Tender For Repairs To Roof, Floor, Joinery, False Ceiling, Plumbing, Sanitary Fitting, Tiling, Periodical Services, Repair To Fencing/Gate, Path, Drain And Camouflage Painting And Concealment For Certain Buildings At 273 Su Afs Under Ge (Af) Bagdogra.
Tender Value
40.91 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
18 days left
EMD
81820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Roof, Floor, Joinery, False Ceiling, Plumbing, Sanitary Fitting, Tiling, Periodical Services, Repair To Fencing/Gate, Path, Drain And Camouflage Painting And Concealment For Certain Buildings At 273 Su Afs Under Ge (Af) Bagdogra.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wrought or mild steel work of any description or otherwise provided for complete all as specified and directed. |
| 2 | M&L steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt, welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed. |
| 3 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings incl ridges complete all as specified and directed. |
| 4 | M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | M&L for Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floor and paving not exceeding 15 cm thick (above and below ground level) complete all as specified and directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed. |
| 7 | M&L 40 mm thick cement concrete type B1 1;2:4 (20 mm graded stone aggregate) finishing concrete surface even and fair w/o using extra cement complete all as specified and directed. |
| 8 | Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 9 | M&L for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed. |
| 10 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 11 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 12 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and directed. |
| 13 | All as per item No.12 above, but area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed. |
| 14 | Taking down shutter of any description exc 1.00 sqm each but n.exc 2.00 Sqm complete all as specified and directed. |
| 15 | S&F second class hard wood (SAL) plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint complete all as specified and directed. |
| 16 | M&L second class hard wood 35 mm thick factory made plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats with rail and stile as per IS-1003(part-1) klin seasoned and chemically pressure treated complete all as specified and directed. |
| 17 | M&L 30mm thick flush shutter, factory made, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. |
| 18 | M&L 2nd class hard wood 30 mm thick glazed and skelton shutter open rebated factory made and prepared to receive glass / gauge etc, edges of framing plain, chamferred or rounded and fitted with cut and mitred beads for securing gauge, size of members as per SSR Part - I section clause 8.20 (a) complete all as specified and directed. |
| 19 | M&L Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 20 | S&F second class hard wood door / window cleat and stopper, article n. exc 200 cum each complete all as specified and directed. |
| 21 | M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 22 | M&LSolid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening complete all as specified and directed. |
| 23 | M&L powder coated anodised aluminium frame for doors, windows, window shutter ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 24 | M&L powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws , 5.5mm thick glass etc. complete all as specified and directed. |
| 25 | M&L Powder coated aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed. |
| 26 | M&L Figured glass 4.0 mm thick pin headed type and glazing wth oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 27 | S&F in repair Mild steel Butt hinges, medium weight, cold rolled of size 100 mm complete all as specified and directed. |
| 28 | S&F in repair aluminium anodised barrel tower bolts of extruded section 150 mm and fixed complete all as specified and directed. |
| 29 | S&F in repair Extruded aluminium handle fabricated type anodised 150mm long complete all as specified and directed. |
| 30 | S & F in repair for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and directed. |
| 31 | S&F aluminium anodised barrel tower bolt 125 mm complete all as specified and directed. |
| 32 | All as per item no 31 above, but 200 mm long complete all as specified and directed. |
| 33 | S&F 250 mm long Aluminium alloy anodised, sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 34 | S&F Mild steel Butt hinge, medium weight, cold rolled of size 75mm complete all as specified and directed. |
| 35 | All as per item No.34 above, but 100 mm size complete all as specified and directed. |
| 36 | S&F 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 37 | S&F in repair 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 38 | S&F 100 mm aluminium alloy handle anodised fabricated type complete all as specified and directed. |
| 39 | All as per item No.38 above, but 150 mm complete all as specified and directed. |
| 40 | S&F for floor door stoppers of brass body and tongue with hard drawn steel spring (overall length of cover plate 140mm) complete all as specified and directed. |
| 41 | S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 42 | M&L in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks/ wire staple / fitted with beads complete all as specified and directed. |
| 43 | M&L galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks/ wire staple / fitted with beads complete all as specified and directed. |
| 44 | Hacking out old broken glass any thickness or size from wooden or matle frames glazed with putty or beads complete all as specified and directed. |
| 45 | M&L Plain sheet glass pane, 4 mm thick, ordinary quality and glazing with oil putty or beads in square not exc. 0.5 Sqm each pane complete all as specified and directed. |
| 46 | M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 47 | Taking down cement plaster from wall including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 48 | M&L 15 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement on wall complete all as specified and directed. |
| 49 | M & L rendering 15mm thick on cement mortar 1:4 brick or concrete work finished the surface even and fair without using extra cement complete all as specified and directed. |
| 50 | M&L for preparation of new plastered surfaces of wall and applying 1.5mm thick Birla or equivalent wall putty and applying two coats of oil bound distemper over a coat of priming paint complete all as specified and directed. |
| 51 | M&L for preparation of new plastered surfaces and applying two coats of came base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 52 | M&L for complete removal of existing treatment of internal wall surfaces and applying 1.5mm thick Birla or equivalent wall putty to old plastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 53 | M&L for preparation of plastered or unplastered old surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 54 | M&L for preparation of plastered or unplastered old ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 55 | Taking up or down old rusted steel tubing 15 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse complete all as specified and directed. |
| 56 | All as per item No.55 above, but 20 mm bore complete all as specified and directed. |
| 57 | M&L15mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/Sq cm fixed to wall or ceiling or laid in floors incl fittings etc complete all as specified and directed. |
| 58 | M&L 20mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/Sq cm fixed to wall or ceiling or laid in floors incl fittings etc complete all as specified and directed. |
| 59 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), floor mounted white with all fittings including fixing bolts, but excluding flushing cistern and flush pipe with and including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel / CP / aluminium / hinging device complete with including ‘P’ or ‘S’ trap complete all as specified and directed. |
| 60 | S&F in repair PVC low level flushing cistern, white, 10 litre capacity, syphonic action type, white body with inlet, ball valve, float , handle, bracket, 32mm bore steel chromium plated flush pipe etc and connecting to WC and water pipe lines complete all as specified and directed. |
| 61 | S&F in repair Vitreous china wash hand basin, flat back, white of size 630x450mm including cutting for and pinning in ends of brackets with and including brackets and 32mm bore 1.50m long DPE waste pipe complete all as specified and directed. |
| 62 | S&F in repair Rotational moulded polyethylene water storage tank,500 litres capacity, ISI marked, multi layer constriction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling water tank and removing to store complete all as specified and directed. |
| 63 | S&F in repair Rotational moulded polyethylene water storage tank,1000 litres capacity, ISI marked, multi layer constriction (cylindrical vertical with closed top), hoisted & fixed in position including dismantaling water tank and removing to store complete all as specified and directed. |
| 64 | S&F in repair Ball brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20 mm bore complete all as specified and directed. |
| 65 | S&F in repair 15mm bore Bib tap chromium plated (Long Body), with wall flange, screwed down, screwed for GI pipe or brass ferrule complete all as specified and directed. |
| 66 | S&F in repair 15mm bore Pillar tap, long neck cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts, with screwed for 15mm bore GI pipe complete all as specified and directed. |
| 67 | S&F in repair PTMT Grating doom 125 mm dia with waste hole of having minimum weight 40gms complete all as specified and directed. |
| 68 | S&F in repair Towel rail, 600mm long chromium plated fixed with and including chromium plated brass screws with wooden plugs complete all as specified and directed. |
| 69 | S&F in repair Soap dish brass chromium plated fixed with and including chromium plated brass screws with wooden plugs complete all as specified and directed. |
| 70 | S&F in repair 15 mm bore Angular Stop cock, chromium plated (concealed type), screwed down, high pressure, screwed both ends for 15mm bore GI pipe or for union complete all as specified and directed. |
| 71 | S&F in repair 600 mm x 450 mm size beveled edge mirror of selected quality glass, 5.50 mm thick, mounted on 6mm thick AC pain building board or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and directed. |
| 72 | S&F in repair Waste fittings, 32mm bore, brass ,chromium plated for glazed ware sink or basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with 32mm bore PVC low density polyethylene waste pipe complete all as specified and directed. |
| 73 | S&F for vitreous china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling complete all as specified and directed. |
| 74 | S & F for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 75 | S&F toilet paper holder, coloured vitreous china, box type fixed in wall complete all as specified and directed. |
| 76 | S&F in repair 15 mm dia PVC connection pipes of 450 mm long with PTMT nut at both ends complete all as specified and directed. |
| 77 | S&F in repair Chromium plated shower roses 125 mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 78 | Demolition of brickwork/stone masnory built in cm including all quoins ,arches ,pillars,etc,but excluding ashlar facings ,dressed stonework and precast concrete articles complete all as specified and directed. |
| 79 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 80 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall built in 1:4 complete all as specified and directed. |
| 81 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 82 | M&L for Screed bed or bedding layer of cement mortar (CM1:4) 15mm thick for laying floor finishes complete all as specified and directed. |
| 83 | M&L for Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished light shade , area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 84 | M&L for Vitrified Ceramic tiles light shade 8-9 mm thick area of each tiles not exc 0.36 Sqm, in skriting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 85 | M&L non skid coloured ceramic tiles 7-8mm thick (square or rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 86 | M&L Preparation of old painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 87 | M&L Preparation of old painted wooden or wooden based surfaces of any description of following width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 88 | M&L Preparation of new painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 89 | S&F for 19mm dia stainless steel decorative curtain rod fixing to all opening and joineries portion complete all as specified and directed. |
| 90 | M&L for stainless steel bracket with end holders complete all as specified and directed. |
| 91 | Demolition of (Un reinforced) Cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 92 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed. |
| 93 | M&L for designed, pre polished chequered cement concrete tiles 25mm thick with grey cement and pigments set, jointed & pointed in neat cement slurry, laid over 20mm thick screed bed in CM 1:6 finished with pigments match the shade of tiles complete all as specified and directed. |
| 94 | M & L for sand cushioning to receive interlocking tiles incl spreading, levelling in layers complete all as specified and directed. |
| 95 | M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade With Grey Cement and pigment complete all as specified and directed. |
| 96 | Demolition of cement concrete of any description and in any position etc complete all as specified and directed. |
| 97 | M&L for Cement concrete (1:2:4) type B1 using 20mm graded aggregate as in surface channels and drains complete all as specified and directed. |
| 98 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed. |
| 99 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, kerbs etc complete all as specified and directed. |
| 100 | Demolition of brick work/ stone masonry built in cement mortar including arches, pillars etc and excluding precast concrete article complete all as specified and directed. |
| 101 | M &L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in 1:6 complete all as specified and directed. |
| 102 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in built in cement mortar 1:4 complete all as specified and directed. |
| 103 | Taking down cement plaster from brick or concrete or stone walls including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 104 | M&L 10mm thick rendering on other than fair faces of brick work or concrete surface built in cement mortar 1:6 surface finished even and fair with using extra cement complete all as specified and directed. |
| 105 | Demolition of RCC of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 106 | M&L for precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) in cover slab for drain etc and placing in position etc complete all as specified and directed. |
| 107 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending, spirally for hoping for columns, hooking ends and binding with and including steel wire not less than 0.9 mm dia, complete all as specified and directed. |
| 108 | Dismantling posts or struts ( steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc and making good disturbed ground to match with the existing surface complete all as specified and directed. |
| 109 | Dismantling of fencing wire mesh of any description complete all as specified and directed. |
| 110 | Excavating in post holes (or similar holes ) in soft/loose soil each not eceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubbnle mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed. |
| 111 | M&L cement concrete type B1, (1:2:4) (Using 20mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 112 | M & L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed. |
| 113 | Supply only Steel round bar 10 mm dia and over for tying chain link fencing etc complete all as specified and directed. |
| 114 | Supply only chain link fencing MS galvanised fencing , any size or type including line wires, any mesh, size and type of standard rails straining bolts, etc. including provision of binding wire complete all as specified and directed. (Note- fixing measured separately) |
| 115 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, rail, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 116 | M&L screw bolts (machine made) with hexagonal or square head at one end and rounded the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n.exc 10 cm and dia of shank 11 to 15mm and fixed in position complete all as specified and directed. |
| 117 | M&L in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured) |
| 118 | Supply and laying concertina coils made up of hard drawn steel wire fabric with 14mm blade clips 05 Nos in each spiral, tape thickness 0.50mm, GI stripping core wire 2.60mm thick and spiral turns per roll is 52 Nos including securing with Y shaped angle iron with available size complete all as specified and directed. NOTE :- One Roll of concertina coil should extend upto 10RM. |
| 119 | M&L Preparation of new untreated steel surfaces as of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 120 | M&L preparation of previously untreated surface of steel n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 121 | M&L Preparation of old painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 122 | Dismantling wrought iron or steel work of any description not otherwise provided for complete all as specified and directed. |
| 123 | M&L Framed work such as grills, grating etc. with ends of bars shouldered and/or riveted or forged or spikes, framed, guard bars, barred iron doors, ladders, framed including pintle hinge, stops, hand-made sliding bolts, etc. conforming to FE-290 (Gde E-165) complete all as specified and directed. |
| 124 | Taking down cement plaster from wall including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 125 | M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and fair (without using extra cement) with water proofing compound as per manufacture's instruction complete all as specified and directed. |
| 126 | Supply only liquid water proofing compound complete all as specified and directed. |
| 127 | M & L for preparation of new plastered surface of walls and applying two coats of exterior emulsion (weather coat) over a coat of alkali resistant exterior primer in different for camouflage and concealment of sigma II software design/ patterns approved by users complete all as specified and directed. |
| 128 | M&L Complete removal of existing treatment of walls/ roof of RCC and AC sheets etc including removal of algae using wire brush and applying two coats of exterior emulsion (weather coat) over a coat of alkali resistant exterior primer in different for camouflage and concealment of sigma II software design/ patterns approved by users complete all as specified and directed. |
| 129 | M&L for preparation of old surfaces of steel/iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint in different tint for camouflage design including necessary scaffolding complete all as specified and directed. |
| 130 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender