Tender For Construction Of cement concrete Pavements In And Around The Pg Gents Hostel C Us, Marble Stone Flooring Of Stair Case, Cgi Sheet Roofing For The Pg Gents Hostel No 1(Kheba), Rims, Imphal.
Tender Value
21.53 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
9 days left
EMD
43079
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal West → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of cement concrete Pavements In And Around The Pg Gents Hostel C Us, Marble Stone Flooring Of Stair Case, Cgi Sheet Roofing For The Pg Gents Hostel No 1(Kheba), Rims, Imphal.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering --All work upto plinth level: |
| 2 | c). 1: 4: 8 ( 1cem: 4 c/sand : 8 graded stone aggrt. 20 mm nominal size ) |
| 3 | c). 1: 3: 6 ( 1cem: 3 c/sand : 6 graded stone aggrt. 20 mm nominal size ) |
| 4 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with |
| 5 | Agaria White |
| 6 | Extra for prefinished nosing to tread of steps of marble stones. |
| 7 | Steel work in built up tubular ( round, square or rectanglar hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats synthetic enamel paint including welding and bolted with special shaped washers etc. complete. |
| 8 | Electric Resistant Welded tube (Conforming to IS:1611-1979) |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy rimer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with |
| 10 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 11 | Providing and fixing precoated galvanised steel sheet roofingaccessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : |
| 12 | Ridges plain (500 - 600mm) |
| 13 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 14 | 52 mm thick cement concrete flooring with concrete hardenertopping under layer 40 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) and top layer 12 mm thick cement hardenerconsisting of mix 1:2 (1 cement hardener mix : 2 graded stoneaggregate 6 mm nominal size) by volume .hardening compound ismixed @ 2 litre per 50kg of cement or as per manufacturersspecifications. This includes cost of cement slurry, but excludingthe cost of nosing of steps etc. complete. |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 16 | External Work |
| 17 | 25 mm nominal outer dia Pipes |
| 18 | Providing and fixing brass stop cock of approved quality |
| 19 | 20mm nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender