Tender For Proposed Construction Of Chowkidar Qtrs At Water Supply Near Paediatric Dept, Rims, Imphal. (S.H:- Dismantling & Demolition Work Of Old Structure, Earthwork, Plain Cement Concrete Work, Reinforced Cement Concrete Work, Brick Work, Steel Wo
Tender Value
22.07 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
9 days left
EMD
44146
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal West → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Construction Of Chowkidar Qtrs At Water Supply Near Paediatric Dept, Rims, Imphal. (S.H:- Dismantling & Demolition Work Of Old Structure, Earthwork, Plain Cement Concrete Work, Reinforced Cement Concrete Work, Brick Work, Steel Work, Roofing Work, Finishing Work, Sanitary Work, Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 2 | Of area 3 sq. metres and below |
| 3 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 4 | Of area 3 sq. metre and below |
| 5 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : |
| 6 | Of sectional area 40 square centimetres and above. |
| 7 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 8 | G.S. Sheet |
| 9 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-incharge. |
| 10 | In Cement mortar |
| 11 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 12 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 13 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 14 | All kinds of soil. |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre |
| 16 | Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete. |
| 17 | Earth work in rough excavation banking excavated earth in layer not exceeding 20cm depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammer rolling every third and topmost layer with power roller of minimum 8 tonne and dressing up embankment for roads, floods banks guide banks and filling up ground, depression lead upto 50 metres and lift upto 1.5 m in |
| 18 | Hard/Dense Soil. |
| 19 | Construction of granular sub-base by crusher run, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 20 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in |
| 21 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 22 | 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) |
| 23 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 25 | Foundations, footings, bases of columns, etc. for mass concrete |
| 26 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 27 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 28 | Suspended floors, roofs, landings, balconies and access platform |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
| 30 | Thermo-Mechanically Treated bars |
| 31 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 32 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 33 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement : |
| 34 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 35 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with |
| 36 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 37 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 38 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 39 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 40 | Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 41 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 42 | 1:3 ( 1 cement : 3 fine sand) |
| 43 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 44 | 1:4 (1 cement: 4 coarse sand) |
| 45 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : |
| 46 | Local best quality Tolhao wood. |
| 47 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 48 | Local best quality Tolhaowood |
| 49 | 30 mm thick shutters |
| 50 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) panelling for panelled or panelled anf glazed shutters 25mm to 40mm thick. |
| 51 | Local best quality Tolhao wood |
| 52 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 53 | 100x58x1.90 mm |
| 54 | Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete |
| 55 | 250x16 mm |
| 56 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 57 | 250x10 mm |
| 58 | Providing and fixing ISI marked oxidised M.S. handles conformingto IS:4992 with necessary screws etc. complete : |
| 59 | 125 mm |
| 60 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. |
| 61 | Electric resistance or induction butt welded tubes. |
| 62 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)with zinc coating 120 grams per sqm as per IS: 277, in 240 mpasteel grade, 5-7 microns epoxy primer on both side of the sheetand polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto12 metre or as desired by Engineer-in charge. The sheet shall befixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with |
| 63 | Precoated galvanised iron profile sheets 0.50 mm thick |
| 64 | Providing and fixing precoated galvanised steel sheet roofingaccessories , Zinc coating 120gsm as per IS: 277 in 240mpa steelgrade, 5-7 microns epoxy primer on both side of the sheet andpolyester top coat 15-18 microns using self drilling/ self tappingscrews or with polymer coated J or L hooks, bolts and nuts and orG.I. seam bolts and nuts, G.I. plain and bitumen washers complete : |
| 65 | Ridges plain (500 - 600mm). |
| 66 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 67 | Gutter (600 mm over all girth). |
| 68 | Precoated galvanised iron profile sheets 0.40 mm thick |
| 69 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 70 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 71 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. |
| 72 | With water thinnable cement primer on wall surface having VOCcontent less than 50 grams/litre |
| 73 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 74 | New work(two or more coats)over and including priming coat with cement primer:- |
| 75 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content |
| 76 | With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre |
| 77 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content |
| 78 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 79 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: |
| 80 | Two or more coats on new work |
| 81 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 82 | White Vitreous china Orissa pattern W.C. pan of size 580 x 440mm with integral type foot rests |
| 83 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 84 | White Vitreous China Flat back wash basin size 450x 300 mmwith single 15mm C.P. brass pillar tap |
| 85 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 86 | Kitchen sink with drain board |
| 87 | 510x1040 mm bowl depth 250 mm |
| 88 | Providing and fixing C.P. brass stop cock (concealed) of standarddesign and of approved make conforming to IS:8931. |
| 89 | 15 mm nominal bore |
| 90 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 91 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 92 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 94 | Internal work - Exposed on wall |
| 95 | 32 mm nominal outer dia Pipes |
| 96 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 97 | External work |
| 98 | 32 mm nominal outer dia Pipes |
| 99 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge |
| 100 | 110 mm dia |
| 101 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 102 | CREDIT FOR RECOVERED MATERIAL |
| 103 | GS Sheet (Unserviceable) |
| 104 | Timber (Unserviceable/can be treated as firewood) |
| 105 | Brick Semi Serviceable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender