seat made out of 75 mm thick 32 density foam with 6 mm thick plywood base, upholstered with tapestry as directed by Engineer-in-charge. |
| 17 | Removing following old and unserviceable parts / components of “CHAIR EASY” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229) |
| 18 | Front / Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 19 | Arm rest made of first class hard wood (teak wood) of size and specification as per drawing. |
| 20 | Seat Front / Rear / side rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 21 | Back Upper / bottom rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 22 | Removing following old and unserviceable parts / components of “CHAIR DINING FD ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge.(Drg No FD-279) |
| 23 | Front legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 24 | Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 25 | long / short rail of seat made of first class hard wood (teak wood) of size and specification as per drawing. |
| 26 | Stiffener of back made of first class hard wood (teak wood) of size and specification as per drawing. |
| 27 | Short & long stiffener of bottom made of first class hard wood (teak wood) of size and specification as per drawing. |
| 28 | Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285) |
| 29 | Front legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 30 | Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 31 | Front / Rear / Side rail of seat made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 32 | Stiffener of Back made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 33 | Short / long stiffener of bottom made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 34 | Arm rest made of first class hard wood (teak wood) of size and specification as per drawing. |
| 35 | M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge. |
| 36 | Removing following old and unserviceable parts / components of “PEG TABLE” and S&F new parts / components of same size, existing pattern with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-236 & 277) |
| 37 | Removing old u/s tops from peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 38 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 39 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 40 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 41 | Bottom stiffner long and short of first class hard wood (teak wood) of size and specification as per drawing. |
| 42 | Removing following old and unserviceable parts / components of “REPAIRS TO HAT STAND WITH MIRROR” and S & F new parts / components of same size, existing pattern and same material, with beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233) |
| 43 | 5 mm thick looking mirror of size and specification as per drawing. |
| 44 | 3 mm thick Veneered plywood of size and specification as per drawing. |
| 45 | 9 mm thick Back Plywood of size and specification as per drawing. |
| 46 | Aluminium Peg of size and specification as per drawing. |
| 47 | Removing following old and unserviceable parts / components of “SOFA 1 & 3 SEATER” and S & F new parts / components of same size, existing pattern and same material, with beading, screw,etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373) |
| 48 | Arms made out of teakwood of size and specification as per drawing. |
| 49 | Front leg made out of teakwood of size and specification as per drawing. |
| 50 | Rear leg made out of teakwood of size and specification as per drawing. |
| 51 | Batten for seat and back made out of teak wood of size and specification as per drawing. |
| 52 | Long rail for 3 seater made out of teakwood of size and specification as per drawing. |
| 53 | Long rail for 1 seater made out of teakwood of size and specification as per drawing. |
| 54 | Short rail made out of teakwood of size and specification as per drawing. |
| 55 | M&L for replacement of old u/s seat/back cushions, S&F new foam cushion of size 21''x20''x100mm thick, 40 density (Make: Sleepwell/kurlon) all as specified and directed. |
| 56 | M&L for replacement of old u/s tapestry cloth of seat/back cushion, S&F new tapestry cloth of approved quality/colou/texture (Cost of tapestry shall not be less than Rs.260/- per metre) all as specified and directed. |
| 57 | Removing following old and unserviceable parts / components of “TABLE CENTRE” and S & F new parts / components of same size, existing pattern , same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-235 & 274) |
| 58 | Removing old u/s tops from Table centre and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 59 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 60 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 61 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 62 | Short stiffner at bottom of first class hard wood (teak wood) of size and specification as per drawing. |
| 63 | Removing following old and unserviceable parts / components of “TABLE DINING 4 PERSON 1200mm x 900mm ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. Drg No FD/E6/MAP/03,FD-239 & 273) |
| 64 | Removing old u/s tops from Table dining and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 65 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 66 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 67 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 68 | Removing following old and unserviceable parts / components of “TABLE DINING 6 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03,FD-239 & 273) |
| 69 | Removing old u/s tops from Table dining and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 70 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 71 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 72 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 73 | Removing following old and unserviceable parts / components of “TABLE DINING 8 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-30,239,273,376) |
| 74 | Removing old u/s tops from Table dining and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 75 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 76 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 77 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 78 | Removing following old and unserviceable parts / components of “TEAPOY WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278) |
| 79 | Removing old u/s tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 80 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 81 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 82 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 83 | Short stiffner at bottom of first class hard wood (teak wood) of size and specification as per drawing. |
| 84 | Removing following old and unserviceable parts / components of “TABLE DRESSING GENTS WITH MIRROR FD ” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-230,379) |
| 85 | 5 mm thick Looking Mirror with complete frame of hard wood for mirror and specification as per drawing. |
| 86 | 06mm thick ply wood at the back with completer frame of first class hard wood (teak wood) of size and specification as per drawing. |
| 87 | 12mm thick pre-laminated particle board top & bottom all as per drg |
| 88 | 12mm thick pre-laminated particle board for side all as per drg |
| 89 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 90 | Knob 40mm dia as per drg |
| 91 | Removing following old and unserviceable parts / components of “Table DRESSING LADIES FD” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 251,378) |
| 92 | 5mm thick Looking Mirror with complete frame of hard wood for mirror and specification as per drawing. |
| 93 | 06mm thick ply wood at the back with completer frame of first class hard wood (teak wood) of size and specification as per drawing. |
| 94 | 18mm thick pre-laminated particle board top & bottom all as per drawing |
| 95 | 18mm thick pre-laminated particle board for side all as per drg |
| 96 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 97 | Knob 40mm dia as per drg |
| 98 | Aluminium channel for glass as per drg |
| 99 | Plain glass as per size and drg |
| 100 | Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283) |
| 101 | Removing of old u/s top of table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 102 | Leg made of first class hard wood (teak wood) of size and specification as per drawing. |
| 103 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 104 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 105 | Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 106 | Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 107 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 108 | Knob 40mm dia as per drg |
| 109 | Removing following old and unserviceable parts / components of “TABLE 3' x 3' WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-88 M, 291) |
| 110 | Removing of old u/s top of table 3 x 3 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 111 | Leg made of first class hard wood (teak wood) of size and specification as per drawing. |
| 112 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 113 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 114 | Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 115 | Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 116 | Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-33 & 275, 249) |
| 117 | Top made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 118 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 119 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 120 | Shutters made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. |
| 121 | Removing following old and unserviceable parts / components of “ SIDE BOARD” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-26 (M) / 371) |
| 122 | Back made out of 4 mm thick plywood. |
| 123 | Removing old u/s door from Side board and S&F new door made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 124 | Top with 18mm Particle board with PVC beadding |
| 125 | Drawer made all as per existing drg. |
| 126 | Side Ply as per existing drg |
| 127 | Bottom of side board as per existing drg |
| 128 | 100 mm size Aluminium hasp & staple. |
| 129 | Knob 40mm dia |
| 130 | Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 276 ) |
| 131 | Back of 6 mm thick commercial face plywood. |
| 132 | side (right & left) made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) all as specified in drg as directed by Engr-in-charge. |
| 133 | Top / middle shelf all as per items ser No 20.02 |
| 134 | S & F wooden bracket made of first class hard wood (Teak wood) for all type of wooden furniture fixed with 2 Nos screw and duly polishing to match with existing complete as direction by Engr-in-charg. |
| 135 | S & F of PVC shoe/Ring for all type of wooden furniture fixed with suitable screws as direction by Engr-in-charg. |
| 136 | M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish as directed by Engr-in-Charge :- |
| 137 | Bed plywood (FD-246 & 247) |
| 138 | Chair dining (FD- 279 & FD/MAP-II/05) |
| 139 | Chair Dining (FD/MAP-II/04) |
| 140 | Chair dining long back (FD-357 ) |
| 141 | Chair easy (FD-229) |
| 142 | Chair writing (FD 250 & 280) |
| 143 | Hat stand with mirror (FD-233 & 362) |
| 144 | Peg table (FD- 236 & 277) |
| 145 | Sofa set single seater (FD-281,TP) |
| 146 | Sofa set 3 seater (FD-258, 281, 373& TP) |
| 147 | Table dining for 4 persons (Drg No - FD 139 (M), 289) |
| 148 | Table dining for 6 persons (Drg No - FD 239, 273) |
| 149 | Table dining for 8 persons (Drg No - FD 239, 273) |
| 150 | Table writing (Drg No - FD 249,275) |
| 151 | Table centre (Drg No - FD-274) |
| 152 | Table dressing gents with mirror (Drg No - FD 238, FD/E6/MAP/16) |
| 153 | Table dressing ladies with mirror (Drg No - FD 378,251 FD/MAP-II/07 ) |
| 154 | Teapoy (Drg No - FD-232,278) |
| 155 | Table 900 x 600 x 760 w/o drawer (Drg No - FD 223,224,283) |
| 156 | Table 900x600x760mm with drawer (Drg No - FD 223,224,283) |
| 157 | Table 900 x 900 (Drg No FD-291) |
| 158 | Side Board (Drg No FD-26 (M) / 371) |
| 159 | Table bed side |
| 160 | Removing old and unserviceable parts / components of “ALMIRAH LARGE / MED / SMALL STEEL ”and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1031 & 1032) |
| 161 | MS lock 6 levers best quality with brass livers & duplicate key (Make:- Harrison/Samrat or equivalent as approved by the GE) |
| 162 | Mild steel chromium plated handle 125 mm size . Make : link/MK/Man |
| 163 | Three way locking assembly with iron plate and two rods 10 mm dia and lock cover as per drawing. |
| 164 | Leg made out of 1.00 mm thick mild steel plane black sheet size as per drawing including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine. |
| 165 | M & L for Removing old unserviceable Shelves from Almirah Large/Med/Small Steel and S & F shelves of approved quality of existing size fixed with screw/welding to shutter of almirah all as specified and directed by Engr-in-charge. As shown in drg |
| 166 | M & L for Removing the existing dented shelves from Almirah Large/Med/Small Steel and bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-charge. all as shown in drg. |
| 167 | M & L for Removing old unserviceable Hanging rod from Almirah Large/Med/Small Steel and supply and fix new hanging rod of approved quality all as specified and directed by Engr-in-charge. all as shown in drg |
| 168 | M & L for Removing old unserviceable door shutter from Almirah large steel and supply and fix door shutter necessary fittings of approved quality all as specified and directed by Engr-in Charge all as shown in drg. |
| 169 | M & L for Removing old unserviceable door shutter from Almirah Smal/lMed steel and supply and fix door shutter necessary fittings of approved quality all as specified and directed by Engr-in Charge all as shown in drg. |
| 170 | Removing the existing U/S plywood from BED IP STEEL HARDTOP & supply and fix 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ Map / 08 (R) |
| 171 | Removing the existing U/S pre-laminted partical board from head rest of Bed Hard Steel, and S & F 18/19 mm pre laminated patical board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP/08 (R)) |
| 172 | Removing the existing U/S pre-laminted partical board from foot rest of Bed Hard Steel, and S & F 18/19 mm pre- laminated patical board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP / 08 (R)) |
| 173 | Removing old unserviceable long rails and S&F new long rails of Bed Hard size 1974x65x25mm rectangular MS pipe 18 guage using gas welding and standard wormanship complete as directed by Engrs-in-charge |
| 174 | Removing old unserviceable stiffners and S&F new stiffner rails of Bed Hard size 850x25x25mm rectangular MS pipe 18 guage using gas welding and standard wormanship complete as directed by Engrs-in-charge |
| 175 | Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings. |
| 176 | Removing following old and unserviceable parts / components of “TEAPOY VARANDAH” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-255) |
| 177 | Removing old u/s tops from teapoy verandah and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 178 | Leg fabricated with 20 mm dia mild steel conduit pipe of wall thickness 1.6 mm including bending in 'U' shape. |
| 179 | Removing of existing unsv rubber shoe and S & F with new rubber shoe as shown in drg. |
| 180 | Top frame Long Rail as shown in drg |
| 181 | Top frame short Rail as shown in drg |
| 182 | Material & Labour for removing of unserviceable Charpoy GI Pipe nylon newar to charpoy GI pipe with Plywood top, tightening of all loose components of complete charpoy such as check nuts, elbows, long rails, short rails, legs, etc and supply and fixing 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 920 mm in single piece fixed on top of Charpoy GI pipe with & including supplying and fixing two Nos stiffeners made out of mild steel flat iron 35mmx5mm, 880mm long between long rails parallel to short rails with equal spacing and power welding duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer, plywood top fixed with and including mild steel galvanized iron nuts & bolts of size 70mm long x 6mm dia (Nos of bolts to be provided - 12 Nos) with GI washers of suitable size (Heavy weight) in sufficient numbers on top of bolts to maintain the plywood top in true leveled position and one GI washer on underside of each bolt for proper tightening of bolt, embossing word \\"MES” with height of letters 10cm on four corners of the plywood top with thick black synthetic enamel paint, complete all as specified, shown on drawings and as directed. Notes :- (i) The above mentioned size of plywood is firm and no tolerance in size, thickness etc shall be accepted. (ii) Plywood shall be provided in single piece in each Charpoy. (iii) Electric arc welding shall be used to fix stiffeners. (iv) Welding rod shall be ISI marked. (v) Purchase voucher of plywood shall be obtained by the contractor from authorised dealer/manufacturer and shall be submitted to Engineer-in-Charge. Drg No;-FD-220 |
| 183 | Material & Labour for removing of unserviceable long rail of Charpoy GI pipe and supply and fixing new long rail made out of GI tubing 32 mm bore, medium grade, ISI Marked, 1980mm long, duly continuous threaded properly at both ends as per best trade practice, complete all as specified, shown on drawings and as directed. Notes :- (i) threading of new rail shall be as per best trade practice as approved by GE. (ii) Unit for measurement of this item is ‘Each’Job which shall comprise of removing of one old long rail and supply and fixing of one new long rail in lieu. |
| 184 | Dismantling carefully unserviceable short rail of Charpoy GI pipe and replacement by short rail made out from old long rail GI pipe retrieved under serial item No. 1.01 here-in-before, duly continuous threaded properly at both ends as per best trade practice complete all as specified, shown on drawings and as directed. Notes :- (i) threading of new rail shall be as per best trade practice as approved by GE. (ii) Unit for measurement of this item is ‘Each’ which shall comprise of removing of one old short rail and fixing of one short rail in lieu made out of old long rail. (iii) The rate quoted for this item shall include for making of short rail by cutting from old long rail in appropriate size. |
| 185 | Dismantling carefully uncerviceable leg of Charpoy GI pipe and replacement by leg made out of from old short rail GI pipe retreived under serial item No.1.02 here-in-beore duly continious threaded property at one end as per best trade practice & including supply & fixing mild steel 5mm thick & 35mm dia plate to the bottom leg duly continous threaded as per best trade practice complete all as specified shown or drawing as directed. Notes : - (i) Threading of leg shell be as per best trade practice as approved by GE (ii) Unit for measurement of this item in each job which shall comprise of removing of one old leg and fixing of one leg in lieu made out of short rail (iii) The rate quoted for this item shall include for making of leg by cutting from old short rail approprite size. |
| 186 | Supply & fixing in position GI 3 way elbow 32mm bore, medium grade (‘B’ Class), ISI marked in Charpoy GI pipe including dismantling & taking out carefully old unserviceable GI 3 way elbow 32mm bore complete all as specified, shown on drawings and as directed. Drg NO.FD-220 |
| 187 | Supply & fixing in position GI check nut 6mm thick 32mm bore, medium grade (‘B’ Class), ISI marked in Charpoy GI pipe including dismantling & taking out carefully old unserviceable GI check nut complete all as specified, shown on drawings and as directed. Drg No. FD-220 |
| 188 | Material & labour for electric welding of Stiffener GI tubing by continuous welding around the broken joint duly painted with aluminium paint on welded portion complete all as specified & as directed. Notes :- (i) Unit for measurement of this item is ‘Each’ which shall comprise of welding of each broken joint all as specified above. (ii) Welding rods shall be ISI marked (iii) This item shall not be paid for serial item No. 1.00 to 1.06 here-in-before. DRg NO.FD-220 |
| 189 | M&L for re-canning of \\"CHAIR VERANDAH\\" using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint all as specified and shown in Drg and as directed by Engr-in-Charge. (Drg No FD - 256) |
| 190 | Supply and fix in repair hard rubber shoe to chair verandah / chair verandah steel. |
| 191 | Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1004) |
| 192 | Removing old u/s tops from table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 193 | Removing of unserviceable/broken/Damaged/Rusted drawers from existing table office clk steel for repair drawers include tinkering/denting, welding etc. |
| 194 | M&L for removal of existing unserviceable lock of any description in any position, S& F new lock (brass) 6levers (Make:Voltas/Bajarang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed by Engineer-in-charge. |
| 195 | Removing of Existing unserviceable handle and S & F with new handle as shown in drg. |
| 196 | Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings. |
| 197 | Removing following old and unserviceable parts / components of “TABLE OFFICE OFFICER STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1003) |
| 198 | All as per item No 30.01 above but top of Table Office Offr steel |
| 199 | All as per item No 30.02 above but drawers of Table Office Offr steel |
| 200 | All as per item No 30.03 above but lock of Table Office Offr steel |
| 201 | All as per item No 30.04 above but handle of Table Office Offr steel |
| 202 | All as per item No 30.05 above but Rubber shoe of Table Office Offr steel |
| 203 | Removing following old and unserviceable parts / components of “VARIOUS TYPES OF CHAIR REVOLVING” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -TP/ Godrej/Durian/HOF & etc ) |
| 204 | Removing the existing old foam with tapestry of seat and S &F new 40 density foam cushion 75 mm with tapestry as approved By GE . |
| 205 | All as per item No 32.01 above but Back of chair revolving. |
| 206 | All as per item No 32.01 above but Arm of chair revolving. |
| 207 | Removing the existing U/S casteor wheel and S&F new caster wheel. |
| 208 | Replacement of lever system (hydraulic) for adjustment of height including all necessary fitting etc. |
| 209 | Replacement of complete plate base stand assembly including all necessary fitting etc. |
| 210 | Replacement of Chair Base with 5 wheel as per drg |
| 211 | Replacement of Tapestry cloth of seat as per drg |
| 212 | Replacement of Tapestry cloth of back as per drg |
| 213 | Removing following old and unserviceable parts / components of “RACK SHOE STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/ 02/R) |
| 214 | Creedal (selves) made of 25 mm conduit pipe & 3 mm MS wire mesh |
| 215 | Removing following old and unserviceable parts / components of “TABLE COMPUTER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03) |
| 216 | Removing old u/s tops from Table computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 217 | Drawer made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge. |
| 218 | Removing old u/s vertical of Table computer and S&F (650 x150) with 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 219 | Removing U/S telescopic channel and S & F new telescopic channels for mouse and keyboard trayas per drg all as specified in drg as directed by Engr-in-charge |
| 220 | Removing U/S Pull out tray inculding telescopic channel and S & F new pull out tray with telescopic channels as per drg all as specified in drg as directed by Engr-in-charge |
| 221 | Removing U/S Key Board tray inculding telescopic channel and S & F new key Board tray with telescopic channels as per drg all as specified in drg as directed by Engr-in-charge |
| 222 | Removing U/S Drawer Handle and S & F new drawer Handle as per drg all as specified in drg as directed by Engr-in-charge |
| 223 | Repairs of BOOK CASE STEEL( FD/69,1018 FD-45/FD/235) |
| 224 | M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth all as specified and as directed by Engr-in-Charge. |
| 225 | M & L for removing old unserviceable locks from book case steel and S & F new 4 layer brass lock of 50mm with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of book case steel all as specified and directed by Engr-in-Charge. |
| 226 | M & L for removing old unserviceable broken CP handles 100mm from Book case steel and supply and fix new Godrej pattern handle with necessary fittings of approved quality all as specified and directed by Engr-in-Charge. |
| 227 | M & L for removing the existing unserviceable legs from book case steel and supply and fixing the new legs made out of 1mm thick CRCA sheet and fixed with welding/riveting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint of olive green shade over a coat of redoxide primer all as specified and as directed by Engr-in-Charge. |
| 228 | M & L for removing the existing dented shelves from book case steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and as specified abd directed by Engr-in-Charge. |
| 229 | M & L for removing the unserviceable/rusted bottom from book case steel and supply and fix new bottom nade out of 1mm thiick CRCA sheet made to shade and size on drawing and fixing by welding matching with existing book case and one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-Charge. |
| 230 | Removing of old unserviceable Glass pane and S & F new front glass of each compartment 3mm thick glass pane to thr front shelves of each compartment of book case steel all as shown on drg and as directed by Engineer-in-Charge. |
| 231 | Removing following old and unserviceable parts / components of “CHAIR SCHOOL WITH HAND BOARD” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6 / MAP / 05) |
| 232 | S & F in repair PVC Seat & back one piece of chair school with hard baord. (Drg No.FD/ E6/ MAP/ 05)Make:- Blowplast / Supreme / Cello / National, Amko) |
| 233 | Removing old u/s tops from chair school hand board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 234 | Hard rubber shoe. |
| 235 | Removing old and unserviceable parts / components of “ CHAIR TUBULAR OFFICE STEEL WITH / WITHOUT ARMS” and S&F new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-75 ) |
| 236 | Second class HW seat frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete. |
| 237 | Second class HW back frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete.. |
| 238 | Second class HW hand rest including black enamel painting. |
| 239 | Rubber shoe with suitable screws. |
| 240 | Removing following old and unserviceable parts / components of “TABLE 900 x 600 x 760mm with & without drawer” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1007,1008) |
| 241 | Removing old u/s tops from Table TABLE 900 x 600 x 760mm with drawer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 242 | Removing U/S leg/short rail and S&F of new leg/short as per existing drg. |
| 243 | Drawer as per drg |
| 244 | Handle as per drg |
| 245 | Rubber shoe with suitable screws. |
| 246 | Removing following old and unserviceable parts / components of “Table Printing and Fax ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/ E6/ MAP/06) |
| 247 | Removing old u/s tops from Table Printing & Fax and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 248 | Removing the existing both U/S Drawer and supply and fixing new Drawer of same size and shape as per drawing and providing 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge. |
| 249 | Removing the existing U/S box and supply and fixing new box of same size and shape as per drawing of best quality as approved by Engr-In-Charge. |
| 250 | Removing the existing U/S leg and S & F new legs 25 mm thick square MS pipe of same size and shape |
| 251 | Removing the existing U/S plywood from CHARPOY IP FOLDING & supply and fix 9 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. |
| 252 | Material & Labour for removing of unserviceable Folding rail of Charpoy IP folding and fixing new folding rail of same size, existing pattern using gas welding and standard workmanship complete as directed by Engrs-in-charge, ISI Marked, as per best trade practice, complete all as specified, shown on drawings and as directed. |
| 253 | M&L for spot Welding of steel items of broken joints etc not exceeding 2.5 cm in length and thickness of weld 6 mm, including scraping preparing surface of welded portion by grinding and buffing to match with existing. |
| 254 | M & L for Preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying of putty wherever necessary, and Painting with one coat of synthetic enamel paint with spray gun as per existing colour and all as specified and directed by Engr-In-Charge. |
| 255 | Almirah med steel (Drg No - FD 243 /1032) |
| 256 | Almirah large steel (Drg No - FD 67/1031) |
| 257 | Book Shelf Open Small Steel (Drg No - FD-69 M) |
| 258 | Rack 6 tier steel (Drg No - FD-1038) |
| 259 | Rack Shoe Steel (Drg No - FD E6 MAP 02) |
| 260 | Table office officers steel (Drg No - FD 84 M,1003) |
| 261 | Table office clerk steel (Drg No - FD 84 M,1004) |
| 262 | Table with drawer steel frame 900 x 600 x 760 mm (Drg No - FD 1008) |
| 263 | Table 900 x 900 x 760 Steel (Drg No - FD-1007,1009) |
| 264 | Teapoy verandah (Drg No - FD 35 / 255 / 383) |
| 265 | Bed hard steel (Drg No - FD / E6 / MAP / 8 (R)) |
| 266 | Chair School Hand Board (Drg No FD / E6 / MAP / 05) |
| 267 | Chair varandah Steel (FD- 256) |
| 268 | Table computer (Drg No FD-1009,FD/E6/MAP/03) |
| 269 | Chair CB steel with Arms (Drg No FD-75) |
| 270 | Chair varandah MAP (Drg No: FD/E6/MAP/II) |
| 271 | Rack steel of size 1905 x 1830 x 760mm (Drg No FD-129) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender