Tender For Special Repair To Bldg No P-31 And P-262/01 To 04 (04 Quareters) Of Otm Accn At Sangrur Under Ge (S) Patiala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jul 2026
1 days left
EMD
91300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-31 And P-262/01 To 04 (04 Quareters) Of Otm Accn At Sangrur Under Ge (S) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 3 | Supplying and applying for two component elestomeric acrylic polimer modified cementitious water proofing coating on brick wall SmartCare Damp Block 2k or approved eqivalent having 1005 elengotation as per ASTMD412 , resisting 5 bars hydrostatic pressure as per DIN 1048 reduction to rapid chloried 70 as per ASTMC 1202 ,crack bridging up to 1.2 mmas per ASTM 4548.5 The Coating shall havefood grade Certificate from laboratories like CFTRI, will be applyon both Positive & Negative side and resist upto 5 Bars of Hydrostic pressure .The mixing ratio of coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing etc .After coating will sprinkle sand on the coating then theh apply plaster on the coating which is in contractor scope complete all as manu facture specification & complete all as specified and directed. |
| 4 | M&L 10mm thick cement plastering in cement mortar CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L 15mm thick cement plaster in Cement mortar 1:4 on brick or concrete surfaces of wall finishing the surface even and smooth without using extra cement complete all as specified and directed |
| 6 | M&L for Rendering 5mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for Complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed. |
| 8 | Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI. complete all as specified and directed.Note- (i) The contractor shall submit manufacturer generated 04 years warranty card for each buildings treated/ painted during submission of Final Bill and guarantee amount @ 5% will be kept as reserve till completion of warranty period and will be released thereafter. Any deterioration during the warranty period will be rectified by the contractor without any financial effect within a week.(ii) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior/Interior Paint, Putty etc after approval by the GE.(iii) The Contractor shall upload with the documents under cover I \\"Memoradum of Understanding\\" (MOU) as per format given in Annexure ‘A’ after Schedule 'A' Notes with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(iv) Cost of T&P and a scaffolding/Jhoola, trestles, ladders, cradeles, centring, crane, boom lifts/ crane of any type and shuttering etc necessary for execution of work and protective measures complete upto all height shall be deemed to be included under respective item.(v) Cost of temporary covering to all joinery items (like doors, windows, window panes), sanitary fittings, dado/skirting, floors, etc to protect them from splashes.(vi) Packing material/empty Buckets will not be handed over to the contractor and will be property of the MES and will be disposed off with the permission of the Engineer-in-Charge and GE. |
| 9 | (vii) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.(viii) Sample patch of 10Sqm be prepared and shall be got approved from GE prior to carrying out further work.(ix) Cost of removing of nails, making good holes, filling of cracks with acrylic crack filler paste etc shall be deemed to be included under respective item.(x) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. |
| 10 | M&L Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed. |
| 11 | M&L for Preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling surfaces complete all as specified and directed. |
| 12 | M&L Preparation of old plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed. |
| 13 | M&L for Preparing old plastered surfaces of ceilings and applying one coat of white wash in complete all as specified and directed. |
| 14 | M&L for applying acrylic wall care putty on internal/external surfaces of walls/ceilings/soffits(thickness vary from1.5to2.5mm as required for desired smoothness and levelling of surfaces in two or more layers)by us ingready made wall careputty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. |
| 15 | Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed. |
| 16 | M&L for Brick work with Fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed |
| 17 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 18 | All as per srl item no 16 hereinbefore but n. exc 1.5 sqm each, complete all as specified and directed. |
| 19 | S&F Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, complete as specified,size 105x 60mm complete all as specified and directed.Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish. |
| 20 | S&F Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate,size 125x 60mm complete all as specified and directed.Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item |
| 21 | M&L Plain cement concrete (1:3:6) type C-0,using 12.5 mm graded mechanically crushed stone aggregate as in back filling of pressed steel frame /hold fast blocks etc and similar complete all as specified and directed. |
| 22 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 23 | S&F 35mm 2nd class hard wood Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 24 | S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section and fixed complete all as specified and directed. |
| 25 | S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed. |
| 26 | S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size, complete all as specified and directed. |
| 27 | S&F Mild steel butt hinges of size 100mm medium weight cold rolled, complete all as specified and directed. |
| 28 | S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm, complete all as specified and directed. |
| 29 | S&F 300 mm long MS rat tail pattern spring hinge (helical door spring) including roller and roller plate, complete all as specified and directed. |
| 30 | Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf.(c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.(d) Note:- For Cooler fixing arrangement 08 nos shutter Each window. |
| 31 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 32 | Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size complete all as specified and directed. |
| 33 | S & F Wire netting of galvanised steel wire 1.40mm dia and size of mesh 25mm fixed with wooden beds tinned tacks of wire staples complete all as specified and directed. |
| 34 | M&L Preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel pain and one coat of pink primer complete all as specified and directed. |
| 35 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed. |
| 36 | Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises complete all as specified and directed. |
| 37 | M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates in complete all as specified and directed. |
| 38 | M&L for Vitrified ceramic coloured tiles 10 mm thick (square/rectangular) area of each tile n.exc 0.38 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed beeding in CM 1:6 complete all as specifed and directed. |
| 39 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed of 15 mm thick in CM 1:6 complete all as specified and directed. |
| 40 | M&L for glazed ceramic coloured tiles of size 450X 300X 7mm thick thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed.complete |
| 41 | M&L for Pre polished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 20 mm thick laying floor finished in cement mortor 1:6 complete all as specified and directed. |
| 42 | S&F 18 mm thick 600 kg/cum LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. |
| 43 | S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. |
| 44 | S&F Paino/continuous hinge of size 30 mm stainless steel complete all as specified and directed. |
| 45 | S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 Kg complete all as specified and directed. |
| 46 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacture's instructions complete all as specified and directed. |
| 47 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed. |
| 48 | M&L Clean Sawn Timber framed and fixed in Second class Soft wood Scantlings as in Wall/Ceiling complete all as specified and directed. |
| 49 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed. |
| 50 | Taking up or down steel tubing of size15mm bore and removal to store complete all as specified and directed. |
| 51 | Taking up or down steel tubing of size 20mm bore and removal to store complete all as specified and directed. |
| 52 | Supply & laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with and incl fittings fixed on walls/ceiling or laying in floors complete all as specified and directed. |
| 53 | Supply & laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with and incl fittings fixed on walls/ceiling or laying in floors complete all as specified and directed. |
| 54 | S&F in repair Stainles steel chromium plated 20mm curtain rod with fixing brackets, stops rollerss complete incl fixing brackets, stops etc all as complete all as specified and directed.Note: For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 55 | Dismantling of brick tiles or terracing tiles single layar on roofs complete all as specified and directed. |
| 56 | Demolation of mud puska on roof any thickness complete all as specified and directed. |
| 57 | Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc complete all as specified and directed. |
| 58 | M&L for PCC 1:3:6, type B-0 using 12.5 mm graded stone aggregates as in padding over roof ,minimum thickness at khurra as 25mm maintain a slope of 1:100 using water proofing compound complete all as specified and directed. |
| 59 | M&L for Cutting grooves in brick wall ,75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 60 | M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregates as in roof kerbs or mud stops/ coping etc including weathering slightly rounded or chamferred complete all as specified and directed. |
| 61 | Providing and laying APP (Atactic polypropylene polymer) modified pre-fabricated five layer water proofing memorene 3 mm thick having weight not less than 3.60 kg/sqm black finished reinforced with non wooven polymer matt fix after applying one coat of cold applied solvant based bituminious primer @ 0,40 ltrs per sqm using botane torch and sealing all joint etc confirming to IS 3488 and cement plaster 15 mm thick in cm 1:3 all as per manufacturer instruction complete all as specified and directed. |
| 62 | M & L cement concrete tiles 20-22 mm thick , type B-1 type (1:2:4) pointed in neat cement slury over 15mm thick sceed bed in CM (1:4) complete all as specified and as directed. |
| 63 | M&L for PVC ( SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls including flat iror clamps 25x3mm complete all as specified including taking out old damaged AC rain water pipes complete all as specified and as directed. |
| 64 | M&L for PVC (SWR) bends of any radius for 110 mmdia rain water pipes with rubber ring joints a complete all as specified and as directed. |
| 65 | Dismanteling 500ltr water storage tank complete all as specified and as directed. |
| 66 | S& F Rotational moulded polythene water storage tank (ISI Marked) cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl 20 mm bore ball brass valves high pressure with polythene float and fly nut all as specified in SSR Part-1. complete all as specified and as directed. |
| 67 | S&F in repair 125mm Brass chromium plated shower rose with arms complete all as specified and directed. |
| 68 | S&F in repair CP stop cock concelled cast copper alloy with crutch screwed down screwed for brass ferrule for 15 mm bore pipe after of any description complete all as specified and as directed. |
| 69 | S&F in repair Bib taps for 15 mm dia bore pipe cast copper alloy cromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 70 | S&F in repair Pillar taps hot and cold mixture Cast copper alloy fancy type 15mm bore, with capstan heads chromium plated screwed down high pressure and fixed complete all as specified and as directed. |
| 71 | S&F in repair wall mixer hot and cold mixture Cast copper alloy fancy type 15mm bore, with capstan heads chromium plated screwed down high pressure and fixed complete all as specified and as directed. |
| 72 | S&F in repair Angle stop valve/ Angle valve cast copper alloy chromium plated with capstan head, long shank and cup screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipeafter taking down old stop cock of any description complete all as specified and as directed. |
| 73 | S&F in repair 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed, |
| 74 | S&F in repair Viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed |
| 75 | S&F in repair 600mm x 450mm mirror of selected quality glass mounted on 6mm thick AC building board with alluminium frame all around hanging to wall with rawal plug and iron slits cup washers complete all as specified and as directed. |
| 76 | S&F in repair Tubular towel rail, CP 20mm dia, 60cm long between flanges fixed in repairs complete all as specified and as directed. |
| 77 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 78 | S&F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends , high pressure(wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed. |
| 79 | S&F in repair Viterous china ware wash down water closet Padestal petern with P trap including connection to flushing pipe, anti syphonage pipe complete all as specified and as directed. |
| 80 | S&F in repair glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracketguard and ralling 60 cm long any size including fixing complete all as specified and as directed. |
| 81 | S&F in repair Soap dish approx size 160x160x90mm any type including fixed to plugs with CP brass screw complete all as specified and as directed. |
| 82 | S&F for 15mm bore Health faucet with CP felxible pipe of 1.25metre long incl making connection and fixed in position complete all as specified and directed . |
| 83 | S&F in repair 32mm bore waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and othter end fixed complete all as specifed and as directed. |
| 84 | S&F in repair PVC waste pipe 32mm dia complete all as specifed and as directed |
| 85 | M&L PCC (1:3:6) type C-1 (using 20 mm graded aggregate) as in PCC path/ plinth protection 75mm thick. finished the surfaces even and smooth with out using extra cement complete all as specified and as directed. |
| 86 | M&L Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, ceilings and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including cutting grooves in brick /concrete wall and preparation of surfaces to receive finishes complete all as specified and directed. |
| 87 | M&L Granite 20mm thick (of Z Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing complete laid over and including 15mm thick screed bed or bedding layer in CM(1:4) , in complete all as specified and directed. |
| 88 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 89 | M&L for Pre polished Machine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 90 | S&F mild steel powder coated peg set of 6 fixed to wall with steel screws complete all as specified & directed. |
| 91 | S&F Stainless steel wall mounted kitchen wire rack of size 750mm X600mm X 250 mm complete all as specified and as directed. |
| 92 | S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 100 mm bore with sand cast paper complete all as specified and as directed. |
| 93 | S&F cast iron 100mm sand cast vent cowl with cement joints bore with sand cast paper complete all as specified and as directed. |
| 94 | S&F CI floor trap with grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed. |
| 95 | S&F CI P & S trap with grating including jointing to waste pipe in neat cement 100 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed. |
| 96 | S&F 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 97 | S&F 100mm Branch pieces, double/cross, T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. |
| 98 | S&F 100mm bore Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 99 | S&F for Solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet re-inforced with M.S square tube, suppyling and fixing in opening as per specification and drg complete all as specified and directed.. |
| 100 | S&F for factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheets to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppying and fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 101 | S&F for butt hinges medium weight cold rolled mild steel 75mm complete all as specifed and directed. |
| 102 | S&F for 100 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 103 | S&F for 100 mm long anodised extruded aluminium alloy handles (D type), fabricated type. complete all as specified and directed. |
| 104 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, finshed flat rough finished surfaces etc.complete all as specified and directed. |
| 105 | M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges, finshed flat rough finished surfaces etc.complete all as specified and directed. complete all as specified and directed. |
| 106 | M&L for Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe and complete all as specified and as directed. |
| 107 | M&L Preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and as directed. |
| 108 | M&L Preparation of old plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and as directed. |
| 109 | M&L 2nd class softwood not exc 3 Sq cm Plain Fillets, square, Rectangular or traingular in sec ,clean swan ,Secured with nails or brads complete all as specified and as directed. |
| 110 | S&F Cooler stand Joist, channel, angle, or tee sections, fixed independently, without connecting plates, conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and as directed. |
| 111 | S&F framed work as in doors or gates of angles or other section with gussets plate rails braces etc complete drill for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hook and hinges or steel hanging door fitting steel sheeting or other covering, running rails and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-O or Fe 310-O, including taking down old steel gate complete all as specified and as directed. |
| 112 | M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron, complete all as specified and directed. |
| 113 | Demolition of reinforced cement concrete of any description (Reinforecement cut as required to facilitate demolition ) complete all as specified and as directed. |
| 114 | M&L for reinforcement cement concrete (Normal mix )1:2:4 Type B1 (20mm graded aggregate) as in slab support on wall, beams and collums in floor roof landing balconies deck slab and in shelves and complete all as specified and as directed. |
| 115 | M&L for reinforcement cement concrete (Normal mix )1:2:4 Type B0 (12.50mm graded aggregate) as chajja complete all as specified and as directed. |
| 116 | M&L for TMT bars 10mm dia and over mild steel as in reinforcement, cut to length bent to shape required including cranking and bending with MS wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 117 | M&L for brick work in cement mortar (1:4) using sub class 'B' bricks staight or curved on plan to any raidus but in half thick brick walls complete all as specified and as directed. |
| 118 | Taking down carefully copper/ aluminium point wiring (light,fan, socket or power) complete along with fittings such as switches, ceiling roses,regulators, tube fittings and other Kits & fittings/conduit from surface /wall .Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location, complete all as specified and directed. |
| 119 | M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified and directed. for the following:- |
| 120 | One light/fan point controlled by one 1-way switch, complete all as specified and directed. |
| 121 | One 3/5 pin socket outlet, 5 Amp on independent board, complete all as specified and directed. |
| 122 | One 3/5 pin socket outlet, 5 Amp on same board, complete all as specified and directed. |
| 123 | One bell /buzzer point controlled by one push button on independent board, complete all as specified and directed. |
| 124 | M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified and directed. |
| 125 | Dismantling / Taking down existing unserviceable sub main wiring from batten / conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location, complete all as specified and directed. |
| 126 | M &L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 6 Sqmm single core through concealed rigid nonmetallic PVC conduit of suitable size (Not less than 25 mm dia) in wall and surface of ceiling including 6 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly including making good the disturbed potion of wall complete all as specified and directed.(Note :- Two run of 6 Sqmm copper cable one run of 6 Sqmm copper cable and PVC conduit will be measured as a single length) |
| 127 | S&F Switch Modular type, 6 Amp, 240 Volts , one way complete fixed as in repair complete all as specified and directed. |
| 128 | S&F Switch Modular type, 16 Amp,240 Volts , one way complete fixed as in repair complete all as specified and directed. |
| 129 | S&F Socket outlet, Modular type, 6 Amp complete fixed as in repair complete all as specified and directed. |
| 130 | S&F Socket outlet, Modular type, 6&16 Amp complete fixed as in repair complete all as specified and directed. |
| 131 | S&F Fan regulator, modular type electronic step type complete all as specified and directed. |
| 132 | S&F in replacement of Modular ceiling rose surface type complete all specified and as directed. |
| 133 | S&F in replacement of LED lights fitting 1x20 Watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 134 | Supply & fix LED bulk head ,10 W complete with connection all as specified & directed |
| 135 | Supply & fix in replacement of Lamp holder modular type, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts complete all as specified and directed. |
| 136 | Supply & fixing LED inverter Bulb 9 Watt (CDL) cool day light, Make -Havells, Model- 9 W B22 LED Inverter Bulb Cool Daylight, complete all as specified and directed. |
| 137 | Supply and fixing LED Street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver & lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 138 | M&L for taking down ceiling fan of any descrptions, servicing, rewinding, and complete repairs, painting of fan as required, fixing back, or fixing new ceiling fan for proper functioning, Including connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing) and writting MES No. with black/white synthetic enamel paint complete all as specified and directed. |
| 139 | Supply and fix of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep grouting and making good the disturbed surface shall be part of job at no extra cost and writting MES No. with black/white synthetic enamel paint complete all as specified and directed.Note:-Unsv E/Fan will be deposted to MES office |
| 140 | S&F in replacement of Geyser (water heater) vertical storage type 240 volts, 2000 Watt, water proof IPX-4 protection having adjustable knob for temperature settings, copper cell of 25 Ltr capacity, 5 star rating with all accessories such as safety valve, thermostate, NRV, connection piece etc. and incl cost of anchoring arrangement (nut & bolts) to the wall, corded copper electric cable etc., incl dismantling of existing geyser and writting MES No. with black/white synthetic enamel paint complete all as specified and directed.Note:-Unsv Geysers will be deposted to MES office |
| 141 | S&F in replacement of MCB DB SPN 8 Way with acrylic double door complete all as specified and directed. |
| 142 | S&F in replacement of VTPN DB including flushing in wall MCB distribution board Vertical TPN 4 way, 415 Volts AC, double door type, sheet steel phosphotised powder painted with bus bar neutral earth bar including provision of MCB TPN, FP 100 Amp conforming to IP 43 as incomer all as complete specified and directed. |
| 143 | S&F MCCB 4 pole 100 Amp 415 volt with breaking capacity of 16 KA complete all as specified and direceted. |
| 144 | S&F MCB SPN 240V 40 Amps C series 10 KA complete all as specified and direceted. |
| 145 | S&F MCB SP 240V 6 to 32 Amps C series 10 KA complete all as specified and direceted. |
| 146 | Taking down old U/S LT UG cable of any size from trenches/pipe/floor/walls complete all as specified and directed. |
| 147 | Supply, laying and jointing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt, 3.5 core, 35 Sqmm cross sectional area, laid in trenches/wall/ducts/pipes, including all necessary fixing arrangements such as cable lugs and glands etc, after removal of existing unsv cable, to the satisfaction and complete all as specified and directed. |
| 148 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in any type of soil complete all as specified and directed. |
| 149 | Returning filling in including ,spreading,levelling,watering and well ramming in layers not exc 25cm thick each complete all as specified and directed. |
| 150 | Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed |
| 151 | M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified. |
| 152 | Supplying & laying factory made unreinforced Pre cast concrete cable covers, class LV, type 1 flat of size 250 x 150 x 40mm laid in trenches as protection to cables complete all as specified and directed. |
| 153 | S&F GI pipe of size 50 mm dia in wall, ground & on pole complete all as specifed & directed. |
| 154 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I, complete all as specified and directed. |
| 155 | S&F Bell Push, Modular type, 6 Amp complete fixed as in repair complete all as specified and directed. |
| 156 | S&F in replacement of LED batten tubelight 1x10 Watt, 220 V, energy efficient including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 157 | S&F in replacement of bell ding dong operating on AC 230 volt single phase complete all as specified and directed. |
| 158 | M&L for taking down elect water heater of any descriptions, servcing and complete repairs of geyser as required, painting outer body, fixing back, connecting with new PVC connections and testing the geyser for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed. |
| 159 | Taking Down the KWH meter along with wooden board/DB after removing all electrical connection complete all as specified and directed. |
| 160 | M&L for refixing & connecting the same or new serviceable KWH energy meter after wiring complete all as specified and directed. |
| 161 | S&F Sheet metal enclosure factory made suitable size meter box made out of 2mm thick ms sheet with double door with locking arrangement , epoxy power coated holes drilled for cable entries suitable for accomodating electric energy meter including brick/cement works as per site requirement includiing flushing the box in walll and making good the disturbed portion of wall /surface complete all as specified & directed. |
| 162 | M&L for providing trenchless road/pavements/hardstanding crossing by horizontal boring for laying GI pipe up to 80 mm dia for LT cable, without damaging road surface, including supply of GI pipe, back filling & restoration of pits/surfaces to match existing road/surface, rate inclusive of all labour, T&P, materials, complete all as specified and directed. |
| 163 | Supply, laying and jointing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt, 4 core, 25 Sqmm cross sectional area, laid in trenches/wall/ducts/pipes, including all necessary fixing arrangements such as cable lugs and glands etc., complete in all respects after removal of existing unsv cable, to the satisfaction and complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender