Tender For Construction Of Sabhagruh At Kusumba Tal.Dist.Dhule
Tender Value
21.09 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
1 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhule → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sabhagruh At Kusumba Tal.Dist.Dhule
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift upto 1.5 metre) By Mechanical Means |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift upto 1.50 metre) By Mechanical Means |
| 3 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting Etcetera complete. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in Mix-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish Indian Standards to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 5 | Providing and fixing in position Thermo Mechanical Treated - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches Etcetera as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 6 | Providing and laying in situ /Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions Etcetera including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish Indian Standards to be provided (Excluding reinforcement and structural steel) Etcetera complete, with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish Indian Standards to be provided and curing Etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish Indian Standards to be provided and curing Etcetera complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 9 | Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering Etcetera Complete. |
| 10 | Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Etcetera Complete. |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete Mix-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish Indian Standards to be provided, finishing uneven and honeycombed surface and curing Etcetera complete. The Cement Mortar 1:3 plaster Indian Standards considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin Etcetera (Wooden centering will not be allowed.) With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 12 | Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre Layers including watering and compacting Etcetera complete. |
| 13 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetra complete. |
| 14 | Providing and fixing Mix-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to Indian Standards 65241983 having 6 milimetre diametre bars 3 Numbers And stirrups @250 milimetre center to center and fixing in wall with 6 Numbers of hold fast of 12 milimetre dia bars 500 milimetre long including primer and oil painting etcetra, complete) frame size 60 milimetre x 100 milimetre. |
| 15 | Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap/ granite /quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetra complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetra complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade) |
| 16 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates Etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade Etcetera complete. |
| 17 | Providing and fixing corrugated galvanised iron sheets of 0.63 milimeter thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing Etcetera complete.(Weight of 5.5 Kilogram per square metre) |
| 18 | Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etcetra complete. |
| 19 | Providing fine cement finish 1.5 milimetre thick over green plaster surface including scaffolding curing Etcetera complete. |
| 20 | Providing and fixing mild steel grill work for windows, ventilators, Etcetera 15 Kilogram per One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 21 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 22 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required Etcetera complete. |
| 23 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) Etcetera complete. |
| 24 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning , preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days Etcetera complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 25 | Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning Etcetera complete. |
| 26 | Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 Kilogram per One Running Metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 Kilogram per One Running Metre Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 Kilogram per Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 Kilogram per One Running Metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 Kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 Kilogram per Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetra, complete. With colour Anodising with box |
| 27 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality Etcetera complete. |
| 28 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade Etcetera complete. (weight 18 Kilogram to 20 Kilogram Per Square metre) |
| 29 | Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish Etcetera complete. |
| 30 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 milimetre thick for door frame/ dado/ window boxing Etcetera On Cement Mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, Etcetera complete. |
| 31 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to Indian Standards 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing Etcetera complete. |
| 32 | Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre confirming to corresponding Indian Standards for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing Etcetera complete. |
| 33 | Providing and laying Vitrified mirror/glossy finish having decorative type of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to Indian Standards 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning Etcetera complete. |
| 34 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 milimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols Etcetera with approved colour shade paint complete, on Mild Steel angle of size 35 x 35 x 3 milimetre frame with properly cross braced Mild Steel angles of size 35 milimetre x35 milimetre x3 milimetre duly painted including Two Mild Steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation, and labour Etcetera complete. |
| 35 | Providing and fixing 75 milimetre dia stabiliser pipe/ Polynvinyl Cloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetra complete. |
| 36 | Providing and fixing 100 milimetre dia stabiliser pipe/ Polynvinyl Cloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetra complete. |
| 37 | Providing and fixing on walls/ ceiling/ floor 25 milimetre diametre Chlorinated Polyvinyl Cloride pipe with necessary fittings, remaking good the demolished portion Etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Etcetera complete. |
| 38 | Providing and laying in trenches 25 milimetre daimetre Chlorinated Polyvinyl Cloride pipe including necessary excavation, fittings. Refilling trenches Etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Etcetera complete. |
| 39 | Providing and fixing 10 centimetre Polynvinyl Cloride nahani trap with grating Etcetera complete. |
| 40 | Providing, laying and fixing ,jointing Eco- drain 160 milimetre SN 4 Nu- Drain Unplasticized polynvinyl cloride pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per Indian Standards 15328 with fittings such a bends, tees, coupler, etcetra jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etcetra complete. |
| 41 | Providing and fixing white glazed earthenware Wash Hand Basin of 55 centimetre x 40 centimetre size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including Polynvinyl Cloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing Etcetera complete. |
| 42 | Providing and fixing Orissa type white glazed earthenware 575 milimetre water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories Etcetera complete. |
| 43 | Providing and fixing High Density Polythylene container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 44 | Providing and fixing screw down for 25 milimetre diametre wheeled stop tap of brass including necessary sockets/union nut complete. |
| 45 | Testing ChargesCrush Metal : Water Absorption, Specific Gravity, Impact Value, Crushing Value |
| 46 | Flakiness Index and Elongation Index |
| 47 | Sand : Silt Test and Gradation |
| 48 | Cement : Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness |
| 49 | Cement Concrete : Compressive Strength of C.C. Cube (Set of 3 Subes) |
| 50 | Bricks : Water Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks), |
| 51 | TMT Steel : Upto 16 mm (Set of 3 Bars) (Tensile Strength, %elongation, Yield Stress, Weight Per Meter, Bend / Rebend Test, Proof Stress) |
| 52 | Royalty Charges for Sand |
| 53 | Royalty Charges for Other Material Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender