Tender For Re-Construction Of Na-Ii & N.A-I Qtrs, Special Repairs & Maintenance Work At Hazira Lighthouse & Dgps Station.
Tender Value
1.93 Crore
Estimated cost
Bid Submission
27 Jul 2026
20 days left
EMD
3.86 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surat → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Re-Construction Of Na-Ii & N.A-I Qtrs, Special Repairs & Maintenance Work At Hazira Lighthouse & Dgps Station.
BOQ
| Sl. No. | Item Description |
| 1 | A) Dismantling/ Demolishing-Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 2 | Dismantling of unserviceable/ damaged Wash Basin of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including supply of all labours, tools and plants, finishing etc. complete as directed by the engineer in charge. |
| 3 | Dismantling of unserviceable/damaged IWC/EWC pan of all sizes including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead including supply of all labours, tools and plants, finishing etc. Complete as directed by the engineer in charge. |
| 4 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge: (15 mm to 40 mm nominal bore) |
| 5 | Demolishing nominal cement concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 6 | Dismantling tile work for thickness of tiles 10 mm to 25 mm in floors, walls and roofs laid in cement mortar including stacking material within 50 metres lead including supply of all labours, tools and plants, finishing etc. Complete as directed by the engineer in charge. |
| 7 | Dismantling aluminium/ Gypsum partitions,wall panelling, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 8 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. |
| 9 | Demolishing brick work / stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - InCement-mortar- as per direction of Engineer-in-charge |
| 10 | Dismantling steel work in built up sections (main gate and tower plinth hand rail) in angles, tees, flats,pipe and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete as directed by the engineer in charge |
| 11 | B) SPRM & New Construction-Chipping of unsound/weak concrete material from slabs, beams, columns, staircase waist slab of Lighthouse tower etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 12 | 25 mm average thickness |
| 13 | Cleaning of reinforcement from rust from the reinforcing bars above 12 mm diameter to give it a total rust free steel surface by using alkaline chemical rust remover of approved maker (Roff / Fosroc/ Basf ) with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 14 | Providing, mixing and applyingSBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer of approved maker(Roff/Weber saint gobin/Basf/ Fosroc) on chipped portion of RCC/plaster surfaces as per specifications and direction of Engineer-In-charge. |
| 15 | Providing, mixing and applying 25 mm average thickness in 2 layers, SBR polymer (Roff/Weber saint gobin/Basf/ Fosroc) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument) |
| 16 | Supplying, Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification of (Roff/Weber saint gobin/Basf/ Fosroc including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge. |
| 17 | Providing and laying cement concrete in coping with 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including the cost of centering, shuttering and finishing as required or as directed including supply of all materials, tools, labours etc. complete as directed by the engineer in charge. |
| 18 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m., as directed by Engineer-in-charge Hard rock (blasting prohibited) |
| 19 | Filling available/ malba in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift. |
| 20 | Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge |
| 21 | Providing and laying 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, complete as per the direction of Engineer-in-charge. |
| 22 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge |
| 23 | C) Re-Construction/Masonry & R.C.C Work-Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all work up to plinth level,1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources complete as directed by the engineer in charge |
| 24 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth level up to floor V level in all shapes and sizes, complete as directed by the engineer in charge |
| 25 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)including supply of all materials, tools, labours etc. complete as directed by the engineer in charge |
| 26 | Lintels, beams, plinth beams, roof beam, parapet wall, |
| 27 | Chajjas, Cupboards etc., including Loft slab |
| 28 | RCC slab |
| 29 | Providing and laying in position, Centering and shuttering including strutting, propping etc. and removal of form including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge. |
| 30 | Foundations, footings, bases of columns, etc. for mass concrete |
| 31 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 32 | Lintels, beams, plinth beams, girders, bressumers and cantilever |
| 33 | Weather shade, Chajjas, corbels etc., including edges |
| 34 | Suspended floors, roofs, landings, balconies and access platform |
| 35 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses |
| 36 | Supply, fabrication, hoisting and placing in position Thermo-Mechanically Treated bars of grade Fe-500D or more of approved brand (SAIL / TATA TISCO/ JSW) as per detailed drawing and specifications including cutting, bending and tying with 18 SWG binding wire complete for all heights and depths as directed etc. complete including supply of all labours, tools, materials etc. complete as directed by the engineer in charge.(Placed Measurement weight qty |
| 37 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.including supply of all labours, tools and plants, materials and finishing etc. complete as directed by the engineer in charge. |
| 38 | Construction of masonry Septic tank of 5 user capacity as per standard design drawing No. B/1831 (inside size 1.50 x 0.75 m and 1 m deep with RCC Top Slab & precast manhole cover, necessary excavation, rubble soling, bed concrete with 1:4:8, Precast baffle wall, brick masonry in cement mortar 1 : 5 (1 cement : 5 coarse sand), 20 mm thick inside cement plaster in cement mortar 1 : 4 (1 cement : 4 coarse sand), vent pipe etc., including supply of all materials, labours, tools & plants, etc. complete as directed by engineer in charge. |
| 39 | Constructing brick masonry gully chamber 50x45x60 cm with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design etc. complete including supply of all materials, labours, tools & plants, etc. as directed by engineer in charge. |
| 40 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard drawing. including supply of all labours, tools and plants, materials and finishing etc. complete as directed by the engineer in charge. |
| 41 | Providing and fixing 100x100 mm size P type square-mouth S.W. gully trap With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design etc. complete as directed by the engineer in charge. |
| 42 | D) Granite/Plaster/Tiles Work-Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite of black colour and shade for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete including supply of all labours, tools, materials, rubbing and polishing and finishing etc. complete as directed by the engineer in charge. |
| 43 | Making/providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete as directed by the engineer in charge. |
| 44 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing PVC concealed wiring pipe etc. including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. (Electric conduits pipes will be Fixed by department). |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 46 | Providing and fixing white vitreous china water closet squatting pan (indian type) : Orissa pattern W.C. pan of size 580x440mm (Jaquar / Parryware/ Hindware/Cera) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-incharge. |
| 47 | Providing and fixing One urinal basin with 5 litre white P.V.C. automatic flushing cistern white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete (Jaquar / Parryware/ Hindware/Cera), including painting of fittings and brackets, cutting and making good the walls and floors wherever required as directed by engineer-in-charge |
| 48 | Providing and fixing Stainless Steel AISI 304 (18/8) Kitchen sink with drain board as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, (Nirali/ Prestige/ Jindal) including painting of fittings and brackets, cutting and making good the walls wherever required: (510x1040 mm bowl depth 250 mm) including supply of all labours, tools and plants, materials and finishing etc. complete as directed by the engineer in charge.. |
| 49 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x40 mm with a pair of 15 mm C.P. brass pillar tapes (Jaquar / Parryware/ Hindware/Cera), with C.I. brackets including painting of fittings and brackets, cutting and making good the walls wherever required including supply of all labours, materials, tools etc. complete as directed by the engineer in charge. |
| 50 | 12 mm thick Cement Plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level, including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80 mm in girth and finished even and smooth in CM 1:4 (1 cement: 4 coarse sand) including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 51 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge including providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers of approved make (Roff / Fosroc/ Basf/Weber saint gobin), etc. complete as directed by the engineer in charge.(upto height of 10 m from ground level) as per direction of Engineer-in-Charge |
| 52 | Providing drip mouding 50mm wide plaster drip course/ groove in plastered surface or moulding to R.C.C. projections such as for chajjas, slab projections as and wherever directed with cement mortar 1:2 ( 1 Cement : 2 coarse sand) including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 53 | 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge. |
| 54 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Kajaria/Somany/Jhonson) of premium Quality, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 55 | Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm |
| 56 | Double charge vitrified tile polished finish of size of Tile 600 x 600 mm |
| 57 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), (Kajaria/Somany/Jhonson) in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as directed by the engineer in charge. |
| 58 | Providing and fixing Three track three panels sliding window with fly proof SS wire mesh (Twonos. glazed with 5 mm thick float glass & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension, factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall andnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all completeas per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. |
| 59 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer (Asian/Berger/indigo) etc. including supply of all materials, labours, tools & plants etc. complete as directed by engineer in charge. (Fixed to openings /wooden frames with rawl plugs screws etc.) |
| 60 | Providing and fixing stainless steel ( Grade 304-1500-1900-40S, Stainless Steel Pipe -Type 304 Schedule 40S) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. |
| 61 | E) Carpentry works/ General repair work-Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, withnuts and screws etc. complete as per the direction of the Engineer-in-charge |
| 62 | Filling the gap Upto 5 mm depth and 5 mm width in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer- in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 |
| 63 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.complete as per direction of Engineer-in-charge. |
| 64 | Providing and fixing 25 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws etc. including supply of all labours, tools, materials, rubbing and polishing and finishing etc. complete as directed by the engineer in charge. |
| 65 | Providing and fixing ISI marked flush door shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete as directed by the engineer in charge. |
| 66 | Providing and fixing Single rubber stopper aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 67 | Providing and fixing 300x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, withnecessary screws etc. complete |
| 68 | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 69 | Providing and fixing special quality chromium plated brass cupboard locks size 75 mmwith six levers of approved quality including necessary screws etc. complete |
| 70 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 71 | Replacement of unserviceable/ damaged/ broken fittings of doors, windows, Ventilators, Cupboards shutters and as wherever directed with new S.S. fittings (Heavy duty) of (Dorset/Europa/Kich/Quba) fitted with brass screws, including removing old fitting and replacing new fittings of approved quality I.S.I. mark heavy duty including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. |
| 72 | M.S. sliding door bolts 300x16 mm |
| 73 | 125 mm brass door handle |
| 74 | brass hard drawn hooks and eyes 150 mm |
| 75 | aluminium tower bolts 150x10 mm |
| 76 | aluminium tower bolts 100x10 mm |
| 77 | brass butt hinges 75x65x4 mm (heavy type) |
| 78 | brass butt hinges 100x70x4 mm (ordinary type) |
| 79 | Repairs to furniture including replacement of broken/damaged members, with approved quality salwood joints properly as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. |
| 80 | Chair (repairing of legs/ arms) |
| 81 | Wooden Coats (Replacement of plywood) |
| 82 | Dinning Table (Replacement of sunmica top) |
| 83 | Meat safe (Replace of Nylon mesh) |
| 84 | Polishing with Touch wood of approved brand (Asian/Indigo/Berger) on previously polished wood & wood based surfaces to give an even surface after thoroughly brushing the surface with sand paper, scrappers to remove all dirt’s, spots, loose pieces of scales, cleaning, preparing the surface and filling the holes by with wood filler etc. wherever required including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. |
| 85 | Chair (Dining, Office etc.) |
| 86 | Coats |
| 87 | Dinning Table |
| 88 | Easy Chair with arms |
| 89 | Meat safe |
| 90 | Table (Office, Working, Writing) |
| 91 | Tea poy |
| 92 | Cup boad shutter with frame work |
| 93 | Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. including supply of all labours, materials, tools etc. complete as directed by the engineer in charge. |
| 94 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved (Dorset/Europa/Kich/Quba) and colour including supply of all labours, materials, tools etc. complete as directed by the engineer in charge. (600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms) including supply of all labours, tools and plants, materials and finishing etc. complete as directed by the engineer in charge. |
| 95 | Providing and fixing Chromium Plated brass Napkin Holder of approved (Dorset/Europa/Kich/Quba), ISI mark and quality with C.P. brass brackets fixed to tiles wall with wooden plugs & C.P. Brass Screws near wash basin etc. including supply of all labours, materials, tools etc. complete as directed by the engineer in charge. |
| 96 | Providing and fixing PTMT soap Dish Holder of approved (Dorset/Europa/Kich/Quba) ISI mark and quality having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. etc. including supply of all labours, materials, tools etc. complete as directed by the engineer in charge. |
| 97 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,including supply of all labours, tools and plants, materials and finishing etc. complete as directed by the engineer in charge. |
| 98 | Providing and fixing Chromium Plated brass curtain rods of 25 mm diameter & 1.25 mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. of (Dorset/Europa/Kich/Quba) wherever necessary etc. including supply of all labours, materials, tools etc. complete as directed by the engineer in charge. |
| 99 | Providing, Supplying and fixing in position tapestry Cloth Curtain with CP Pipe hanging and rolling movement made up of approved quality, make and shade including supply of all materials, fixtures & fittings, tools and plants, labour etc. complete in all respect as per the instructions of the engineer-incharge. |
| 100 | Providing and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including fixing panels in float glass panes (Saint Gobain glass) of 5.50 mm and 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll,with Aluminium snap beading , C.P. brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 101 | For Partition wall, AL section (63.50X38.10X3.18 mm) with panel size 1X 1 M |
| 102 | For Door shutters, AL section (63.50X38.10X3.18 mm) with panel size 1X 1 M |
| 103 | Providing and fixing Kiln seasoned and chemically treated hollock wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete |
| 104 | Providing and fixing 12 mm thick in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete |
| 105 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help ofdry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 106 | Providing and fixing Main Gate with G.I. Pipe ‘C’ class and M.S. flats & plates of size 3.70 m x 2.00 m as Per drawing no. MUM/59/2022 and as directed including cost of fabrication, transportation, fixing in position, fixing the rails etc. including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge. |
| 107 | Providing, Supplying and fixing of Lighthouse/ Department name board in black granite plate of size 70 cm x 140 cm (2' x 5') with engraving letters (in three languages - Local language of state, Hindi and English) of approved size with golden colour in granite plate as per drawing no. B/3006 and as directed, including cost of all materials, Tools & Plants, labour charges, fixed in position and finishing etc. complete as directed by the engineer in charge. |
| 108 | Providing, Supplying and fixing Department emblem in granite plate of size 90 cm x 120 cm (3' x 4') engraving the emblem and letters of approved size with golden colour in granite plate as per drawing no. B/3005 and as directed, including cost of all materials, Tools & Plants, labour charges, fixed in position and finishing etc. complete as directed by the engineer in charge. |
| 109 | (F) RCC WATER TANK & WATER SUPPLY SYSTEM-Providing and fixing G.I. pipes 40 mm dia B - Class, nominal bore complete with G.I. fittings of (TATA/Jindal/Zenith) including trenching and refilling etc complete as per direction of Engineer in Charge (External work) |
| 110 | Providing and fixing 40 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer in Charge (External work) |
| 111 | Providing and fixing Horizontal 40 mm nominal bore gun metal non- return valve of approved quality (screwed end) as per direction of Engineer in Charge (External work) |
| 112 | Providing and fixing 0.80 mm thick with zinc coating not less than 275 gm/m²,15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete |
| 113 | Providing and fixing on wall face unplasticised Rigid PVC pipes of (Prince/Finolex/Astral) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes, 110 mm diameter as per directions of the Engineer-In-Charge(Rainwater/west pipe,under road for cable and drainage.) |
| 114 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 115 | 110 MM Single pushfit Coupler |
| 116 | 110x110x110 mm Single tee with door |
| 117 | 110x110x110 mm Single tee without door |
| 118 | 110 mm Bend 87.5° |
| 119 | Providing, Supplying, Installation,commissioning & testing of 1 HP Submersible Pump of reputed make (Kirloskar/ Crompton Greaves/ Texmo) having ISI marked, suitable for minimum 135 metre head, energy effieient, Noiseless Operation, NRV in outlet, Stainless steel shaft and coupling, Stainless steel NRV body and suction housing, etc. including supply of all materials, labours, tools and plants, etc. complete as directed by engineer in charge. |
| 120 | Providing, Supplying and Installation of Polyethylene Water Storage Tank two Layered of (Sintex/ National/INFRA) ISI : 12701 marked, with cover and suitable locking arrangement on terrace (at all floor levels) with supporting the whole bottom area of the tank on durable, rigid and level platform, making inlet, outlet, overflow and scour connection, G.I nipples, uPVC Tank connector, nipples and cost of jointing material etc. complete as per specification and including cost of all materials, labours, tools & plats, loading, unloading, transportation etc. complete as directed by engineer in charge. |
| 121 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Astral/Prince/Finolex) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 122 | 15 mm nominal outer dia Pipes (Concealed work) |
| 123 | 20 mm nominal outer dia Pipes (Concealed work) |
| 124 | 25 mm nominal outer dia Pipes (Concealed work) |
| 125 | 32 mm nominal outer dia Pipes (Concealed work) |
| 126 | 40 mm dia (Internal work - Exposed on wall) |
| 127 | Providing and fixing C.P. Brass Water Supply fittings and specials of approved quality (Jaguar/Parryware/Cera/Hindware)of ISI make as per the following items including supply of all labour, materials, tools and plants etc. complete as directed by engineer in charge. |
| 128 | 15 mm nominal bore C.P. Brass Bib cock (long/short/swan neck body) |
| 129 | 15 mm nominal bore C.P. Brass Stop cock (concealed) |
| 130 | 15 mm nominal bore C.P. Brass Angle valve for basin mixer and geyser |
| 131 | 100 mm dia. shower rose with 15 or 20 mm inlet |
| 132 | PTMT waste Coupling for wash basin & sink (38 mm dia, 83 mm length & 77mm breadth) |
| 133 | 40 mm dia Semi rigid PVC waste pipe for sink or wash basin including P.V.C. waste fittings |
| 134 | 25 mm diameter mosquito proof coupling |
| 135 | Single lever telephonic wall mixer (Heavy duty) |
| 136 | 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate |
| 137 | 32mm CP Brass Bottle Trap |
| 138 | Flush Cock (Heavy duty) |
| 139 | 25 mm dia CPVC Valve |
| 140 | 32 mm dia CPVC Valve |
| 141 | 40 mm dia CPVC Valve |
| 142 | 15 mm dia Lead flexible Pipe for Geycer. |
| 143 | (G) ROAD WORK & PARKING SHED-Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared all complete as per the direction of Engineer-In-Charge. |
| 144 | Providing and laying cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)as base courese for cement concrete road excluding centering and shuttering & including the cost of all materials , labours ,tools & plants etc. etc. complete as directed by the engineer in charge. |
| 145 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete (test cerificate for M30 from the manufacture is required) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 146 | Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. complete all as per direction of Engineer-in- Charge. |
| 147 | Finishing with Epoxy paint (two or more coats) at all locations for Kerb stone and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete as per the direction of Engineer-in-charge. |
| 148 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. in Hot finished welded type tubes, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including supply of all labour tools materials etc all complete as per direction of Engineer-in-Charge |
| 149 | Providing & fixing UV stabilised 2 mm thick flat fiberglass reinforced plastic sheet roofing, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified including supply of all labour tools materials etc all complete as per direction of Engineer-in-Charge |
| 150 | H) Finishing Work-Removing dry or oil bound distemper,Synthetic Enamel paint, water proofing cement paint etc from interior and exterior wall surfaces of lighthouse tower by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc including supply of all labour tools materials etc all complete as per direction of Engineer-in-Charge |
| 151 | Removing white or colour wash, dietemper, cement paimt etc by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches, supply of all labour tools materials etc all complete as per direction of Engineer-in-Charge |
| 152 | Providing and applying white cement based putty of average thickness 1 mm to interior surfaces of lighthouse tower of approved brand and manufacture (Asian/Burger/Indigo/ Opus Birla), over the plastered wall surface to prepare the surface even and smooth complete including supply of all labour tools materials etc all complete as per direction of Engineer-in-Charge |
| 153 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 154 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over existing cement paint surface including supply of all materials, labours, tools, scaffoldings etc. complete as directed by the engineer in charge. |
| 155 | Finishing with Epoxy paint (Asian/Burger/Indigo/ Opus Birla) two or more coats on steel and Wooden work at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete including supply of all materials, labours, tools, scaffoldings etc. complete as directed by the engineer in charge. |
| 156 | Painting with synthetic enamel paint to lighthouse tower surfaces interior and exterior in two or more coat on old surfaces, an under coat of synthetic primer, of suitable shade with ordinary paint of approved brand and manufacture (Asian/Burger/Indigo/ Opus Birla) of required colour to give an even shade including supply of all labour tools materials etc all complete as per direction of Engineer-in-Charge |
| 157 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materialsby mechanical means, including loading, transporting, unloading with in lighthouse premises (for backfilling under floor filling) or to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 158 | Recovery of salvage value/scrap value of recovered reinforncement steel at the time of dismantaling of the above said structure (RCC slab) including cost of transport from the site but excluding the cost of dismantaling labours ,tools material etc. complete |
| 159 | RCC (steel)/ STEEL |
| 160 | Doors with frame |
| 161 | windows/Vent with frame Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender