Tender For Addition/Alteration Of Dinning Area Of Dsc Platoon, Special Repair Of Lightening Protection For P-1 Bldg At Dhq-7 And Provision Of Lightening Protection At Ship Support Complex At Paradip Under Ge (I) (Cg) Bhubaneswar
Tender Value
13.36 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
12 days left
EMD
26720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration Of Dinning Area Of Dsc Platoon, Special Repair Of Lightening Protection For P-1 Bldg At Dhq-7 And Provision Of Lightening Protection At Ship Support Complex At Paradip Under Ge (I) (Cg) Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Material and labour Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick rendering in cement mortar (1:6) complete all as specified and directed. |
| 3 | Material and labour glazed ceramic coloured tiles of size 600x450mmx7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete all as specified and directed. |
| 4 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry over and including provision of 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 5 | All as per item No 04 but vertical surfaces such as skirting, dados etc over 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces. |
| 6 | Demolition of brick work or stone/boulder masonry,built in cement mortar or cement lime mortar including all quoins arches,pillars,etc complete all as specified and directed. |
| 7 | Demolition of Concrete of any description and in any position not otherwise specifically provided for,etc complete all as specified and directed. |
| 8 | Brickwork with fly ash modular bricks, built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. |
| 9 | Material and labour for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in cills, steps; seismic , parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs including necessary form work finished fair and even surface without using extra cement and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 10 | Rendering 15 mm thick cement plaster in CM 1:4 fair faces of brick Work including finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distember over a coat of alkali resistant priming paint & smooth surface over a coat of alkali resistant priming coat etc. complete all as specified and directed. |
| 12 | M&L for RCC nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | Form work to soffits of suspended slabs, floor slabs and similar work; not exceeding 200 mm thick(Horizontal or sloping) with with rough finished & flat surface of concrete complete all as specified and directed. |
| 14 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 15 | M&L for mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including crancking bending, spirally for hopping for columns etc hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed complete all as specified and directed. |
| 16 | S&F of Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 17 | Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron complete all as specified and directed. (Note- Glass shall be measured and paid separately) |
| 18 | Supply and fixing powder coated anodised aluminium window and ventilator shutters, fixed, openable/ sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. (Note- Glass shall be measured and paid separately) |
| 19 | Providing and fixing zinc alloyed (white powder coated tough lock for UPVC sliding window with necessary screws etc complete all as specified and directed. |
| 20 | Supply and fixing aluminum anodized grill DG 202 powder coated of 10 mm dia rod square , rectangular, circular or similar type of shape, aperture not exc 5 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) Make Grill No 20 of DECOREL or equivalent complete all as specified and directed. |
| 21 | Supply and fixing Figured glass 5mm thick,pin head type and glazing in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 22 | Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 23 | M&L for Granite (of any type) work (table rubbed and polished) of 20 mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 24 | Providing edge moulding to 18-20 mm thick stone of counters vanities etc, incl machine polishing to edge to give high gloss finish etc,complete all as specified and directed. |
| 25 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 26 | Supply and fixing GI tubes,20mm bore 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 27 | Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth complete all as specified and directed. |
| 28 | Supply and fixing 75 mm PVC (SWR) floor trap plain with grating including jonting with solvent cement complete all as specified and directed. |
| 29 | Supply and fixing 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all as specified and directed. |
| 30 | Supply and fixing 15mm bore Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 31 | Taking down of aluminium strip any type and size all as specified or indicated including testing on completion complete all as specified and directed. |
| 32 | Supply and fixing of 25x3.15 mm aluminium strip including PVC saddle as per sample approved complete all as specified and directed. |
| 33 | Supply and fixing single pointed Air termination , Aluminium rod 12 mm dia and 300 mm long fixing with two nos nuts and washers complete all as specified and directed. |
| 34 | S&F GI strip 32 mm x 6 mm complete laid in trenches / ducts / wall fixed on with proper insulating material (in extn of earthings) complete all as specified and directed. |
| 35 | M&L in replacementof earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm as earthing lead by means of check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcoal dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 40 mm up to 7.5 m shall be included in cost of above item. |
| 36 | M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm as earthing lead by means of check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcoal dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 40 mm up to 7.5 m shall be included in cost of above item. |
| 37 | M & L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. |
| 38 | S & F Tubes, 'light grade', galvanised 40mm bore with all fitting; laid in trenches/fixed to wall complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender