Tender For Repair And Renovation Of Dangherian Rest House & Washroom At Rd 64500 Of Rajpura Disty
Tender Value
36.68 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
13 days left
EMD
73372
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Dangherian Rest House & Washroom At Rd 64500 Of Rajpura Disty
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 2 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled |
| 3 | Dismantling concrete Reinforced cement concrete |
| 4 | Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means) |
| 5 | Scraping of cement plaster |
| 6 | Cement concrete 1:4:8 thick brick ballast 32mm / 40mm gauge |
| 7 | First class burnt brick work laid in cement sand mortar 1:3 in foundation and plinth |
| 8 | First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level. |
| 9 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 10 | 12.5 mm thick cement plaster 1:3 |
| 11 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc |
| 12 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 13 | Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing |
| 14 | Extra bitumen painting at 0.69 Kg. per Sqm. |
| 15 | Earth work over roofs of one story building with good earth free of any admixture of Earth work over Roofs with good earth free of any admixture of foreign matter including breaking of clods, ramming, watering, dressing and horizontal lead upto 30 metres. |
| 16 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 17 | Teak wood chowkats including iron hold fasts, corner straps, iron hinges, cleats, stops, wooden knobs or handles fixed in position. double rebate ( 60 mm x 150 mm) |
| 18 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjanfacing on both \ Sides with laminated core and lipped edges 25 mm thick |
| 19 | Providing & fixing 30mm thick factory made Hollow PVC Profile PVC Flush door shutter consisting of panel of of 20mm thickness,frame made out of M.S. tubes of size of 19mm x 19mm x19 guage inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hollow profile section using 5mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20mm width on stiles and rails using solvent cement. the inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of panel etc. complete as per manufacturer's specification,conforming totest criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. |
| 20 | cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) for shutter area above 0.50 sqm |
| 21 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300mm x 16mm |
| 22 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface): |
| 23 | Wiring fan point (With fan box) |
| 24 | Wiring light point |
| 25 | Wiring 6Amp. wall socket point |
| 26 | Wiring 16/20Amp. power plug control point |
| 27 | Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-:-Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. |
| 28 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energylimitation class-3, true contact indication, label holder facility in theexisting MCB distribution board as per PWD General Specifications includingconnections with suitable size of thimbles/lugs:- MCB Double Pole 6-32amp. (10kA, CurveC) |
| 29 | MCB Double pole Pole 40amp. (10kA, Curve-C) |
| 30 | MCB Double pole Pole 50,63amp. (10kA, Curve-C) |
| 31 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1 sq.mm (Un-sheathed) |
| 32 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 4 sq.mm (Un-sheathed) |
| 33 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5 sq.mm (Un-sheathed) |
| 34 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge: Overall size 2.5sq.mm (Un-sheathed) |
| 35 | Supply & erection of PVC Conduit Pipes(ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 25mm dia. (flushed) |
| 36 | Providing and fixing 110mm dia UPVC Rain water pipes incl jointing complete |
| 37 | Providing and fixing 110mm dia UPVC Bend for Rain water pipes incl jointing complete |
| 38 | P & fixing MS clamps for Rain water pipes |
| 39 | Providing and fixing in position SWR UPVC soil waste vent pipe or anti syphonage pipe 110 mm OD laid complete. |
| 40 | Providing and fixing in position HCI specials for soil waste vent or anti syphonage pipe to specifications HR Bend . |
| 41 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 42 | 15 mm i/d |
| 43 | 20 mm i/d |
| 44 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 45 | 15mm i/d Gun Metal peet valve heavy pattern. |
| 46 | 20 mm i/d Gun Metal peet valve heavy pattern. |
| 47 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. (triple layer tank) |
| 48 | Providing & fixing in position on terrace (at all floor levels) HDPE tank cover for water storage tanks of approved make (to the approval of Engineer -in-charge) complete in all respect. |
| 49 | Providing and fixing in positionChinaware Floor Mounted One PieceEWC typewith matching chinaware cistern 10 ltr.Capacity. (without cisternfitting) withPtraporStrap of approvedmake (to theapproval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 50 | Providing and fixing in position vitreous Chinaware white l Indianmake largeflatback orangular lipped fronturina l375x390x590 m of approved make (totheapprovalof the Engineer-in-charge) consisting of C.P.brass Urinal waste Coupling dome type 32mm outer length 75mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 51 | P/F brass ball walve 25mm dia |
| 52 | P/F and jointing Union Coupling in GI pipes lines 25mm dia |
| 53 | P/F and jointing Union Coupling in GI pipes lines 40mm dia |
| 54 | Providing and fixing jet spray with2'-6\\" long PVC pipe. |
| 55 | Making connection of sewer line with existing man hole( a) for pipes 100 to 250 mm dia |
| 56 | Waist pipe PVC 32mm dia |
| 57 | Providing and fixing in position gratings 150mm x 150mm for gully trap. |
| 58 | Providing and fixing in position premium range C P brass fittings and accessories of approved make complete in all respects. C P brass towel brack 610 mm long with hangers |
| 59 | Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass screws, complete in all respects including cutting and making good the walls etc. |
| 60 | Providing & fixing in position Gully traps fixed in cement conc. 1:4:8 complete with grating 150mmx150mm cover & frame clear opening 300mmx300mm and outer side 330mmx330mm and chamber incl cost of brick work in CM 1:5 cement concrete 1:2:4 in coping around cover & frame complete |
| 61 | Floor Trap 110mm dia |
| 62 | GI Tank nipple 25 mm |
| 63 | Providing and fixing inpositionC.P. brass overhead shower round or square 1 flow without shower armwith15mmi/d inlet of approvedmake(totheapprovalofEngineer in-charge) complete in all respect. |
| 64 | Providingandfixing inposition towel rails/ ringof approvedmake (to theapproval of Engineer-in-charge) fixedinwithrawlplugs embedded in walls with brass screws complete in all respect. |
| 65 | Providing and fixing inpositionC.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wallwith rawl plugsand C.P brassscrews complete in all respect. |
| 66 | Providing &Fixing in positionC.P. Brass Hexa Nipple 15mm of approvedmake(tothe approvalofEngineer-in-charge)completein all respect. |
| 67 | Providing &Fixing in postion stop cock / Angle valve of approved make (to the approvalofEngineer-in-charge)completein all respect. |
| 68 | providing and fixing in postion storage type automatic electric waterheaterpressure type thermostatically controlled, singlephasewall mounted of approved make (totheapprovalof Engineer-in-charge) with thermostats, inner containerof stainlesssteel, Innerglass lining withB-Ratingminimum3starscompletewith 1Mtr. threecore flexiblecordwithplug, non return valve and pressure release valve complete including fixing and testing complete in all respect. |
| 69 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.Vitreous chinaware standard white pedestal for wash hand basin. |
| 70 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipesasper IS15778(ISImarked with the prior approval of Engineer-in Charge),havingthermalstabilityforhot& cold water supply, including all CPVC plain&brass threaded fittings i/c fixing thepipewithclampsat 1.00mspacing includingjointingofpipes&fittings,with onestepCPVCsolventcementandtesting of pipes complete as per direction of Engineer-in-Charge. 20mm |
| 71 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipesasper IS15778(ISImarked with the prior approval of Engineer-in Charge),havingthermalstabilityforhot& cold water supply, including all CPVC plain&brass threaded fittings i/c fixing thepipewithclampsat 1.00mspacing includingjointingofpipes&fittings,with onestepCPVCsolventcementandtesting of pipes complete as per direction of Engineer-in-Charge. 25mm |
| 72 | Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineerin- charge ) complete in all respect. 20 mm i/d |
| 73 | Precast Cement Concrete Kerb |
| 74 | Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in Charge. |
| 75 | Providing a vitrified floor tiles 600x600mm size premium quality, manufactured using Double charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, |
| 76 | Grouting the joints of flooring tiles having joints of 3mm width, using Epoxy grout mix of 0.70 kg oforganic coated filler of desired shade 0.10kg of hardener and 0.20 kg of resin incl filling and finishing complete.Size 600x600 mm |
| 77 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 78 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 79 | Wire gauge door shutters with kail wood without springs housed in chowkats |
| 80 | Hollow wood doors shutter windows shutter including hinges,screws,chowks,cheats,stop cords etc complete fixed in position.35 mm thick panneled,glazed or panneled |
| 81 | Stainless steel pipes for window grills -(b) 22.22mm outer dia pipe |
| 82 | Applying pink primer on wood work |
| 83 | Scraping White wash and Colour wash etc |
| 84 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish. |
| 85 | Applying Priming coat with cement primer in all shades on newly plastered or conc surface |
| 86 | Wall painting with plastic emulsion paint of approved brand to give an even shade 2 coats |
| 87 | Finishing walls with acralic smooth exterior paint of reqdshade with 2 or more coatsapplied @ 1.67kg/10sqm over and incl. base coat of water proofing cement paint @ 2.20kg/10sqm |
| 88 | Painting two coats with synthetic enamel paints in all shades on newwood work or metallic surface t. |
| 89 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications |
| 90 | Preparation of plywood surface for painting including sand papering |
| 91 | Wall painting with plastic emulsion paint of approved brand to give an even shade 2 coats |
| 92 | Hydralic door closer |
| 93 | Curtain rods 25mm dia |
| 94 | Providing & fixing bajaj LED Luminaire (45 W) street light |
| 95 | Providing 1200 mm Ceiling Fan(Bajaj or Equivalent) complete in all respect. |
| 96 | Providing 30 W LED Recessed Panel Light(Philips or Equivalent) complete in all respect. |
| 97 | Providing LED Batten Tube light(Orient or Equivalent) complete in all respect. |
| 98 | Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested , equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect.(a) Boring with 150mm id Housing Pipe Upto 150 m depth BGL. |
| 99 | Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – incharge. (a) 100 mm nominal size dia. |
| 100 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.(a) 100 mm nominal size dia. |
| 101 | Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984-1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.(A)H.D.P.E pipe of 10 Kg. PE-80 (c) 40 mm o/d |
| 102 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 2.5sq.mm (50/0.25mm), 2Core |
| 103 | Supplying & Fixing of M.S pipe bail plug suitable for 200 mm dia UPVC casing pipe having thickness of socket as 12 mm ,length 100 mm & base plate of 8 mm thick complete in all respect. |
| 104 | Supply and fixing of well cap having thread to fix on housing pipe complete in all respects. (c) 100 mm internal diameter |
| 105 | Providing and fixing of STARTER,MAIN SWITCH/MCCB 32 AMP along with wiring etc. in cubical pillar box type panel board complete in all respects. |
| 106 | Providing and Fixing Submersible 1.5bhp power complete in all respect Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender