Tender For Maintenance Of Curti Water Treatment Plant. Providing Electromagnetic Flow Meter To Conveying Main 300Mm Nirankal Pipe Line At Curti Water Treatment Plant.
Tender Value
3.53 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
6 days left
EMD
7075
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Curti Water Treatment Plant. Providing Electromagnetic Flow Meter To Conveying Main 300Mm Nirankal Pipe Line At Curti Water Treatment Plant.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be levelled and neatly dressed including providing barricading, danger lighting guarding as directed in : |
| 2 | a) Hard rock where blasting prohibited. |
| 3 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminous paint complete. |
| 4 | I) Double Socket Bend 45 Degree |
| 5 | Nominal Diameter in mm |
| 6 | a) 300mm dia |
| 7 | Supplying stacking at site and conveying hoisting, laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting, bending, welding, procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable length to form special, welding on automatic machine and forming V edge on both ends of special as required, hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete |
| 8 | I) With 25 mm thick Plate |
| 9 | a) Flanges |
| 10 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 11 | Supplying, installation, testing and Commissioning of Full Bore Carbon Steel Flanged ends Electromagnetic Flow Meter (FBEM), for Raw/ treated water with accuracy+/-0.5% and sensor of protection of IP 68 Grade for pressure rating PN 16 including sensor coil housed in Cast Aluminium/ Carbon Steel with anti-corrosive food grade powder coating; Co-axial signal sensor/ transmitter & power cable routed through duct of 50mm dia G.I. Pipe; surge arrestor; over voltage protection unit, PTFE/ Rubber Liner material(as desired by the Engineer-in charge). The output showing volumetric flow rate and totalized flow with other details shall be on LCD display screen mounted on the flow meter body or in the nearby control room with upto 25m length transmitter / sensor cabling and simultaneous transmission of reading through GSM Mobile signals to designated phone numbers and meter should have data storage of required capacity and shall be freely programmable for future upgradation and Scada compatible with power supply 80-300 V AC/DC etc. complete as directed by Engineer-in charge. |
| 12 | A) Mandatory Accessories: |
| 13 | 1) 250 |
| 14 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts. |
| 15 | I) Dismantling Joint |
| 16 | Nominal Dia in mm |
| 17 | a) 300mm dia |
| 18 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminous paint complete. |
| 19 | A) Double Flange Reducer |
| 20 | Nominal Diameter in mm |
| 21 | 1) 300x250 mm dia |
| 22 | Supplying stacking at site and conveying hoisting, laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting, bending, welding, procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable length to form special, welding on automatic machine and forming V edge on both ends of special as required, hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete |
| 23 | I) With 10 mm -12 mm thick plate |
| 24 | a) M.S.spigot tail piece suitable for connecting M.S pipeline with C.I./D.I pipeline Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender