Tender For Repair/ Maintenance Of Flooring, Wall Panelling, Joinery, Sanitary Fittings And Protective Works At Tangdhar Under The Aor Of Ge 874 Ews.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
18 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/ Maintenance Of Flooring, Wall Panelling, Joinery, Sanitary Fittings And Protective Works At Tangdhar Under The Aor Of Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 sqm complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm complete all as specified and directed. |
| 3 | Taking down of Shutters of any description n exc 1 sqm each complete all as specified and directed. |
| 4 | Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed. |
| 5 | Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each and re-fixing in the same opening after easing and adjusting with existing frame or chowkat complete all as specified and directed. |
| 6 | S&F second class Soft wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints and treating back of chowkhats etc with tar or coal black paint complete all as specified and directed. |
| 7 | S&F second class soft wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 8 | S&F Plain, framed, panelled shutters thickness 35 mm of second class softwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 9 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 10 | S&F Glazed and skeleton shutters thickness 30 mm, second class softwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(b) complete all as specified and directed. |
| 11 | S&F door closer hydraulically regulated cost iron body designation No 1 universal type suitable for door shutters up to 700 mm in width and of weight not more than 35 kgs complete all as specified and directed. |
| 12 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed complete all as specified and directed. |
| 13 | S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 14 | S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 15 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 16 | S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 17 | S&F Aluminium handles 100 mm, cast type, anodised complete all as specified and directed. |
| 18 | S&F Aluminium handles 150 mm, cast type, anodised complete all as specified and directed. |
| 19 | S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 20 | S&F in repairs rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkhat complete all as specified and directed. |
| 21 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. |
| 22 | M&L for preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 23 | M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic varnish complete all as specified and directed. |
| 24 | S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing sown in SSR Part II, complete all as specified and directed. |
| 25 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified. |
| 26 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc. complete all as specified and directed. |
| 27 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 28 | S & F Powder coated Anodized Aluminium window and ventilators shutters, without sash bar, aluminium section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, locking arrangement, handles etc complete all as specified and directed. |
| 29 | S&F Sheet glass 4 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and directed. |
| 30 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and directed. |
| 31 | S&F Sheet glass 3 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and directed. |
| 32 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 33 | Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 34 | M & L for plain cement concrete 1:4:8 type D-2 (40 mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 35 | M & L for plain cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 36 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 37 | M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded aggregate as in flooring complete all as specified and directed. . |
| 38 | M& L for 75 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base of flooring complete all as specified and directed. |
| 39 | M& L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement complete all as specified and directed. |
| 40 | Dismantling floor hearth wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and directed. |
| 41 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 42 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surface such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 43 | M & L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 44 | M & L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm on vertical surface such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 45 | M & L for glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick colour and design (as approved) set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 10 mm thick cement plaster in CM (1:4) complete all as specified and directed. |
| 46 | M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed bed in CM 1.6 complete all as specified and directed. |
| 47 | M&L for 18-20mm thick Granite (of any type) tiles machine cut, in skirting/dado over and including 10mm thick rendering in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 48 | Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering/wall and S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws complete all as specified and directed. |
| 49 | All as per item No 48 above but plain sheet. |
| 50 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 51 | S&F mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, for Fe-290 (Gde E-165) complete all as specified and directed. |
| 52 | S&F mild steel wors as in framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 53 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed. |
| 54 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 55 | S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc, including tank nipples, fittings, including dismantling of existing water tank any type, disposal of rubbish, complete all as specified and directed. |
| 56 | S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc, including tank nipples, fittings, including dismantling of existing water tank any type, disposal of rubbish, complete all as specified and directed. |
| 57 | S & F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 58 | S&F in repair Stop/angle valves 15 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle fancy type chromium plated, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 59 | S&F in repairs pillar taps, 15 mm dia cast copper alloy fancy type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe complete all as specified and directed. |
| 60 | S&F in repairs for 15 mm bore bib taps, fancy type chromium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule complete all as specified and directed. |
| 61 | S&F in repairs Vitreous China Urinal, Full stall type, white including flushing cistern, flush pipe and waste pipe complete all as specified and directed. |
| 62 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup complete all as specified and directed. |
| 63 | S&F in repair vitreous China wash basin, white flat back size 550x400 mm plug, porcelain stopper and including brackets with waste fittings, brass, chromium plated for glazed ware basin etc with long screwed shanks and fly-nuts, flange end bedded in read lead cement and other end fixed and connection pipe etc including pedestal complete all as specified and directed. |
| 64 | S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed. complete all as specified and directed. |
| 65 | S&F in repairs vitreous China wash down water closet pan (Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cover including provision of concrete/ white cementing and P or S trap complete all as specified and directed. |
| 66 | M&L in repair vitreous China wash down water closet pan (one piece type) ivory with PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and directed. |
| 67 | S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing complete all as specified and directed. |
| 68 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 mm long between flanges complete all as specified and directed. |
| 69 | S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard complete all as specified and directed. |
| 70 | S & F in repairs Brass CP wall mixer /WHB Mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 71 | S &F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc. complete all as specified and directed. |
| 72 | S&F in repairs CP health faucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 73 | Taking up or down 15mm bore steel water tubing and connections and S&F 15mm bore steel water tube, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 74 | Taking up or down 20mm bore steel water tubing and connections and S&F 20mm bore steel water tube, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 75 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 76 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floor or to wall complete all as specified and directed. |
| 77 | S&F PVC (SWR) junction single T equal or unequal 110 mm bore complete all as specified and directed. |
| 78 | S&F PVC (SWR) bends 110 mm dia fixed complete all as specified and directed. |
| 79 | S&F PVC (SWR) vent cowl 110 mm bore fixed complete all as specified and directed. |
| 80 | S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 81 | S&F PVC (SWR) junction single T equal or unequal 75 mm dia. complete all as specified and directed. |
| 82 | S&F PVC (SWR) bends 75 mm dia fixed complete all as specified and directed. |
| 83 | S&F PVC (SWR) vent cowl 75 mm bore fixed complete all as specified and directed. |
| 84 | Dismantling timber scantlings of unframed work 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 85 | All as per Ser Item No 84 above but as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position complete all as specified and directed. |
| 86 | S&F second class soft wood clean swan timber framed in scantling and fixed to the position complete all as specified and directed. |
| 87 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 13 sqcm but not exc 25 sqcm in section complete all as specified and directed. |
| 88 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 6 sqcm but not exc 13 sqcm in section complete all as specified and directed. |
| 89 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 90 | S&F Softwood 2nd class Clean sawn with butt joints Eaves boards 20 mm thick complete all as specified and directed. Please Enable Macros to View BoQ information |
| 91 | S&F Softwood 2nd class Clean sawn with butt joints Eaves boards 20 mm thick complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender