Tender For Providing And Fixing Of Students Bench And Desk For Gf With Steel Frame And Mdf Board And Parapet Wall And Window Grill For The Newly Constructed Classroom, Rims, Imphal
Tender Value
66.52 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
7 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal West → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Students Bench And Desk For Gf With Steel Frame And Mdf Board And Parapet Wall And Window Grill For The Newly Constructed Classroom, Rims, Imphal
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge. |
| 2 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required |
| 3 | In grating, frames, guard bar, railing, brackets, gates and similar works. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering |
| 5 | 1:1.5:3 ( 1 Cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 6 | Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). |
| 7 | Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 |
| 8 | Providing and fixing 25 mm thick shutters for cup board etc |
| 9 | Ist class teak wood including ISI marked anodised aluminium butt hinges with necessary screws |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: |
| 11 | Two or more coats on new work |
| 12 | Varnishing with varnish of approved brand and manufacture: |
| 13 | Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. |
| 14 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead |
| 15 | For thickness of tiles above 10 mm and upto 25 m |
| 16 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in |
| 17 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 18 | 12 mm cement plaster of mix: |
| 19 | 1:4 (1 cement : 4 fine sand) |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 21 | 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 23 | Size of Tile 600 x 600 mm |
| 24 | Providing and fixing bolts including nuts and washers complete |
| 25 | M12 x 40 |
| 26 | Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily. |
| 27 | Double charge vitrified tile polished finish of size |
| 28 | Size of Tile 600 x 600 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender