Tender For Special Repair To Bldg No T-37 Anarwala Under Ge Dehradun
Tender Value
38.59 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
19 days left
EMD
77180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-37 Anarwala Under Ge Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 3 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | Material and labour for brick work with sub class 'B' brick (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 5 | Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed. |
| 6 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed |
| 7 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed |
| 8 | Material and labour for preparation of old decorated surfaces/ putty surfaces of walls incl complete removal of all existing surface and applying two coats of oil bound distemper in any tint complete all as specified in SSR Part I and directed |
| 9 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and directed. |
| 10 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 11 | Material and labour for providing and applying wall care putty of 1mm to 1.5mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed. |
| 12 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed. |
| 13 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and directed. |
| 14 | Supply and fixing of pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including sanding, tarring backs of chowkhats, PCC 1:2:4 type B-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. |
| 15 | Material and labour for 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 16 | Supply and fix for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding, drilling hole, complete all as specified and directed. |
| 17 | Supply and fixing of steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 18 | Supply and fixing of steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 19 | Material and labour for preparation of old painted steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint with approved shade complete all as specified and directed. |
| 20 | Supply and fixing of powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below and making good of wall surface to match with existing surface including taking down old window/ventilator etc complete all as specified and directed. : - Frame : 44.5 x 44.5 mm x 1.80 mm thickMiddle rail : 44.5 x 44.5 mm x 1.80 mm thick Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with aluminium beading. |
| 21 | Supply and fixing of stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails, complete all as specified and directed. |
| 22 | Material and labour for sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed. |
| 23 | Supply and fixing of butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and directed. |
| 24 | Supply and fixing of 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 25 | Supply and fixing of 150 mm long aluminium handle, fabricated type, anodised etc complete all as specified and directed |
| 26 | Supply and fixing of aluminium alloy, anodised, sliding door bolt size 300 mm with hasp, staple (bolt ype) not less than 12mm dia and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 27 | Supply and fixing of floor door stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in door, overall length of cover plate 140mm complete all as specified and directed. |
| 28 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, ridges, hips, valley gutters etc. complete all as specified and directed. |
| 29 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheets any pattern in roof covering in patches etc of any description complete all as specified and directed. |
| 30 | Dismantling unframed timber scantlings as in rails, posts, rafters, purlins etc under 40 sq. cm in section, in any position all as specified and directed |
| 31 | Supply and fixing of mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe290-W(Gde-E-165), complete all as specified and directed. |
| 32 | Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 33 | Supply and fix for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified and directed. |
| 34 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 35 | Material and labour for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint with spray gun complete all as specified and directed |
| 36 | Material and labour for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 37 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debries out side defence area complete all as specified and directed. |
| 38 | Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in leveling course complete all as specified and as directed. |
| 39 | Material and labour for vitrified ceramic tiles light shade 8-9 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floor etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry @ 3.0 Kg per sqm and pointed in white or coloured cement to match with tile complete all as specified and directed. |
| 40 | Description all as per item No 38 above but as in skirting and over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 41 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 3.00 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 42 | Material and labour for PCC 1:2:4 type B1 (using 20 mm graded mechanically crushed stone aggregate) as in roof kerbs, coping, benching, kneelers, apex stone, bed plates, etc including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc complete all as specified and directed |
| 43 | Material and labour for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to foRunning meter grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, complete including taking down the existing ceiling complete all as specified and directed. |
| 44 | Supply and fixing in repair of stainless steel grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum), complete all as specified and directed. |
| 45 | Dismantling/taking down carefully aluminium/ copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed. |
| 46 | Taking down old unserviceable submain wiring any size/type including earth wire complete with batten/conduit etc complete all as specified and directed. |
| 47 | Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as directed. Please Enable Macros to View BoQ information |
| 48 | Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender