Tender For Special Repair To 73 X Or Md Accn At Albert Ekka Lines Under Ge (North) Ambala Cantt
Tender Value
4.64 Crore
Estimated cost
Bid Submission
30 Jul 2026
23 days left
EMD
5.40 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To 73 X Or Md Accn At Albert Ekka Lines Under Ge (North) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I (B/R WORKS): Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exe 1.50 each complete all as specified and as directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exe 1.5 Sqm and n exe 4 sqm each and removing from the site to store complete all as specified and as directed. |
| 3 | Taking down and refixing in same opening of shutters of any description exc 1 sqm but n exc 2 sqm each with iron mongeries complete all as specified and as directed. |
| 4 | Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each with iron mongeries complete all as specified and as directed. |
| 5 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed.Fe–310–0 complete all as specified and as directed. |
| 6 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed.Fe–310–0 complete all as specified and as directed. |
| 7 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and as directed. |
| 8 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and as directed. |
| 9 | Supply and fixing joint less factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and as directed. |
| 10 | Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :–(a) ERW hollow P section of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces.(b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T–section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf. (c) Vertical mullion shall be ERW hollow T–section of size 60 x 25 mm made from 1.25 mm thick MS sheet(d) The above steel window shall be deemed to include the following accessories/ fittings :i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape–04 Nos per windowii) Handle of Z section 20mmx25mm, 100mm long–01 No per leaf.iii) MS tower bolt stove enamelled 150mm long– 2 Nos per leaf.iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. |
| 11 | (v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leaf.vi) Pintal hinges 12 x 75 mm – 2 Nos each leaf.vii) 10mm square Guard bar @ 10 cm c/c welded to frame.(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws.(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B–1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 12 | Supply and fixing box type using ERW hollow 'P' section ventilators fixed type with glazing bar including MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer complete all as specified and as directed. |
| 13 | Material and labour for PCC 1:3:6, type C–0 (12.50mm graded crushed stone aggregate) as in bed blocks for hold fast including necesssary formwork complete all as specified and as directed. |
| 14 | Supply and fixing mild steel flat iron as in hold fast clamps articles conforming to Fe–290 Gde E–165 all as specified and as directed. |
| 15 | Supply and fixing for 100mm MS Butt hing medium weight cold rolled complete all as specified and as directed. |
| 16 | Supply and fixing for 200mm long aluminium, anodised, barrel tower bolt of extruded section complete all as specified and as directed. |
| 17 | Supply and fixing for 150mm long aluminium handles, fabricated type, anodised complete all as specified and as directed. |
| 18 | Supply and fixing in aluminium sliding door bolts, 300 mm long plate type, stove enamelled black with bright bolt not less than 16 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and as directed. |
| 19 | Supply and fixing for 3mm thick sheet glass ordinary quality with aluminium beading, rubber packing or oil putty in square n exc 0.5sqm in each pane complete all as specified and as directed. |
| 20 | Supply and fixing for 3mm thick frosted sheet glass ordinary type and glazing with aluminium beading, rubber packing or oil putty in square n exc 0.5 sqm each pane complete all as specified and as directed. |
| 21 | Supply and fixing for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 22 | Supply and fixing for mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate complete all as specified and as directed. |
| 23 | Material and labour for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. |
| 24 | Material and labour for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. |
| 25 | Material and labour for applying two coat of synthetic enamel paint on wooden surface including preparation of old painted wooden surfaces of any description over 10cm width or girth complete all as specified and as directed. |
| 26 | Material and labour for applying two coat of synthetic enamel paint on steel surface including preparation of old painted steel surfaces of any description over 10cm width or girth, complete all as specified and as directed. |
| 27 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed and as specified. |
| 28 | Material and labour for non–skid ceramic colour tiles 7 to 8mm thick (square /rectangular) area of each tiles exe 0.11 sqm but n exe 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 29 | Material and labour for glazed ceramic colour tiles in vertical surface 300X600X7mm thick in dado, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 30 | Material and labour for Non Skid coloured ceramic tiles premium/1st quality 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 31 | Material and labour for Non Skid coloured ceramic tiles premium/1st quality of same description as of floor tiles in serial item No 35 above 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed. |
| 32 | Roughening concrete surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and as directed. |
| 33 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified. |
| 34 | Material and labour for 25mm thick cement concrete 1:2:4 type B–0 (using 12.5mm graded crushed stone aggregate) as in sub base of floors complete all as specified and as directed. |
| 35 | Material and labour for providing 75 mm thick cement concrete 1:3:6, type C–1 (using 20mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified. |
| 36 | Material and labour for PCC 1:3:6 C–1 (using 40mm graded crushed stone aggregate) as in surface channel or drain incl using of necessary form work for fair finish complete |
| 37 | Extra for forming fair finishing of drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitrel gloppid ends etc |
| 38 | Material and labour for 100mm thick PCC 1:4:8 type D–2, (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed. |
| 39 | Material and labour for machine pressed precast concetet interlocking paver block any shape and size over 25 mm thick sand layer conforming to IS 15658–2006 of 60 mm thickness grade M–35 with grey cement and no pigments complete all as specified and as directed. |
| 40 | Material and labour for 20–25mm thick machine cut kota stone slab as in floor/ treads of step with bull nosed edge over 20mm thick screed bed in CM 1:4 set and jointed in neat cement slurry mixed with pigment to match the shade including grinding and polishing complete all as specified and as directed. |
| 41 | Material and labour for 20–25mm thick machine cut kota stone slab over as in skirting, riser of steps, dado & pillar etc. over 10mm thick screed layer in CM 1:4 set and jointed in neat cement slurry mixed with pigment to match the shade including grinding and polishing complete all as specified and as directed. |
| 42 | Material and labour for granite (of any type) tiles 15–16mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complet including over 15 mm thick screed bed in CM 1:4 incl dismantling of old finishes any type complete all as specified and as directed. |
| 43 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 44 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 45 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 46 | Material and labour for rendering 15mm thick in cement plaster 1:4 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 47 | Material and labour for rendering 15mm thick in cement plaster 1:6 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 48 | Material and labour for rendering 5 mm thick on ceiling surfaces of brick work or concrete wall surfaces in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed. |
| 49 | Material and labour rough cast plaster complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply under coat in cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed. |
| 50 | Material and labour for preparation of undecorated or new plastered /concrete surface of wall applying of two coats of cement base paint over a coat alkali resistant primer complete all as specified and as directed. |
| 51 | Material and labour for preparation of new plaster surface on walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 52 | Material and labour for preparation of new plastered surface of ceilling applying three coat white wash complete all as specified and as directed. |
| 53 | Material and labour complete removal of existing treatment on walls, pillars, cornices etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed by the Engr–in–Charge. |
| 54 | Material and labour complete removal of existing treatment on walls, pillars, cornices etc (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 55 | Material and labour complete removal of existing treatment on ceiling etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of white washing complete all as specified and as directed. |
| 56 | Demolition of cement concrete (reinforced) in slabs, cover slabs, shelves, chajja and the like in any position complete all as specified and as directed. |
| 57 | Material and labour for RCC (Nom Mix) Type B–0, 1:2:4 (12.5mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, chajja, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 58 | Material and labour TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 59 | Material and labour form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick, finished rough surfaces of concrete flat complete all as specified and as directed. |
| 60 | Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed. |
| 61 | Demolition of mud in roofs, any thickness, including plastering and leeping (wheather full thickness removed or only a part thereof) complete all as specified and directed. |
| 62 | Material and labour for cement concrete Type B–1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in PCC padding, paving, coping, roof kerbs or mud stops, rounded, door cill, hold fast and other like works complete all as specified and as directed. |
| 63 | Material and labour for providing and laying 3mm thick APP (atactric polypropylenepolymer) modified prefabricated five layer weight not less then 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt, make as approved consisting of a coat bitumious primer @ 0.40 ltr /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25'C temprature and viscosity 70–160 cps over the primer coat, the layer membrane shell be laid using butane troch and sealing all joints etc after preparing the surface complete as per standred practic as per manufactures instructions. The vital physical and chemical parameters of the membrane shell be under :– (i) Joint strength in longitudinal and transverse direction at 23'C at 650/ 450 N /5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150'C when tested in accordance with ASTM (d–5147) (iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only. (vi) Brick tiles jointed and pointed in CM 1:3 mixed with crude oil shell be provided (including over a screed of cement (1:6) 25 mm thick) over APP treatment complete all as specified and as directed. |
| 64 | Material and labour cement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints grouted flush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 65 | Supply and Fixing in repair for 20mm bore gun–metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 66 | Supply and Fixing in repair for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, connecting up pipes, securing access covers etc., and 20mm ball valve with float and flynut screwed to pipe including dismantling of water tanks and removing to store all as specified in SSR Part–I complete all as specified and as directed by the Engineer–in–Charge. |
| 67 | Taking down 15mm bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and as directed. |
| 68 | Supply and Fixing for GI tubing 15mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 69 | Taking down 20mm bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and as directed. |
| 70 | Supply and Fixing for GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 71 | Supply and Fixing in repair 15 mm bore stop valve cast copper alloy fancy type chromium plated long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 72 | Supply and Fixing in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and as directed. |
| 73 | Supply and Fixing in repair 15mm bore bib taps cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 74 | Supply and Fixing in repair PVC connection 15mm size PTMT nuts of length 450mm complete all as specified and as directed. |
| 75 | Supply and Fixing in repair vitreous china wash basin white, flat back, size 550x400 mm including cutting for pinning in ends of brackets or erecting stand, including 32mm bore pvc corrugated waste pipe 900mm long, 32mm bore waste coupling chromium plated long screwed shank and fly nuts etc complete all as specified and as directed. |
| 76 | Supply and Fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as in repair complete all as specified and as directed |
| 77 | Supply and Fixing in repair 15mm bore brass chromium plated overhead shower 200mm x 200mm square shape single flow alongwith 15mm bore shower arm 600 mm long complete all as specified and as directed. |
| 78 | Supply and Fixing in repair vitreous china squatting pan, \\"Orissa pattern\\" of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, flushing pipe, anti syphonage pipe complete all as specified and as directed. |
| 79 | Supply and Fixing in repair vitreous china wash down water closet pan (pedestal pattern) white, incl 'P' trap, connection to drain and flush pipe, antisyphonage pipe and seat cover closed pattern flat bottom, mild steel chromium plated or aluminised hinging device complete and as specified. |
| 80 | Supply and Fixing as in repair heatlh faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 81 | Supply and Fixing in repair 10 litre capacity PVC valveless, syphonic action type flushing cistern low level, white, with inlet ball valve, float and handle incl bracket & PVC 32mm dia flush pipe fixed with WC complete all as specified and as directed. |
| 82 | Supply and Fixing in repair soap dish, vitreous china white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 83 | Supply and Fixing in repair toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 84 | Supply and Fixing in repair pvc corner shelf (set of three) 8mm thick including railing radius 250mm complete all as specified and as directed. |
| 85 | Supply and Fixing in repair grating doom 125mm dia with waste hole of stainless steel complete all as specified and as directed. |
| 86 | Supply and Fixing in repair grating doom 100mm dia of stainless steel complete all as specified and as directed. |
| 87 | Supply and Fixing in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm with 32/40mm bore waste coupling and 32mm bore pvc corrugated pipe 900mm long complete all as specified and as directed. |
| 88 | Taking down of 75/110mm internal dia PVC /cast iron drain pipes /rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including cleaning or refixing or removal to store, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed. |
| 89 | Supply and Fixing for 110mm bore spun pipe for soil, waste and vent single socketed, in any length with cement joints, laid in trenches complete all as specified and as directed. |
| 90 | Supply and Fixing for 100mm bore spun pipe for soil, waste, rain water and vent single socketed, in any length with cement joints, fixed to walls including clamps complete all as specified and as directed. |
| 91 | Supply and Fixing for 110mm spun bends (any radius), diminishing pieces or tapers all as specified and as directed. |
| 92 | Supply and Fixing for 110mm spun Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches all as specified and as directed. |
| 93 | Supply and Fixing for 75mm bore spun pipe for soil, waste and vent single socketed, in any length with cement joints, fixed to walls including clamps complete all as specified and as directed. |
| 94 | Supply and Fixing for 75mm spun bends (any radius), diminishing pieces or tapers all as specified and as directed. |
| 95 | Supply and Fixing for 75mm spun Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches all as specified and as directed. |
| 96 | Supply and Fixing in stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolt and nuts and securing ends of stay to wall or roof of 100mm more then 100mm dia complete all as specified and as directed. |
| 97 | Supply and Fixing in repair 75 mm dia cast iron floor trap with grating incl jointing to waste pipe incl fixed in cement concrete type B–1 (1:2:4) complete all as specified and as directed. |
| 98 | Material and labour for 110mm dia PVC (SWR) gully trap, setting and jointing with solvent complete all as specified and as directed. |
| 99 | Demolition of cement concrete (any type) for existing sunken portion of WC /Floor trap incl removing of all debris from site to a distance exc 250 m but not exc 500m and deposited where directed incl cleaning of surface with wire brushes and water complete all as specified and as directed. |
| 100 | Material and labour in repair for 40mm dia bore GI pipe medium grade as in spout complete all as specified and as directed. |
| 101 | Material and labour for PCC 1:5:10 Type E–2 (using 40mm graded crushed stone aggregate) as in filling in sunken portion floor, rounded or chamfered on edges complete all as specified and as directed. |
| 102 | Material and labour for sunken floor water proofing treatment complete all as under :– (A) scrapping the surface with wire brush and cleaning with water and allow to dry (B) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound (C) 15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape) (D) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound (E) apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.2 kg/sqm. (F) supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm (G) applying one coat of hot blown bitumin grade 85/25 conforming to IS–702 @1.20 kg/sqm (H) curing the sunken portion with water min 48 hours by pondingcomplete all as specified and as directed. |
| 103 | Supply and Fixing in repair 110 mm bore PVC cowls 110mm bore complete all as specified and as directed. |
| 104 | Dismantiling of old wooden/pvc boarding/shelves of Kitchen cabinets and cupboards any description, fixed in any position with nails complete all as specified and as directed. |
| 105 | Supply and Fixing in rep ball catches with 8mm dia steel ball, and brass body or magnetic catcher with striking plate including letting in and fixed complete all as specified and as directed. |
| 106 | Supply and Fixing in repair 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 107 | Supply and Fixing for WPC ply 18mm thick (Minimum density 650kg/Cum) of both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and as directed. |
| 108 | Supply and Fixing for WPC ply 18mm thick (Minimum density 650kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete all as specified and as directed. |
| 109 | Supply and Fixing for 24mm thick WPC ply (Minimum density 650kg/Cum) of single side rigid lamination of approved colour and other side plain white colour fixed with stainless steel screws, solvent cement /adhesive as in shutters of kitchen cabinet/CB and pull out drawer visible side complete as per manufacturer’s specifications complete all as specified and as directed. |
| 110 | Supply and Fixing in rep stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of grade SS304 of size 24\\"x30\\"x10\\" incl screwSupply and Fixingixing arrangements complete all as specified and as directed. Make :– Bluestar /Nirali /Prayag. |
| 111 | Preparing of old brick wall surface incl Material and labour for efflorescence treatment by applying two coat of ultra block 2k chemical of M/s Asian/equivalent in pidilite,Berger,Sikka,Birla through authorised applicator complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 112 | Preparing of old brick wall surface incl Material and labour for efflorescence treatment by applying two coat of ultra block 2k chemical of M/s Asian/equivalent in pidilite,Berger,Sikka,Birla through authorised applicator complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender