Tender For Special Repair Of Bldg No. P-334 Jco Mess Of The Sikh Li Regt Centre At Fatehgarh Cantt
Tender Value
53.58 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
21 days left
EMD
1.05 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
fatehgarh → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No. P-334 Jco Mess Of The Sikh Li Regt Centre At Fatehgarh Cantt
BOQ
| Sl. No. | Item Description |
| 1 | M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6 including demolition old brick work built in cement mortar or cement lime mortar complete all as specified and directed. |
| 2 | M&L for brick work (except bricks) with old size sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6 including demolition old brick work built in cement mortar or cement lime mortar complete all as specified and directed.Note : Serviceable bricks retrieved from demolition under Item No 1 & 2 shall be re-used |
| 3 | Taking down cement or cement lime plaster on brick or stone walls or concrete surfaces etc (any thickness) including raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish off the premises, complete all as specified and as directed |
| 4 | M & L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer's instructions) over interior surface of walls finished even & smooth (without using extra cement) and applying two coats of Oil Bound Distemper of approved shade over a coat of primer over & including 1mm thick wall care putty complete all as specified and directedNote - Coverage area of smart care ready mix plaster shall be 24-28 Kg/Sqm) |
| 5 | M & L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer's instructions) over exterior surface of walls finished even & smooth (without using extra cement) and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directedNote - Coverage area of smart care ready mix plaster shall be 24-28 Kg/Sqm) |
| 6 | M & L for rendering 5 mm thick in cement mortar 1:3 on concrete ceiling surfaces, finished even and smooth without using extra cement, including preperation of surfaces and applying three coats of whitewash, complete all as specified and directed. |
| 7 | M & L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing tiles, mortar bedding and rubbish off the premises, complete all as specified and directed. |
| 8 | M & L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiles, mortar bedding and rubbish off the premises, complete all as specified and directed. |
| 9 | M&L for glazed ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (i.e. 450 x 300 mm or 600 x 300 mm or as directed by Engineer-in-charge) on vertical surfaces such as dado, skirting, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar 1:4 including dismantling of existing tiles, cement mortar bedding and rubbish off the premises, complete all as specified and directed. |
| 10 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 11 | M&L for machine cut kota stone slab 18-20 mm thick laid in floors etc over & including 20mm thick screed bed or bedding layer in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing by machine complete all as specified and as directed |
| 12 | M&L for machine cut kota stone slab 18-20 mm thick as in riser/treads of steps (full length in single peice), skirting, dado, pillar & the like over & including 10mm thick rendering in cement mortar 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing by machine complete all as specified and as directed |
| 13 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over & including 20mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed |
| 14 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed |
| 15 | Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 16 | Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender