Tender For Construction Of Frh At Gandhtop Basantgarh Forest Range Ramnagar Forest Division Under Capex For The Year 2026 -27
Tender Value
62.50 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
5 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Frh At Gandhtop Basantgarh Forest Range Ramnagar Forest Division Under Capex For The Year 2026 -27
BOQ
| Sl. No. | Item Description |
| 1 | Dismentaling of CGI sheet roofing and stacking of material in stacks at approprate place. |
| 2 | Dismentaling of wooden truss including ceiling and stacking of material in stacks at approprate place. |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar. |
| 4 | Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix). |
| 5 | Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size. |
| 9 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in super structure Cement mortar 1:6 ( 1 cement : 6 fine sand) |
| 10 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level Qty vide item no:-5 |
| 11 | Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 12 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 13 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 19 | Centring and shuttermg including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 20 | Centring and shuttermg including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 21 | Edges of slabs and breaks in floors and walls. Under 20cms wide |
| 22 | 6mm Cement plaster of mix: 1 : 3 ( 1 cement : 3 fine sand) |
| 23 | 15mm Cement plaster mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 24 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 25 | Providing and laying vitrified floor / wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick. Qty item(22,23,24-26) |
| 28 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (22,23-26) |
| 29 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) vide no. 24 |
| 30 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work Qty vide item no:-30 |
| 32 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. With hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or with dash fasteners shall be paid for separately)Sal wood |
| 33 | Providing and fixing panelled or panelled and glazed shutters for doors , windows, and clerestory including ISI marked black enamelled M.S. Butt hinges with necessary screws excluding penelling which will be paid for separately, all complete as per direction of engineer-in -charge. Second class Deodar wood. 30mm. |
| 34 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30mm thick |
| 35 | Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for aperture 1.4 mm in both direction with wire of dia. 0.63mm for doors, windows with necessary secrews ISI marked M.S pressed bright finished butt hinges with necessary screws of required size.second class deodar wood |
| 36 | Float glass panes of thickness 5.0 mm(weight not less than 12.5kg/sqm) |
| 37 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting , hoisting , fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 38 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 39 | providing& fixing ISI market oxidised M.S tower bolts black finished (Barrel type) with necessary screws etc. complete. 150 x 10 mm |
| 40 | Providing &fixing ISI merked oxidised M. S handles conforming to IS : 4992 with necessary screws etc. complete. 125 mm |
| 41 | Providing &fixing ISI merked oxidised M. S handles conforming to IS : 4992 with necessary screws etc. complete. 100 mm |
| 42 | Providing & fixing arl drop lock. |
| 43 | Providing & fixing aluminium hanging floor door stopper ISI merked anodised ( anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or shade with necessery screws etc. complete: Mild steel fittings bright finished or black enamelled 150 mm hooks & eyes |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 45 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 110 mm diametre |
| 46 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 75 mm diametre |
| 47 | Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS: 7231, with all fittingsand fixtures complete, including cutting and making good the walls andfloors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 48 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance om wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighingnot less than 105 gms. |
| 49 | Providing and fixing C P jali. |
| 50 | Providing and fixing Waste pipe for wash basin |
| 51 | Providing and fixing uplasticized PVC connection pipe with brass unions 30 cm length 15 mm nominal bore |
| 52 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 |
| 53 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever quired White Vitreous China Wash basin size 630x450 mm with a pairof 15 mm. |
| 54 | Providing and fixing hand jet. |
| 55 | Mirror of superior make glass 60x45 cm. |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.20mm nominal outer dia pipesInternal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 57 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cockof approved quality conforming to IS standards and weighing not lessthan 810 gms |
| 58 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brickhoney comb shaft with common burnt clay (non modular) bricks of classdesignation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m longcomplete as per standard design |
| 59 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 60 | Providing and fixing of heating point. |
| 61 | Providing and fixing Service Line(Aluminium 25 sq m) |
| 62 | Iron D Box of standrad make , |
| 63 | MCB 6-32 Amp. |
| 64 | MCB 6-40 Amp. |
| 65 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood |
| 66 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 50 mm thick with zinc coating not less than 275 gram/m2 |
| 67 | Carriage of material Sand av.30 KM HL 400M |
| 68 | Carriage of material Bajri av. 30KM HL 400M |
| 69 | Carriage of material Brick av 60km HL400M |
| 70 | (R. WALL ) Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 71 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 72 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 73 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 74 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete.Welded |
| 75 | Fencing with R.C.C. post placed at required distance, embedded in cementconcrete blocks, every 15th post, last but one end post and corner postshall be strutted on both sides and end post one side only, provided withhorizontal lines and two diagonals of barbed wire weighing 9.38 kg per100 meters (minimum), between the two posts fitted and fixed with G.I.staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixedwhile casting the post (cost of R.C.C. posts, struts, earth work andconcrete to be paid for separately) :- Payment to be made per meter cost oftotal length of barbed wire used.With G.I. barbed wire |
| 76 | Sand av. 30Km and HL400 mtr |
| 77 | Bajri av. 30 Km and HL 400 mtr Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender