Tender For The Repair Of The District Sainik Welfare And Rehabilitation OfficerS Residence.
Tender Value
12.41 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
4 days left
EMD
25000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For The Repair Of The District Sainik Welfare And Rehabilitation OfficerS Residence.
BOQ
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.(For Door and window) |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.( For thickness of tiles 10 mm to 25 mm) |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 5 | 12 mm thick cement plaster 1 : 4 cement and fine sand mortar |
| 6 | Providing and laying vitrified floor tiles of approved quality and size (thickness as specified by the manufacturer) with water absorption less than 0.08%, conforming to IS:15622, in flooring.Tiles are laid on 20 mm thick cement mortar bedding (1:4) and jointed with grey cement slurry @ 3.3 kg per sqm.The joints are finished with white cement mixed with matching pigment, including cutting of tiles wherever required and finishing complete.Sizes 600 × 600 mm vitrified tiles |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour ( New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre) |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 9 | New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 10 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 11 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and skylights, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 12 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. flat 15 × 3 mm and nuts & bolts complete |
| 13 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 14 | Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. 40 mm wide and 4 mm thick. |
| 15 | Supply of 110 mm dia PVC pipe including all labour material complete. Ch-1 Material S.I.NO 36/ 30 PWD SOR 2021-22 |
| 16 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm |
| 17 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 18 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS :7231, with all fittings and fixtures complete, including,cutting and making good the walls and floors wherever required white viterous china orissa wc pan of size 580x 440 mm with integral type foot rests |
| 19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 20 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 15 mm nominal outer dia. Pipes. |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 25 mm nominal outer dia. Pipes. |
| 23 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 25 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 26 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm |
| 27 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 28 | Wiring point for light with 1.5 sq.mm FRLSH PVC insulated mutistrand single core copper conductor cable in PVC conduit pipe on surface in wall complete with 14 swg copper earth continuity wire piano type switch and ceiling rose /angle /batten holder on 3 |
| 29 | Wiring point for fan/fresh air fan (light duty exaust fan) with 1.5 sq mm. PVC insulated single core aluminium conductor cable in PVC conduit with 1.5 sq mm, FR PVC insulated multistraned copper conductor cable as earth wire drawn inside the conduit. S |
| 30 | Fixinng and supply of ceiling fan ISI mark with materials etc. |
| 31 | Supply & fixing of Exaust fan ISI mark with material etc. |
| 32 | Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated mutistrand single core copper conductor cable in PVC conduit pipe on surface in wall complete with 14 swg copper earth continuity wire piano type switch and Socket etc. Same |
| 33 | Supply and fixing of Power Plug with 15Amp/250volt flush type modular switch 5 pin 20 A/ 250 volt flush type universal modular socket in suitable m.s. box of 175mm*100mm*50mm size with phenoic laminated bakelite sheet cover 3 mm thick fixed with brss ach |
| 34 | Supply & fixing of 6 Amp. To 32 Amp M.C.B. (10KA) etc.(S.I. NO. 1002 ) Category B |
| 35 | S&F surface/flush mounting 4 ways SPN distribution board witht additional metal door without MCB complete in all respect as directed at site by Engineer in charge. SI No.-1022, CAT B |
| 36 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 37 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 38 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type |
| 39 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 40 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: |
| 41 | P/F of Innaguration/ Sign Board at Site i/c all complete as per Site In Chanrge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender