Tender For Repair / Replacement Of Street Lights, High Mast Lights, High Bay Lights, Pathway Lights, Post Top Lantern Fittings, Garden Lights, Solar Lights Fittings Including All Connected Accessories / Items At Coast Guard, Namunaghar, Trv Area Of A
Tender Overview
Project Description
Tender for Repair / Replacement Of Street Lights, High Mast Lights, High Bay Lights, Pathway Lights, Post Top Lantern Fittings, Garden Lights, Solar Lights Fittings Including All Connected Accessories / Items At Coast Guard, Namunaghar, Trv Area Of Age E/M Under Ge Haddo Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Excavation in trenches not exc 1.5 M deep and 1.5 M width and getting out in soft or loose soil for foundation of poles (or) cable laying complete all as specified and directed. |
| 2 | M&L for Returning, filling incl spreading, levelling, watering and well ramming layers not exc 25 M for cable laying complete all as specified and directed. |
| 3 | M & L for Removing/excavated soil to a distance not exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed. |
| 4 | M&L for Precast cement concrete (PCC) type B1 1:2:4 using 20mm graded aggregate stone for making copings including use and waste of form work complete etc. all as specified and directed. |
| 5 | Supply,laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 2 x 6 sqmm (laid in terenches,ducts,pole,wall etc.) incl taking down old unsv cable all as specified and directed. |
| 6 | Supply,laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 2 x 10 sqmm (laid in terenches,ducts,pole,wall etc.) incl taking down old unsv cable all as specified and directed. |
| 7 | Supply,laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 4 x 16 sqmm (laid in terenches,ducts,pole,wall etc.) incl taking down old unsv cable all as specified and directed. |
| 8 | Supply,laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 4 x 25 sqmm (laid in terenches,ducts,pole,wall etc.) incl taking down old unsv cable all as specified and directed. |
| 9 | Supply,laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 3.5 x 35 sqmm (laid in terenches,ducts,pole,wall etc.) incl taking down old unsv cable all as specified and directed. |
| 10 | Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 40 mm(OD) x 32mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection including taking down old pipe all as specified and directed. Make:Rex Poly Extrusion Ltd/ Tirupati Plastomatics Pvt Ltd./ Prince |
| 11 | Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 50 mm(OD) x 38mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection including taking down old pipe all as specified and directed. Make:Rex Poly Extrusion Ltd/ Tirupati Plastomatics Pvt Ltd./ Prince |
| 12 | Supply & fix in replacement FRP pole box 170 x 170 x 105 mm consisting of 1 No 50 A 4 pole connector and 1 No 16 A MCB SP including taking down the old/unserviceable junction boxes all as specified and directed. Make : SINTEX Cat No. GS-JB-1414 or equivalent & Make of MCB: L&T/Havells/ Legrand/Indo Asian |
| 13 | Supply & fix in replacement FRP pole box 240 x 130 x 95 mm (inside dimension) consisting of 1 No 50 A 4 pole connector and 1 No 6-16 A MCB SP(as required) including taking down the old/unserviceable junction boxes all as specified and directed. Make : SINTEX Cat No. GS-JB-2817 or equivalent Make of MCB: L&T/Havells/ Legrand/ Indo Asian |
| 14 | Supply & fix Cable Junction Box of size 130 x 130 x 77, IP 66 (Grey) with integrated membranes / metric knockouts for cable entry of size 2.5 sqmm to 6 sqmm twin core with earth ,Lighting Outgoing cable: 3C x 1.5/ 2.5 Sq.mm cable, Degree of protection: IP66, including terminals, Material: PC-GFS (polycarbonate) , Weatherproof, resistant to weather influences including taking down the old/unserviceable junction boxes all as specified and directed by Engr In Charge. Make : Hensel model No DK 0606 G or equivalent to Sintex |
| 15 | Repair / maintenance of street / security lights any type, flood lights,higbay lights, any other external lights in its position fixed on pole / building structure or by taking down to ground, if required, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like choke (ballast), electronic driver (in case of LED lights), ignitor, capacitor, lamp, lamp holder, connector, connection wires/ cable, MCB etc including refixing the fitting to its original position (if taken down), including repair / maint of street light control timer & junction box all as directed by Engr-in-charge.Note: (i) The rate against the above mentioned item is deemed for cost of labour and allied expenses only. (ii) Spares such as Choke (ballast), electronic driver, ignitor, capacitor, lamp, lamp holder, connector, connection wire, MCB, timer spares etc) replaced against above mentioned shall be supplied at MES store as supply only (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defective light fittings and will submit the completion report as per complaints received on the same day before 1730hrs to the JE E/M. |
| 16 | Repair / maintenance of garden lights/ path way lights or by taking down to ground, if required, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like choke (ballast), electronic driver (in case of LED lights), ignitor, capacitor, lamp, lamp holder, connector, connection wires/ cable, MCB etc including refixing the fitting to its original position (if taken down), including repair / maint of street light control timer & junction box all as directed by Engr-in-charge.Note: (i) The rate against the above mentioned item is deemed for cost of labour and allied expenses only. (ii) Spares such as Choke (ballast), electronic driver, ignitor, capacitor, lamp, lamp holder, connector, connection wire, MCB, timer spares etc) replaced against above mentioned shall be supplied at MES store as supply only. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defective street light fittings and will submit the completion report as per complaints received on the same day before 1730hrs to the JE E/M. |
| 17 | Supply and fixing in replacement of LED floodlight of cap 200 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection, System efficacy ≥ 110/120LPW 10KV included driver including fixing on High mast of any hight or any pole/ wall/ iron structure etc including taking down of the old unserviceable halogen/any type of old unsv light fittings all as specified and directed.Make: CG Model No : LFLN-200-CDL/60-M or equivalent model of /Philips/Havells/Luker |
| 18 | Supply and fixing in replacement of LED floodlight of cap 150 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection, System efficacy ≥ 110/120LPW 10KV included driver including fixing on High mast of any hight or any pole/ wall/ iron structure etc including taking down of the old unserviceable halogen/any type of old unsv light fittings all as specified and directed. CG Model No :LFLN-150-CDL/60-M or equivalent model of /Philips/Havells/Luker |
| 19 | Supply and fixing in replacement of LED floodlight of cap 120 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection, System efficacy ≥ 110/120LPW 10KV included driver including fixing on High mast of any hight or any pole/ wall/ iron structure etc including taking down of the old unserviceable halogen/any type of old unsv light fittings all as specified and directed.CG Model No :TFS-504-120-57-60D-HL2-GL-NBK or equivalent model of /Philips/Havells/Luker |
| 20 | Description all as per item No 19.0 above but LED floodlight of cap 70 watt. Make: CG Model No :LFL-70-CDL/60-M or equivalent model of /Philips/Havells/Luker |
| 21 | Supply and fixing in replacement of LED floodlight of cap 50 watt (of any coloured as reqd) made up of pressure die cast aluminium housing with toughened glass and high power LEDs included driver along with mounting bracket including fixing on pole/ wall/ iron structure etc including taking down of the old unserviceable halogen/any type of old unsv light fittings all as specified and directed.Make: Luker Model No : LFLSL50NSG or equivalent model of /Philips/Havells/CG |
| 22 | S & F high performance street light luminaire of cap 60 watt having single die ceramic base high power LED light source, IP66 protection with SPD version, PDC housing with finless design and polycarbonate cover including taking down the old unsv light fitting of any type all as specified and directed. Make:- CG model No TRP-421-60-57-SL-LM-NBK or equivalent to Havells |
| 23 | Supply and fixing of LED street light fixture of cap 70 watt ,aerodynamically designed for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy > 110/120 LPW, with 10KV SPD including taking down the old unsv light fitting of any type all as specified and directed. Make: CG Model No :TRP-409-70-57-SL-GL-NSG or equivalent model of /Philips/ Havells/ Luker Please Enable Macros to View BoQ information |
| 24 | Supply and fixing of LED street light fixture of cap 70 watt ,aerodynamically designed for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy > 110/120 LPW, with 10KV SPD including taking down the old unsv light fitting of any type all as specified and directed. Make: CG Model No :TRP-409-70-57-SL-GL-NSG or equivalent model of /Philips/ Havells/ Luker Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender