Defence Statutory Bodies & Commissions/Committees Closing in 22 days TDR #56298162

Tender For Special Repair To Road Including Pathway From Madhuban Park To Tank Chowk (Manekshw Marg) In Sukna Mil Stn Under Ge Sukna

Issued by Statutory Bodies & Commissions/Committees · Darjeeling, West Bengal
Tender Value
6.98 Crore
Estimated cost
Bid Submission
31 Jul 2026
22 days left
EMD
6.74 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Road Including Pathway From Madhuban Park To Tank Chowk (Manekshw Marg) In Sukna Mil Stn Under Ge Sukna

BOQ

Name of Work:- SPECIAL REPAIR TO ROAD INCLUDING PATHWAY FROM MADHUBAN PARK TO TANK CHOWK (MANEKSHW MARG) IN SUKNA MIL STN UNDER GE SUKNA
Sl. No. Item Description
1Scarifying or picking graveled, macadam or bituminous macadam surfaces in area n.exc 400 Sqm but exc 50mm and n.exc 100mm deep complete all as specified and directed.
2M&L for 150mm (compacted thickness) WBM in two layers 75 mm thick each with coarse aggregrate of grading 2 (63 to 40mm size) or grading 3 (50 to 20 mm size), spread, rolled and consolidated to required gradient with 8-10 tonne power roller complete all as specified and directed.
3All as per Srl Item No. 2 here-in-above but except materials complete all as specified and directed.
4M&L Preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with cationic emulsion SS1 conforming to IS 8887 at a rate of application of 0.7-1 Kg /sqm on surface of WMM/WBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed.
5M&L Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 50mm or less) using asphalt sensor paver complete all as specified and directed.
6M&L Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat with cationic Bitumen emulsion (RS-1) conforming to IS 8887 at a rate of application of 0.2-0.3 Kg/sqm on bitumenious surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed.
7M&L for 40 mm thick bituminous premix asphaltic dense aspphaltic concrete with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete with sensor based mechanical pavers and rollers complete all as specified and directed.
8S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.
9S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions.
10S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed .
11Demolition of cement concrete (un-reinforced) of any description in any position not otherwise specifically provided for including removal of demolished materials from site complete all as specified and directed.
12M&L for PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
13M&L Brickwork with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed.
14Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and directed.
15M&L for providing plain cement concrete type C-1, (1:2:4), (using 12.5 mm graded crushed stone aggregate), as in copings, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
16M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for finished even and smooth (without using extra cement) complete all as specified and directed.
17M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains complete all as specified and directed.
18M&L for pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as cover slab for manhole and similar work etc set in CM (1:6) complete all as specified and directed.
19M&L for TMT Bar 10 mm dia and over mild steel ,cut to length, bent to shape required , including cranking ,bending spiraly for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as stirrups complete all as specified and directed.
20M&L for Hardcore of gauge not exceeding 63 mm, with broken stone and boulder, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.
21M&L for 75 mm thick PCC type C-2 (1:3:6) (using 40 mm graded crushed stone aggregate) as in as in sub base complete all as specifed and as directed.
22Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
23M & L for PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate as in copping and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
24Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
25M&L for applying two coats of synthetic enamel paint over one coat of primer on new plastered/ concrete surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.
26S&F PVC (SWR) pipe 110 mm bore laid in trenches or in floor.with rubber ring joins as in weep hole complete all as specified and directed.
27Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.
28M&L for plain cement concrete (1:3:6 ) type C-2 in foundations, filling and mass concrete in any position not otherwise specifically provided for complete all as specified and as directed.
29M&L for applying two coat of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation surface complete all as specified and directed.
30M&L for complete removal of old existing tretment including , washing, rubbing down and stopping of existing painting surfaces and appling two coats of cement base paint over one coat of primer complete all as specified and directed.
31M & L for thermoplastic road marking paint, white or golden yellow, conforming to BS-3262 applied on road/pavement as in lines, dashes, arrows, letters etc, exc 10 cm in width & of thickness not less than 2mm, with and including combination of retro-reflective glass beads 250-300 gm/ Sqm all as per manufacturer's instructions, using thermoplastic application unit etc, complete all as specified & directed.
32Taking down cat eyes complete all as specified and as directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56298162
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 6.98 Crore
LAST DATE 31-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Road Including Pathway From Madhuban Park To Tank Chowk (Manekshw Marg) In Sukna Mil Stn Under Ge Sukna
Basic Detail
Tender No 98846/SUK/SZ/E8
Bidding Type Tender
Location
City Darjeeling
State West Bengal
Key Dates
Publish Date 03 Jul 2026
Submission Date 31 Jul 2026
Open Date 07 Aug 2026
Finance
Tender Value 6.98 Crore
Tender Fee 3000
EMD 6.74 Lakhs
Exemption Available
Document List
8e245862-4a1f-4ca4-b855-2e412a553ea9.html
BOQ_869273.xls
Complete_Tender_Except_BOQ.pdf
Tendernotice_1 (2).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 31, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 22 days
Aug 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 29 days

Tender Documents

Download All (ZIP) ↓
html

8e245862-4a1f-4ca4-b855-2e412a553ea9.html

xls

BOQ_869273.xls

pdf

Complete_Tender_Except_BOQ.pdf

pdf

Tendernotice_1 (2).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders