Tender For Renovation Work Of Main Building In Senior Officers Flat No. 2/8 At Near Machli Ghar, Booty Road, Ranchi
Tender Value
51.90 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
0 days left
EMD
1.03 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work Of Main Building In Senior Officers Flat No. 2/8 At Near Machli Ghar, Booty Road, Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 5 | Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 6 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc all completejob. |
| 7 | Disposal of building rubbish/malba/similar unservicable dismantied or waste materials by mechanical means,including loading transporting,unloading to approved municipal dumping ground or as approved by E/I.beyond 50m intial lead for all leads including all lifts involved all complete job as per direction of E/I. |
| 8 | Dismantlingtile work in floors and roofs laid in cement mortar including stacking material with in 50 metres lead for thickness of tiles 10mm to 25mm including all complete job as per direction of E/I. |
| 9 | Dismantling of flushing cistern of all types (C.I./Pvc/Vitrious china) including stacking of useful materials near the site and disposal of unservicable materials within 50metres lead. |
| 10 | Dismantling UPVC or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead: |
| 11 | 75 to 80mm dia pipe internal |
| 12 | 100mm dia pipe |
| 13 | 150mm dia pipe |
| 14 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, scaffolding raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 15 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 17 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform |
| 19 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500( onle valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) |
| 20 | providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. |
| 21 | (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 22 | (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 23 | Providing 6mm thick cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 24 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 25 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I. |
| 26 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 27 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 of (Thickness to be specifed by the manufacturer) of approved make in all colours shades except burgundy,bottle green,black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm thick bed of c ement mortar 1:3(1cement:3COARSE SAND) AND JOINTING WITH GREY CEMENT SLURRY @ 3.3KG PER SQM INCLUDING POINTING IN WHITE KCEMENT MIXED WITH PIGMENT OF MATCHING SHADE COMPLETE. job as per direction of E/I |
| 29 | Providing and laying vitrified tiles in floor in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & Manufacturer in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing wth grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles including all complete. Glazed vitrifieid tiles Matt/Antiskid finish (size 600x600mm) |
| 30 | Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for kitchen platforms, vanity counters windows sills, facias and similar locations of required size approved shade,colour and , texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite Stone slab of colour black,chrry /Ruby red ,area of slab over 0.50sqmm |
| 31 | Providing and laying polished vitrified tiles in floor in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & Manufacturer in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing wth grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles including all complete. Glazed vitrified floor tiles polished finish of (size 600x600mm) |
| 32 | Providing and laying flamed finish Granite stone flooring in requireddesign and patterns, in linear as well as curvilinear portions of the buildingall complete as per the architectural drawings with 1 8 mm thick stoneslab over 20 mm (average) thick base of cement mortar 1 : 4 (1 cement: 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing,curing and polishing etc. all complete as specified and as directed by theEngineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 33 | Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work |
| 34 | Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat square bar as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials is not supplied by the deptt) |
| 35 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all complete as per building specification and direction of E/I. |
| 36 | Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly |
| 37 | sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I.section of steel reinforcemenntr and cross sections of UPVC profiles to be as per design approved by E/I. wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds. |
| 38 | Three track three panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track,wool pile,nylon rollers with SS 304 bodyUsing R4 series withframe (115mm& above)x(45mm&above)& both glazed and fly screen sash (44mm &above)x(55mm&above) with zinc alloy(zamak)powder coated handle on every glazed panel along with multi point locking ksystem(height above 1.8m) |
| 39 | Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm) |
| 40 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows,ventiators and partition etc. with 6mm thick clear float glass both side,having 12mm air gap,including providing EPDM gasket,perforated aluminium spacers,desiccants,sealant (Both primary and secondary sealant) etc.as per kspecifications drawings and direction of Engineer-in-charge complete. |
| 41 | Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and C/W celetial windows openings, including wedge over all clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l |
| 42 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 43 | Providing and fixing decoravtive high pressue laminated sheet of plain/wood grain in glose/matt,suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S,including cost of adhesive of approved quality including all complete job as per direction of E/I.1.5mm thick |
| 44 | Providing and fixing 12 mm thick frameless toughened glass door shutterof approved brand and manufacture, including providing and fixing top &bottom pivot & double acting hydraulic floor spring type fixing arrangementand making necessary holes etc. for fixing required door fittings, allcomplete as per direction of Engineer-in-charge (Door handle, lock andstopper etc.to be paid separately). |
| 45 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing cleaning the surface after cleaning removing dirt scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 46 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONALanti-termite treatment (excluding the cost of chemical emulsion) :Treatment at points of contact of wood work by chemical emulsion chlorpyriphos (in oil or kerosence based solution @ 0.5 litres per hole by drilling 6 mm dia holes at downward angles of 45 degree at 150mm centre to centre and sealing the same. |
| 47 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes. |
| 48 | 110mm diameter |
| 49 | Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion. |
| 50 | Coupler 110mm dia |
| 51 | Bend 87’5 110mm |
| 52 | shoe(plain) 110mm dia |
| 53 | Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4(1cement:4 coarse sand) and making good the wall etc.complete. |
| 54 | 75mm dia |
| 55 | 110mm dia |
| 56 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting |
| 57 | clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing apes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with |
| 58 | Fully perforated Gypsum plaster Board of size 1200x2400x12.5mm having approx 15% perforataed area with perforation size and pattern as approved by the Enginner-in-charge and as per manufacturer's specification with all 4 sides tapered and backed by acoustical tissue withNRC value not less than 0.60 |
| 59 | Providing and fixing stanless steel(Grade 304) railing made of Hollow tubes,channells,plates etcincluding welding,grinding,buffing,polishing and making curvature( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,I/C fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc,of required sizie,onthe top of the floor or the side of waist slab with suitable arrangment as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoreis such as nuts,bolts,fastners etc) |
| 60 | Providing and fixing fly proof wire gauze to windows,clearstory windows& doors with M.S.flat 15x3mm and nuts & bolts complete stainless steel (grade 304) wire gause of 0.5mm dia wire and 1.4 mm aperture on both sides including all complete job.as per direction of E/I. |
| 61 | Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossed onthe body, door weight upto 35 kg and door width upto 700 mm), withnecessary accessories and screws etc. complete.ing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. completeiding and fixing bright finished brass handles with screws etc.compelte. (125mm) |
| 62 | Providing and fixing bright finished brass parliamentary hinges withnecessary screws etc. complete 150x125x27x5mm |
| 63 | Providing and fixing bright finished brass parliamentary hinges withnecessary screws etc. complete 250x10mm |
| 64 | Providing and fixing bright finished brass night latch of approved quality includingnecessary screws, etc. .compelte. |
| 65 | Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers of approved quality including necessary screwsetc. complete. 75mm dia |
| 66 | Providing and fixing bright finished brass handles with necessary screws, etc.compelte. (125mm) |
| 67 | Providing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. complete. |
| 68 | Providing and fixing achromium plated brass 100mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary sscrews etc.complete. |
| 69 | S/F/F VIP Bath room fitting including all complete job as per direction of E/I. |
| 70 | Angular stop cock |
| 71 | Swan Neck Tap with left hand operating knob(ISI Maraked) including all complete job. |
| 72 | Sink mixer withswinging casted spout |
| 73 | Sink cock withswinging casted spout |
| 74 | Thumbler Holder |
| 75 | Toilet paper holder |
| 76 | Flush valve complete with 32mm size control cock & Flange |
| 77 | Bib cock (Long tahread) |
| 78 | Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc |
| 79 | 15mm nominal dia pipes |
| 80 | 20mm dianominal dia pipes |
| 81 | Providing and fixing Chlorinated polyvinyl chloride (PVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings..This included jointing of the pipes & fittings with one step CPVC solvent cement trencing,refilling & testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(External work) |
| 82 | 25mm dia nominal dia pipes |
| 83 | 32mm dia |
| 84 | Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C.(1:3:6)in foundation and refilling all complete as per specification and direction of E/l. |
| 85 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes. |
| 86 | 75mm dia |
| 87 | Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion. |
| 88 | Couplar 75mm dia |
| 89 | Single pushfit coupler 75mm dia |
| 90 | Single pushfit coupler 110mm dia |
| 91 | Single Tee with door |
| 92 | 75x75x75mm |
| 93 | 110x110x100mm |
| 94 | Single Tee with out door |
| 95 | 75x75x75mm |
| 96 | 110x110x100mm |
| 97 | Bend 87’5 |
| 98 | 75mm dia |
| 99 | shoe(plain) |
| 100 | 75mm dia |
| 101 | Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I. |
| 102 | Brick lead 8K.M(1K+7P) |
| 103 | sand lead 8K.M. |
| 104 | chips lead 22K.M. |
| 105 | Stone Metal 20 km lead |
| 106 | Providing & fixing of modular kitchen cup board of steel rack hing basket with ply facing provision of all fitting of Modular kitchen with 19mm thick BWP board of century ply on front top side with rack 1.5mm thick laminate laminated 2’0”x1’6”x0’9” steel rock hing bocket with teak wood beads and copping provision of all fitting of modular kitchen component such as shutters, channel rail ,nut bolts, hings glass all modular fitting all as pr building specification and direction of E/I Century mark ply & laminate,channel lock Handle and other fittings are hettich make, door closer Godrej & edge brinding with PVC all complete job(Including frame work of cocking plate form) |
| 107 | Supplying fiting Fixing 2 Feet Deep cupboard Wardrobe with 19mm thick BWP Grade marine ply as per IS 710 of approved brand and stick to internal side 1.5mm thick laminiated and external front side 4mm coir veneered with high glass meiamine polish including all cost of materials, labour, taxes all complet as per building specification and direction of E/i |
| 108 | S/F/F all height wall panneling or TV unit with 12mm thick ply wood over 50mmx25mm aluminium section,24mm thick WPC Louver with all material and labour all complete as per building specification and direction of E/I |
| 109 | Providing and fixing all high wall paper with royality all complete job as per building specification and direction of E/I. |
| 110 | Supplying fitting & fixing for pletnium Golden Brass Letter without LED light including all cost of materials,labour,taxes all complete as per bui |
| 111 | Supplying &fixing PRIMA 15mm Brass Fancy Tap PRIMA(Wall mixer 3 in 1 with L bend 15mm(POL 7116),product Id: 5116877-24897712273 including all complete job. |
| 112 | Supplying &fixing PRAYAG Double bowl without drainer stainless steel sinks PSS-19(DUET REGULAR KDOUBLE BOWL)(KICHEN STEEL SINK WITH DRAIN) including all complete job. |
| 113 | Supplying and fixing Jaquar Bathroom Exposed Rain shower cast Brass Grade LCB-2 of IS 292/1983 including all complete job. |
| 114 | Supplying and fixing Jaquar Bathroom Hand shower cast Brass Grade LCB-2 of IS 292/1983 including all complete job. |
| 115 | Supplying and fixing Cornet Bathroom or Toilet Mirror Hanging system including all complete job. |
| 116 | Providing and fixing PRIMA Towel Rail stainless steel make it PRIDE with cat no(Towel rack 600mm new) and product id 5116877-19725686) |
| 117 | Supplying fitting of PRIMA Towel Rail cast Brass Grade LCB-2 OF IS:292/1983. product id: 5116877-20934319528 including all complete job. |
| 118 | Supplying and fixing shakti Liquid soap Dispenser including all complete job. |
| 119 | Supplying &fixing PRAYAG Floor Drain Traps having Round shape and made up of SS 202 Prayag including all complete job. |
| 120 | Supplying &fixing Oler Trap Bowl(Flat Back) without Flushing Rim,size q:(410x265x305) including all complete job. |
| 121 | Supplying and fixing of health faucet with 1meter long Easy flex tube in chrome finish & wall flap including all complete job. |
| 122 | Supplying fitting of PRIMA 15mm Copper tube Fancy Tap including all complete job. |
| 123 | Supplying and fixing of Dpride 15mm Brass Bfancy Tap Pride (C.P.wall mounted sink mixer )including all complete job. |
| 124 | Supplying and fixing of HINDWARE Box Rim Type European pattern Toilet seat,Product id:5116877-34229376786 including all compelte job. |
| 125 | Supplying and fixing of Jaquar Puush Button type flushing cistern Dual Flush sysstem 10Ltr including all compelte job. |
| 126 | Supplying and fixing Hindware viterous china sinks/wash Basins Flat Back and Rectangle LYS WHT 38931) including all complete job. |
| 127 | Providig and fixing 25liter 4star water Heater makeBAJAJ with cat no(BAJAJ 25L T CALENTA M.S.STAR GEYSER) andproduct id 5116877-99621432880) |
| 128 | Add 18 % GST (in Basic Rate must fill 12) |
| 129 | Add 1% Labour Cess (in Basic Rate must fill 1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender