Tender For Day To Day Services And Welcome Maintenance With Certain Internal Electric Works To Md Accn And Periodical Services To Md/Otm Accn Including Certain Allied Works At Diat Girinagar, Pune-25
Tender Value
30 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Day To Day Services And Welcome Maintenance With Certain Internal Electric Works To Md Accn And Periodical Services To Md/Otm Accn Including Certain Allied Works At Diat Girinagar, Pune-25
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTIONM&L for cleaning and removing all leaves, plants, mud etc from roof tops/side walls at any height and including applying root killer chemical as per manufacturer’s instructions and making good disturbed portion with PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate)in CM 1:3 and finishing the surface to match with existing surfaces and removing the rubbish to a distance not exceeding 500m complete all as specified and directed. |
| 2 | S&F in repairs for curtain rod of 25mm dia including bracket & end bracket decorative type, stainless steel complete all as specified and as directed. |
| 3 | M&L for removal of trees/plants complete incl roots any dia, any masonary at any height. including applying root killer chemical as per manufacturer’s instructions and making good disturbed portion with PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) in CM 1:3 and finishing the surface to match with existing surface complete all as specified and directed. |
| 4 | De-watering from the existing service water tanks of capacity exc 250 ltrs and n.exc 500 ltrs kept over roof slab/staging of any height and cleaning internal surfaces of tanks to remove the deposited scales, dirt, mud and other foreign materials, rubbing with water using coir/jute brushes and washing the surfaces with fresh water, cleaning the inner surfaces with mixture of bleaching powder and water and finally washing with fresh water including taking down existing float valve and re-fixing the same in position after cleaning including writing TANK CLEANED ON (date) on the outer surface of tank complete all as specified and directed. |
| 5 | All as per item herein above but exceeding 500 ltr and not exceeding 1000 ltr in capacity complete all as specified and directed. |
| 6 | Taking down 15mm bore steel water tubing and connections complete all as specified and directed. |
| 7 | S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 8 | Taking down 20mm bore steel water tubing and connections complete all as specified and directed. |
| 9 | S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 10 | S&F in repairs 75 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 11 | S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 12 | S& F in repairs 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 13 | S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed. |
| 14 | S&F in repairs 200 mm long aluminium, anodised or matt finished barrel tower bolts of extruded section complete all as specified and directed. |
| 15 | S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and directed. |
| 16 | S&F in floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 17 | S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed. |
| 18 | Hacking out old unserviceable glass / broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds any thickness or size complete all as specified and directed. |
| 19 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 20 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 21 | S&F in 10 liters capacity PVC low level flushing cistern with ISI marked body, complete all as specified and directed. |
| 22 | S&F in repairs 100mm dia CP grating for nahani traps with or without hole for waste pipe complete all as specified and directed. |
| 23 | S&F in repairs 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 24 | S&F in repairs 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 25 | S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed. |
| 26 | S&F in repairs 15 mm bore, 45 cm long PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed. |
| 27 | S&F in repairs 15 mm bore, 60 cm long PTMT connecting pipe fitted with unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed. |
| 28 | S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 29 | S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with fancy type chromium plated for iron pipe or for unions angle cock complete all as specified and directed. |
| 30 | S&F in repairs 15 mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms/20mm-112gms) complete all as specified and directed. |
| 31 | S&F in repairs plastic water closet seat, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed. |
| 32 | S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed. |
| 33 | S&F in repairs for pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 34 | S&F in repairs 15 mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed. |
| 35 | S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated long body fancy type with capstan head, screwed down, screwed for iron pipe complete all as specified and directed. |
| 36 | S&F in repairs 15 mm bore bib taps, fancy type cast copper ally chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 37 | S&F in repairs 15 mm bore bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms) complete all as specified and directed. |
| 38 | S&F in repair 600 mm x450 mm beveiled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and washers complete all as specified and directed. |
| 39 | S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified and directed. |
| 40 | S&F in repairs 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 41 | S&F in repairs 15 mm bore Brass CP spindle with cap for mixer tap complete all as specified and directed. |
| 42 | M&L for taking down steel door/window shutter of any size and welded direction and refixing with provn of projection type hinges nos each welded each shuttes leaf and including making functional for easy opening and closing complete all as specified and directed. |
| 43 | Taking down shutters of any description any size complete all as specified and directed. |
| 44 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified and directed. |
| 45 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and directed. |
| 46 | S&F in stainless steel butt hinges, of size 100 mm complete all as specified and directed. |
| 47 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified and directed. |
| 48 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening complete all as specified and directed. |
| 49 | Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 50 | M&L machine cut Granite slab 18 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2:3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | M&L machine cut Granite slab 18 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2:3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender