Tender For Vertical Extension Of Vrdl And Mru Buillding At Rims,Imphal.(Sh: Ms Frame Structure,Profile Sheet Roofing,Cement Fibre Board Wall,False Ceiling,Tiles Flooring, Sanitary & Water Supply And Finshing Item Etc)
Tender Value
83.70 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
4 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal East → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Vertical Extension Of Vrdl And Mru Buillding At Rims,Imphal.(Sh: Ms Frame Structure,Profile Sheet Roofing,Cement Fibre Board Wall,False Ceiling,Tiles Flooring, Sanitary & Water Supply And Finshing Item Etc)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing lime concrete manually/ by mechanical means anddisposal of material within 50 metres lead as per direction ofEngineer in charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Disposal of building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, includingloading, transporting, unloading to approved municipal dumpingground or as approved by Engineer-in-charge, beyond 50 m initiallead, for all leads including all lifts involved |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 5 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 6 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 7 | Thermo-Mechanically Treated bars |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : |
| 9 | 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Steelworkinbuiltuptubular(round,squareorrectangulartubesetc.)trussesetc.,includingcutting,hoistingfixinginpositionandapplyingaprimingcoatofapprovedsteelprimer,includingweldingandboltedincludingspecialshapedwashersetc.complete. |
| 11 | a 10:16:01 |
| 12 | Hot finished welded type tubes |
| 13 | Providing and fixing 9mm heavy duty cement fibre board on walls |
| 14 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with |
| 15 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 16 | Providing and fixing precoated galvanised steel sheet roofingaccessories , Zinc coating 120gsm as per IS: 277 in 240mpa steelgrade, 5-7 microns epoxy primer on both side of the sheet andpolyester top coat 15-18 microns using self drilling/ self tappingscrews or with polymer coated J or L hooks, bolts and nuts and orG.I. seam bolts and nuts, G.I. plain and bitumen washers complete : |
| 17 | a 12:47:01 |
| 18 | Ridges plain (500 - 600mm). |
| 19 | a 12.47.1.2 |
| 20 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 21 | Gutter (600 mm over all girth).12.47.6 |
| 22 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 23 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption’s less than 0.08% and conforming to IS : 15622 ofapproved make in all colours and shades, laid on 20mm thickcement mortar 1:4 (1 cement: 4 coarse sand) including groutingthe joints with white cement and matching pigments etc.,complete. |
| 24 | Size of Tile 600 x 600 mm |
| 25 | Providing and fixing 1st quality ceramic glazed wall tilesconforming to IS : 15622 (thickness to be specified by themanufacture of approved make in all colours, shades exceptburgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thickbed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointingwith grey cement slurry @ 3.3kg per sqm including pointing inwhite cement mixed with pigment of matching shade complete. |
| 26 | Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): |
| 27 | Forshuttersofdoors,windows&ventilatorsincludingprovidingandfixinghinges/pivotsandmakingprovisionforfixingoffittingswhereverrequiredincludingthecostofEPDMrubber/neoprenegasket required (Fittings shall be paid for separately). |
| 28 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 29 | Fillingthegapinbetweenaluminiumframe&adjacentRCC/Brick/StoneworkbyprovidingweathersiliconsealantoverbackerrodofapprovedqualityasperarchitecturaldrawingsanddirectionofEngineer-in-charge complete. |
| 30 | Providingandfixingglazinginaluminiumdoor,window,ventilatorshuttersandpartitionsetc.withEPDMrubber/neoprenegasketetc.completeasperthearchitecturaldrawingsandthedirectionsofengineer-in-charge.(Costofaluminiumsnapbeadingshallbepaid in basic item): |
| 31 | With float glass panes of 4.0 mm thickness |
| 32 | Providing and fixing tiled False Ceiling of approved materials ofsize 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanized @ 120 gsm/sqm, both side inclusive) consisting of main“T” runner with suitably spaced joints to get required length andof size 24x38mm made from 0.30mm thick (minimum) sheet,spaced at 1200mm center to center and cross “T” of size 24x25mmmade of 0.30mm thick (minimum) sheet, 1200mm long spacedbetween main “T” at 600mm center to center to form a grid of1200x600 mm and secondary cross “T” of length 600mm and size24x25mm made of 0.30 mm thick (minimum) sheet to beinterlocked at middle of the 1200x600mm panel to form grids of600x600mm and wall angle of size 21x21x0.3 mm and laying falseceiling tiles of approved texture in the grid including, requiredcutting/making, opening for services like diffusers, grills, lightfittings, fixtures, smoke detectors etc. Main “T” runners to besuspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dashfasteners, 4mm GI adjustable rods with galvanised butterfly levelclips of size 85 x 30 x 0.8 mm spaced at 1200mm center to centeralong main T, bottom exposed width of 24mm of all T-sectionsshall be pre-painted with polyester paint, all complete at allheights as per specifications, drawings and as directed by Engineer-in-Charge. (The rate is excluding the cost of tiles which will be paid |
| 33 | a 12:48:01 |
| 34 | GI Metal ceiling Lay in plain Tegular edge Global white color tiles of size 595 x 595 mm, and 0.5 mm thick with 8 mm drop, made of GI sheet having galvanizing of 100 gms/sqm( both sides inclusive) and electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 35 | Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A including jointing with sealring conforming to IS :5382 leaving 10 mm gap for thermalexpansion, (i) Single socketed pipes12.37.175 mm diameter |
| 36 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 37 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 38 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.43.1 Two or more coats on new work |
| 39 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 13.44.1 Two or more coats on new work |
| 40 | Providing and fixing white vitreous china pedestal type watercloset (European type) with seat and lid, 10 litre low level whitevitreous china flushing cistern & C.P. flush bend with fittings &C.I. brackets, 40 mm flush bend, overflow arrangement withspecials of standard make and mosquito proof coupling ofapproved municipal design complete, including painting offittings and brackets, cutting and making good the walls andfloors wherever required : |
| 41 | W.C. pan with ISI marked white solid plastic seat and lid. |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- |
| 43 | White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 45 | INTERNAL Concealed work, including cutting chases and making good the walls etc. |
| 46 | 20 mm nominal outer dia Pipes |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 48 | External work |
| 49 | 20 mm nominal outer dia Pipes |
| 50 | 25 mm nominal outer dia Pipes |
| 51 | 32 mm nominal outer dia Pipes |
| 52 | 40 mm nominal outer dia Pipes |
| 53 | Providing and fixing brass bib cock of approved quality. |
| 54 | 15 mm diameter (Ordinary) |
| 55 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 56 | 15 mm diameter |
| 57 | Providing and placing on terrace (at all floor levels) polyethylenewater storage tank, IS : 12701 marked, with cover and suitablelocking arrangement and making necessary holes for inlet, outletand overflow pipes but without fittings and the base support fortank. |
| 58 | 2000 litre |
| 59 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 60 | Flexible pipe |
| 61 | 32 mm dia |
| 62 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 63 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour |
| 64 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender