Tender For Construction Of Toilet Points & Wadhu Khana At Imam Bada, Durbal Hamdaniya Colony
Tender Value
12.15 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
2 days left
EMD
24300
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet Points & Wadhu Khana At Imam Bada, Durbal Hamdaniya Colony
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of labourers for clearance of site etc. |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.6.1 All kinds of soil : |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (1 meter from cutting edge ) All kinds of soil |
| 4 | Providing and laying stone soling/ hand packed (above 75 mm) including all sorts of carriages by all means of transport upto site of work complete job . |
| 5 | Providing & laying boulder filling got by lorries including Loading, unloading. Ramming, dressing, and all sorts of carriages complete job as per the directions of EIC |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 10 | Form work centering / shuttering including Strutting, Propping etc and removal of form work for:(a) Foudation, footings, basis, coloums etc |
| 11 | (b) Suspended floors, roofs, landings etc for mass concrete. |
| 12 | (c ) Edges of slabs and breaks in floors |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including all carriages complete job.(TMT Bars) |
| 14 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 15 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structrure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 17 | 12mm thick cement plaster 1:4 mix (1 Cement :4 sand ) |
| 18 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 20 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand andmanufacture |
| 21 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work |
| 22 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
| 23 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 24 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 25 | Providing and fixing/commissioning/testing of electreic lighting points, fan points, exhaust points, bell points, in 1.5mm multi strand copper wite insulated with PVC insulation, copper wire of approved brand, Havells Anchor, run through PVC conduit with clamps, LAID UNDER GROUND, incl.cost of conduit, 9 w led lights ceiling rose, 5amp switch and socket, incl cost of Hylam board, cutting charges etc (complete job) Anchor/Hifi/SSK. |
| 26 | a) Heating Points with 4mm sq. wire . |
| 27 | Providing and fixing exhaust fan of approved make of (box type ) (300 x300 mm) with fittings/accessories complete job as per directions of the Engineer-in-charge. |
| 28 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length. First class kail wood |
| 29 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class Kail wood ( 30 mm thick) |
| 30 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(35 mm thick) 2nd class kail wood) |
| 31 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Pre-laminated particle board with decorative lamination on one sideand balancing lamination on other side, Grade I, Type II IS : 12823 marked |
| 32 | Providing and fixing of fibre sheet ( fixed on back side of washroom door) including fixing with nails/ screws complete job as per the directions of EIC |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 34 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms |
| 35 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 36 | Providing and fixing of floor trap ( 100 mm ) complete job as per the directions of EIC |
| 37 | Providing and fixing CP soap dish holder of requried size /make pattern with concealed fitting arrangements, complete job as per the directions of EIC |
| 38 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length. |
| 39 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 40 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work-exposed on wall with clamps at 1.00 meterspacing PN-16 pipe , 25mm OD(SDR-7.4) |
| 41 | Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe ,A) 32mm OD(SDR-7.4) |
| 42 | b) 25mm OD(SDR-7.4) |
| 43 | Providing and fixing PPR Union 32mm |
| 44 | Providing and fixing PPR Unions 25mm |
| 45 | Providing & fixing of Water Booster pumps (Water lifting pump of approved quality and make approved by engineer incharge including all necessary fitting complete job) (A) a) 1.0 hp |
| 46 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 47 | P/F of PVC pipe/fittings line heavy duty (Prince made). (Grade-B) with fittings complete job. A) 100 mm dia |
| 48 | 150 mm dia |
| 49 | Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC. |
| 50 | Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness. |
| 51 | Construction of manhole chamber in cement conrate 1:3:6 mix including all allied items like earth work, soling, cement concrete 1:4:8, internel plastering 1:4 and flooring 50mm in 1:2:4 mix including PVC frame and cover complete job as per directions of the engineer incharge .(300 x300 mm size ) |
| 52 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job including all carriages complete job.(a) (Welded.) |
| 53 | Providing Hi-Rib /Tile profile sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks/Self Driven Screws, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers including all carriages complete job as directed at site by engineer incharge.( 0.50 mm thick) |
| 54 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 55 | Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size ) |
| 56 | Providing and fixing of readymade wood paneling of 12mm (net thickness) including providing and fixing of 12mm ply with screws, wooden plugs,wooden cornice including finshing with two or more coats of touchwood with fevicol wash, wood filler complete job as per directions of EIC |
| 57 | Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 58 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 59 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 60 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge:1:3:6 or richer mix (i/c equivalent design mix |
| 61 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 62 | Lifting / disposal of excavated/ dismantelled unservicable material from site of work to dumping site by mechinical transport including loading,unloading beyond municipal limits. as per direction of Engineer-in-charge: |
| 63 | Carriage of materials by mechanical transport from source upto the site of work complete job .A) Stone agg 40mm from Athwajan 15 kms lead |
| 64 | b) Stone agg 20mm from Athwajan 15 kms lead |
| 65 | Sand from Ganderbal 25 Km lead Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender