Tender For Aupgradation Of Lane And Drain And Other Allied Works At Various Locationsin Ward No5bconstruction Of Entry Gate At Lakhdata Bazar Ward No5. (Capex 2026-27)
Tender Value
50 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
14 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Aupgradation Of Lane And Drain And Other Allied Works At Various Locationsin Ward No5bconstruction Of Entry Gate At Lakhdata Bazar Ward No5. (Capex 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected:All kinds of soil : |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for:Columns, pillars, piers, abutments, posts and struts. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All works upto plinth level |
| 9 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All works above plinth level upto floor V level |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 12 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 13 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured).Suspended floors, roofs, landings, beams and balconies (plan area to be measured |
| 14 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 15 | Extra for plastering done on moulding cornices or architraves including neat finish to line and level : In one coat |
| 16 | Extra for plastering groined ceiling |
| 17 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 18 | Providing and fixing machine cut, mirror / egg shell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. All complete as per Architectural drawings, and as directed by the Engineer- in-Charge. a. 18 mm thick Italian Marble stone slab, Perlato, Rosso Verona, Fire Red or Dark Emperadore etc |
| 19 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work |
| 20 | Supply, Installation, Testing and Commissioning of outdoor type flood light of 150 Watt or more of color and make as approved by the Engineer-in-charge with necessary connections and tuning. The lights are to be enclosed in MS enclosures lixed to PCC base (PCC base to be pald separately) by means of suitable fasteners (Nuts & Bolts) as approved by the Engineer-in-charge. The cost also Includes necessary connections to an automated Items Included panel (To be pald separately) all Items (Complate Job) as approved by the Engineer-in-Charge.(LMR) |
| 21 | Supply, Installation, Testing and Commissioning of Main Switch Cum-Padestal cum- Distribution board. Time light distribution board 65 Amp 3 pole/ 230 Volts, with digital time switch having suitable size of 2 no. 63 bmp ТРИ МСВ, 2 по. 65 amp contactor. Astronomical Type, 1 HRC (use, 1 No. Rotray Switch, 1 No. 16 amp fuse base, 1 No. Timer switch and 1 Indicator having IP 52/56 Degree protection all Items should be of same make/manufacturer Including padestal, Including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-In Charge of the work. (Reputed Make) (LMR) |
| 22 | Providing, fixing and Installing of 18W LED Strip Light Upto 5 Meter roll, from systém 2700X colour temperature, maximum system wattage of 18W, useful life of 50000 Hrs (Complete LM 80 test report for LED should be submitted), Isolated type, mültistago Constant Current Constant Voltage topology driver suitable to operate in Input voltage range of 150V to 270V (nominal rated voltage 240V) with minimum 2KV surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less that 10% should be Integral to the luminaire complete with all accessories required with lamps.Philips/ Wipro/ Tisva. The rate quoted in for Inclusive of wiring of 2x1.5 sqmm, inodular switch, modular plate, modular box etc all complete fittings for switching on and off of the fixture. Each fixtures to be controlled by 1 no. 5 amp. Switch (LMR) |
| 23 | Providing and fixing Backlit Sign Board as per approved design and concept. The Signboard shall be made with 4-6 mm thick exterior grade acrylic backing screwed to tha surface with self tapping screws. The backing shall be provided with height adjustable steel suspenders with baight adjustment by screw rotation as approved by the Engineer-in-Charge and also have provision for receiving wiring and recess for LED lighting. The Writing whatever epproved shall be printed on top of the front cover in colors as approved, by the Engineer-In-Charge: with exterior grade ACP Letters embossed to a minimum thickness of 20mm. The entire assembly shall be of mlálmum size2000 x 600 mm (and be proparly connected to a 2x2.5+ 1x1 Sqmm circuit. No extra shall be paid on account of Scaffolding or any other platform structura (LMR) |
| 24 | Wiring for circuit / submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed steel conduit as required. 2 X 1.5 sq.mm + 1 X 1.5 sq.mm earth wire (LMR) |
| 25 | supplying following size of PVC sheathed PVC/XlPE aluminium conductor/ copper conductor for a multi core control armored cable of 1.1 KV grade 4 c 10 square mm aluminium (LMR) |
| 26 | laying of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 KV grade of following sizess direct in ground including excavation and cushioning protective covering and filling the trench etc as required up to 35 square mm (LMR) |
| 27 | supplying and making end termination with brass compression gland and Aluminium Lugs for following size of PVC insulated and PVC sheathed XLPE aluminium conductor cable of 1.1 KV grade as required in 2×10 sqmm (LMR) |
| 28 | Earthig with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long. (with charcoal or coke and salt) as required. (LMR) |
| 29 | S/L 6 SWG copper wire in ground :Supplying and laying 6 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. (LMR) |
| 30 | P/F 25 mm X 5 mm G.I. earth strip on surface or in recess connection as required (LMR) |
| 31 | CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stackingSand below 40 mm nominal size for 10km |
| 32 | CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stackinStone aggregate 40 mmnominal size andabove for 10 km |
| 33 | CARRIAGE OF MATERIALSBy Mechanical Transport including loading, unloading and stacking Bricks for 15 kms |
| 34 | Providing and fixing logos as per approved design and concept. The logos shall be made with 4-6 mm thick exterior grade acrylic backing screwed to the surface with self tapping screws. The backing shall be cut in any shape as approved by the Engineer-in-Charge and also lhave provision for receiving wiring and racess for LED lighting. The main togo shall be affixed on top with the lhelp of firm and stich locks. The design whatever approved shall be printed on top of the front cover in colors as approved by the Engineer-In-Charge. The entire assembly shall be of minimum size 600 x 600 mm and be properly connected to a 2x2.5 + 1x1.5 Sqmni clicult. No extra shall be pald on account of Scaffolding or any other platform structure. (LMR) |
| 35 | Extra for providing Architectural and Structural Consultancy for the design duly vetted by a registered Architect (L/S) |
| 36 | extra for carving on plaster including fastening to the surface by providing skin reinforcement as required and painting the same as directed by the engineer in charge the cost is inclusive of applying necessary tools for carving various floral geometric pattern shapes as approved in the design also included in the cost is framing and clamping any necessary art objects like decorative stone stencils extra to the curved surface the entire surface is to be painted in exterior grade oil Paints or equivalent as per details already approved in two or more layers to provide matching Shades the oil paint surface is to be laquered for even Shine the work is to be executed by trained artisan in the field (LMR) |
| 37 | Extra for providing Jall Work on axisiting wall lining in cuttings or specific areas as por the directions and design approved by the Engineer-in-Charge. Complete with carriage and fitting charges complete. Jall work is to b dona to existing Marble/Stone work in floral/geometri patterns as directed by the EIC, through laser/Cra cutting to the satisfaction of EIC. The cut surfaces are be moulded and sanded to get rid of the sharp edges. wastsges, shall be paid extra to the contractor on th Item. The measurement shall be done of the Visible Area as whole (LMR) |
| 38 | P/F of Pedestal with inaugration plate and brick tile of standard size complete job (LMR) |
| 39 | Demolishing RCC work manually/by mechanical means including stacking of steel bars and disposal of unservicable material within 50m lead as per direction of engineer incharge |
| 40 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 41 | Removal of excavated mulba dismantled or unservicable material from the site of work by mechanical transport or animal transport or otherwise including loading/unloading (complete job) avg d/s 5 kms |
| 42 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 43 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 44 | Providing and laying in position specified grade of RCC including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 45 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 46 | Providing and fixing inaugration plate including writing etc. complete job. (LMR) |
| 47 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 48 | Providing and laying neat slurry coat over sand bed complete job (LMR) |
| 49 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender