Tender For Mw To Structural Conservation And Preventive Tubular Framed Jali To The Interior Of Bhogamandapa At Shree Jagannath Temple, Puri
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Jul 2026
4 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mw To Structural Conservation And Preventive Tubular Framed Jali To The Interior Of Bhogamandapa At Shree Jagannath Temple, Puri
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m center to center, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challis, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .Note: (1) The elevational area of the scaffolding shall be measured for payment purpose .(2)The payment will be made once only for execution of all items for such works. |
| 2 | Providing and fixing wooden plank heavy rigid platform at various stages scaffolding for smooth execution of inspection work and conservation work with all complete as per direction of Engineer In charge |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 square centimetres and above. |
| 4 | Dismantling fixed wire mesh upto 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimeters and above |
| 5 | Carefully taking out the old plaster by hammering and chiseling with proper dressing and cleaning the stone wall surface of bhogamandapa including disposal of rubbish to the 50 metres lead outside the temple premises. . |
| 6 | Raking out joints of stone masonry surface to the required width and depth with due care and precaution by mechanical/manual means, including preparing and cleaning the surface for re-pointing /refilling of joints, including disposal of rubbish to the dumping ground within 50 mtr. Lead etc., complete as directed by the Engineer in-charge of work |
| 7 | Pointing of joints with polymer modified Cementious (PMC) joint sealant with 8% polymer loading .The sealant mix should be Ordinary Portland cement (OPC) , khandolite stone dust and acrylic based polymer emulsion in the ratio of 1:2.2 by weight appropriate dose of Non shrink compound .The solid resin content in the acrylic based resin emulsion should be minimum of 40 %. |
| 8 | Provision for drilling holes of 18mm dia up to 400 mm depth and fixing nozzles for PMC grout to the inner chamber for filling the gaps and voids. |
| 9 | Provision for PMC grouting with emulation added with ordinary Portland cement one part having polymer loading 10% with appropriate dose non shrink powder 0.05 part Cebex and plasticizer 0.056 part having pressure up to 0.2 kg to 0.5 kg per square centimetre. |
| 10 | Core drilling and fixing of 20 mm dia S.S threaded bar of 450mm 304 L grade after drilling with 25 mm dia drilling bit through existing stone masonary and thoroughly cleaning the same following proper method (Air blow, Brush) & finally 20mm dia SS bar (HIT-V-R-M20X 380 RE10 or HILTI or equivalent.) to be fixed and bolt should be fixed with high performance injectable stone adhesive for proper filling of void [Cost includes charges of required manpower and materials, excluding the cost of scaffoldings] |
| 11 | Providing and fixing SS (Grade 304 ) made of hallow tubes,channels,plates etc including welding, grinding, buffing, polishing and fitting the same curvature (wherever required ) and fitting the same with necessary stainless steel nots and bolts complete i/c fixing the gate with necessary accessories & stainless steel dash fastener, stainless steel bolt etc. of required size on the top floor or the side of waist slab with suitable arrangement as per the approval of Engineer in charger ( For payment purpose only weight of stainless steel member and the bolt more than 100 gm shall be considered excluding fixing accessories such as nut, bolt, fasteners etc. |
| 12 | Providing and fixing stainless steel Wire mesh(304 Grade) 3 mm dia wire and 25MM X 25MM aperture in both side with MS SS 25 x3mm nut and bolt complete as per direction of Engineer -in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender