Tender For Solar High Mast Lights 4 Nos. (Four) At Boalmari Nandanpur G. P. Under Sadar Panchayat Samity, Sadar Block, Dist.-Jalpaiguri.(Pinpoint: List With Geo-Coordinates (Lat-Long) Enclosed Herewith As Per Annexure-A)
Tender Value
14.30 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
16 days left
EMD
28620
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Solar High Mast Lights 4 Nos. (Four) At Boalmari Nandanpur G. P. Under Sadar Panchayat Samity, Sadar Block, Dist.-Jalpaiguri.(Pinpoint: List With Geo-Coordinates (Lat-Long) Enclosed Herewith As Per Annexure-A)
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 10.5 mtr Ocatagonal GI Pole of approved make with hot dip Galvanized inside & outside, having pole shect thickness 3mm, top dia minimum 150 mm, bottom dia minimum 360 mm, base plate 500 mm x 500 mm x l6 mm, suitable for wind velocity as per IS 875 part 3 & having no circumſerential weld, with accessorics for high mast such as head framc suitable for 6 nos Solar Iuminaries, 6 nos Solar panels, arrangement of winch with hand pulley system with suitable metalic rope/ metalic ladder for maintanance purposc &6 nosFoundation Bolt 24Amm x 600mm. |
| 2 | Construction of RCC shallow foundation with base footing for erection of High Mast Tower by carth work in cxcavation of foundation trench approx zonc 1.2m X 1.2m X 1.Sm including removing spoils and neccssary trcaming the site of trench leveling, dressing and the bottom, bailling out water soil testing ctc. after that pickcd jhama bricks solling and dressing bed leveling and illing joints after that distribution 10mm TATA tor rod, proper size stirrups, binder ctc. and vertically MS tor rod 12 mm dia foundation not lcss than 8 nos. and levelling rod by 8 mm dia tor @I50 mm c/c spacing apart including binding with 16 SWG black anncals wire steel shurering and placement of not less than 5 nos (53 mm dia X 1200 mm Long) Foundation bolt with anchor plate of strength and ready mix concrete of M25 grade with graded stone chips 20 mm as per IS:10262 and IS: 456 (proportion 1:1:2) complete and water regidity next 7 days considering the safe soil bearing capacity of 10T/sqm. |
| 3 | Supply of Monocristaline solar panel with the following major specifications:Capacity: 12V 200Wr, Rated Power (Pmax)-[W]200.00, Raled Voltage (Vmax) - [v) 19.80, Rated Current (Imax)-(A) 114, Open Circuit Voltage (Voc) - [V]) 23.40, Short Circuit Current (Isc)-[AJ 12.05, Minimum Module ETiciency (0)- [S) 19. The SPV module shall be highle reliable, lightweight and shall have service life more than 25 years, the module shall have a limited power loss of not more than 10% of nominal output at the cnd of 10 years and not more than 20h at the end of 25 years. Environment Withstand Ability: The solar module shall be able to withstand the temperature extremes ranging from 40°C to +85°C and the wind load af wind speed a 1sOknhr. Maximem mean hour rainfall of 40mm, Humidity level up to 90%. Framing: The panel made up with h heficient cells should be made up robust anodized aluminium frame with m nting frame (M.S. may be required) with mounting holes, The strip must cont uin the following details-) Name of the manufacturer b) Model no, or Typc no. ) Serial no. d) Year of manufacturing etc.Make- BIS/ MNRE Approved |
| 4 | Supply & Delivery of 50W DC LED with minimum colour temperature (CC) 5500-6500K minimum typical luminous lux 150 LmW, i.c. minimum 3600 LM (Philips Osram equivalent reputed make with DIS certificate) having dic cast aluminium body with in-built Charge Controller & Driver suitable for Lithium Ferro Phosphate Battery with MPPT and eficiency > 929% and should have Battery over charge cut-of, Deep Discharge cut-olf, Short Circuit protection, Protection against Reverse Polarity, Load reconnect, Over heating. Automatic dusk to dawn controlling facilities & Dimmer arTangement are inbullt with the system. |
| 5 | Supply of 12.8 V 100 AH Lithium Ferro Phosphate Battery (LiFePO4) having BIS Certificate having Battery Management System (BMS) with higher life expectancy, longer cycle life, low discharge rate& fast charging facilities. Battery should provide 12 hours backup. Battery must be provided with GI Battery box/inbuilt in luminaries arrangement. |
| 6 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts, below the ground level & restoring surface duly rammed. |
| 7 | Cables and wiresa) DC Cable 4 sqmmb) Control Cable - LS |
| 8 | Installation and Commissioning |
| 9 | Transportation |
| 10 | Comprehensive maintenance for 05 years |
| 11 | Display Board |
| 12 | Sub Total |
| 13 | GST 18% |
| 14 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender