Tender For Repair And Maintenance Of Centrifugal/ Submersible/ Monoblock Pumpset And Misc Items Under Jurisdiction Of Ge (A) Jaisalmer
Tender Value
49 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
1 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance Of Centrifugal/ Submersible/ Monoblock Pumpset And Misc Items Under Jurisdiction Of Ge (A) Jaisalmer--(b) Casing Ring(c) Impeller ring brass nut(d) Impeller key(el Coupling keyCoupling rubber bushes/ Tyre coupling(g) Shaft sleeve (Steel)(n) Ball Bearing
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling & taking down existing centrifugal pump set from platform and disconnecting suction & delivery pipe line & electrical connections, transport the same to workshop for repair (i.e machining work, welding, grinding, turning & polishing, lathe work, filler work etc. complete as required at site) and after repairing transporting the pump set from workshop to site, installation at site connecting suction & delivery pipe and electrical connection complete all as directed by Engineer-in-charge for following pumps capacity NOTE:-(i) The rate is deemed to be included the cost of providing foundation nuts, bolts & washers, gland packing, greasing, oiling and oil sheet gasket. (ii) S&F of spare parts will be measured and paid separately under relevent items of Sch 'A' . No extra payment will be made to the contractor for any additional requirement for fixing/ reinstalling the pump motor set.(iii) Gland packing, greasing and oiling should be changed at the time of repairs). |
| 2 | (a) 180 HP |
| 3 | (b) 100 HP |
| 4 | (c) 75/70/60 HP |
| 5 | (d) 40/30/25 HP |
| 6 | (e) 20/15/12.5 HP |
| 7 | (f) 10/7.5 HP |
| 8 | Supply & fix the following spare parts against Srl Item No 1.00 above suitable for 180 HP capacity centrifugal pump sets. |
| 9 | (a) CI Impeller |
| 10 | (b) Casing Ring |
| 11 | (c) Impeller ring brass nut |
| 12 | (d) Impeller key |
| 13 | (e) Coupling key |
| 14 | (f) Coupling rubber bushes/ Tyre coupling |
| 15 | (g) Shaft sleeve (Steel) |
| 16 | (h) Ball Bearing |
| 17 | (j) Brass Bush |
| 18 | (k) MS coupling (Beam, Jaw, Gear any type for both Pump and motor) |
| 19 | (l) Gland cap CI |
| 20 | (m) Gland bolt/ nut (stud) |
| 21 | Supply & fix the following spare parts against Srl Item No 1.00 above suitable for 100 HP capacity centrifugal pump sets. |
| 22 | (a) Impeller ring brass nut |
| 23 | (b) Impeller key |
| 24 | (c) Coupling key |
| 25 | (d) Coupling rubber bushes/ Tyre coupling |
| 26 | (e) Shaft sleeve (Steel) |
| 27 | (f) Ball Bearing |
| 28 | (g) Brass Bush |
| 29 | (h) MS coupling (Beam, Jaw, Gear any type for both Pump and motor) |
| 30 | (j) Gland cap CI |
| 31 | (k) Gland bolt/ nut |
| 32 | Supply & fix the following spare parts against Srl Item No 1.00 above suitable for 75/70/60 HP capacity centrifugal pump sets. |
| 33 | (a) CI Impeller |
| 34 | (b) Casing Ring |
| 35 | (c) Impeller ring brass nut |
| 36 | (d) Impeller key |
| 37 | (e) Coupling key |
| 38 | (f) Coupling rubber bushes/ Tyre coupling |
| 39 | (g) Shaft sleeve (Steel) |
| 40 | (h) Ball Bearing |
| 41 | (j) Brass Bush |
| 42 | (k) MS coupling (Beam, Jaw, Gear any type for both Pump and motor) |
| 43 | (l) Gland cap CI |
| 44 | (m) Gland bolt/ nut (stud) |
| 45 | Supply & fix the following spare parts against Srl Item No 1.00 above suitable for 40/30/25HP capacity centrifugal pump sets. |
| 46 | (a) CI Impeller |
| 47 | (b) Casing Ring |
| 48 | (c) Impeller ring brass nut |
| 49 | (d) Impeller key |
| 50 | (e) Coupling key |
| 51 | (f) Coupling rubber bushes/ Tyre coupling |
| 52 | (g) Shaft sleeve (Steel) |
| 53 | (h) Ball Bearing |
| 54 | (j) Brass Bush |
| 55 | (k) MS coupling (Beam, Jaw, Gear any type for both Pump and motor) |
| 56 | (l) Gland cap CI |
| 57 | (m) Gland bolt/ nut (stud) |
| 58 | Supply & fix the following spare parts against Srl Item No 1.00 above suitable for 20/15/12.5 HP capacity centrifugal pump sets. |
| 59 | (a) CI Impeller |
| 60 | (b) Casing Ring |
| 61 | (c) Impeller ring brass nut |
| 62 | (d) Impeller key |
| 63 | (e) Coupling key |
| 64 | (f) Coupling rubber bushes/ Tyre coupling |
| 65 | (g) Shaft sleeve (Steel) |
| 66 | (h) Ball Bearing |
| 67 | (j) Brass Bush |
| 68 | (k) MS coupling (Beam, Jaw, Gear any type for both Pump and motor) |
| 69 | (l) Gland cap CI |
| 70 | (m) Gland bolt/ nut (stud) |
| 71 | Supply & fix the following spare parts against Srl Item No 1.00 above suitable for 10/7.5 HP capacity centrifugal pump sets. |
| 72 | (a) CI Impeller |
| 73 | (b) Casing Ring |
| 74 | (c) Impeller ring brass nut |
| 75 | (d) Impeller key |
| 76 | (e) Coupling key |
| 77 | (f) Coupling rubber bushes/ Tyre coupling |
| 78 | (g) Shaft sleeve (Steel) |
| 79 | (h) Ball Bearing |
| 80 | (j) Brass Bush |
| 81 | (k) MS coupling (Beam, Jaw, Gear any type for both Pump and motor) |
| 82 | (l) Gland cap CI |
| 83 | (m) Gland bolt/ nut (stud) |
| 84 | Taking down the existing motor/pump from base plate after disconnecting the electrical connection and transporting to workshop for repair (i.e machining work, welding, grinding, turning, polishing, lathe work & filler work etc.) & taking out burnt out copper winding complete and cleaning properly. Rewinding the motor with same gauge and same turn ratio for proper RPM, best quality copper enamelled winding wire and packing properly with packing materials, varnishings, drying & replacing wornout bearing/terminal plate, reassembling, fixing in it's original position, testing & commissioning & transporting after repairing complete of following sizes all as directed by Engineer-in-charge. Note :- Supply only bearings will be measured and paid separetely under respective item of this schedule. |
| 85 | (a) 180 HP |
| 86 | (b) 100 HP |
| 87 | (c) 75/70/60 HP |
| 88 | (d) 30 HP |
| 89 | (e) 25 HP |
| 90 | (f) 20/15 HP |
| 91 | (g) 12.5/10 HP |
| 92 | (h) 7.5 HP |
| 93 | Supply and fix in repairs motor cooling fan of same size and capacity as per existing motor including all fiiting, fixtures etc as directed by Engineer-in-charge for the following : - |
| 94 | (a) 180/100 HP |
| 95 | (b) 75/70/60 HP |
| 96 | (c) 30/25/20 HP |
| 97 | (d) 15/12.5/10 HP |
| 98 | (e) 7.5/05/03 HP Please Enable Macros to View BoQ information |
| 99 | (e) 7.5/05/03 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender