Tender For Providing Ten Iron Dustbin Cages In The Ngri Colony At Ngri, Hyderabad
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Jul 2026
1 days left
EMD
24500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Ten Iron Dustbin Cages In The Ngri Colony At Ngri, Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Earth work in excavation by All kinds of soil mechanical means (Hydraulic excavator)/manual means over areas including WBM ,soiling etc.and disposal of material inside NGRI campus along the compound wall and disposed earth to be levelled and neatly dressed , as directed by Engineer-in-charge. |
| 3 | Providing and laying in position 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size cement Concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | Steel reinforcement for R.C.C. work including Thermo-Mechanically Treated bars of grade HYSD Fe-415 or more. 16mm Dia bars straightening, cutting, bending, placing in position and binding all complete upto plinth level to complete the job as per Instructions of Engineer-In-Charge |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level - All work up to plinth level :) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) . To complete the job as per Instructions of Engineer-In-Charge |
| 6 | Brick work with Cement mortar 1:6 (1 cement : 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level up to floor V level in all shapes and sizes in |
| 7 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). To complete the job as per Instructions of Engineer-in-Charge |
| 8 | Structural steel Top and Bottom welding 8mm thick plates work riveted, bolted or welded in built up sections, trusses and framed work, including cutting in oval shape, hoisting, fixing in position and applying a priming coat of approved steel primer all complete and arrange the necessary requirements to complete the as per Instructions of Engineer-In-Charge |
| 9 | MS. Steel work in built Electric resistance or induction butt welded tubes up tubular (round, square or rectangular hollow tubes etc.) trusses, main posts Class-B and truses Class-B type sections etc., including cutting, hoisting, fixing in position and and hinges, applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 10 | MS. Steel work in built Electric resistance or induction butt welded tubes up tubular (round, square or rectangular hollow tubes etc.) trusses, main posts Class-B and truses Class-B type sections etc., including cutting, hoisting, fixing in position and and hinges, applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes |
| 11 | Painting (two or more coats) To pipes sizes 100 mm to 32mm on GI and MS Tubuler pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. (Square or Circular) |
| 12 | Providing and fixing 4mm G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening or nuts, bolts and washers with powder coated as required colour , complete as per the direction of Engineer-in-charge. |
| 13 | Painting on Iron plates Top and Bottom welding 8mm thick plates sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel prime |
| 14 | Providing and fixing the required line and slope roofing with upvc fibre roofing sheets clay type models with 2mm to 4mm thick or required size as approved , fixed with self tapping screws with washers including ridge sheets, over the existing purlins. rafters ,and trusses including cost of ‘materials. labour, complete Complete the work as per Instructions of Engineer-In-Charge |
| 15 | Providing and placing of 120 Ltrs PVC dustbin with automatic lid opening and wheels with approved brand of neil kamal or equalient make t to complete the job as per the instructions of Engineer-In-Charge |
| 16 | Providing and fixing of ACP name boards 24x30 inches with water proof named outdoor sign boards of including bilignal language approved brand to complete the job as per instructions of Engineer-in-Charge |
| 17 | Providing and fixing Heavy Duty Iron Spring Door Closer – Adjustable Surface-Mounted on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender