Tender For Stage Work For The Repair And Renovation Of Residential / Non-Residential Govt. Buildings In The Jurisdiction Of Pwd (R&B) Division Kishtwar (Under Ard Plan 2026-27-M.H. 2216)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
11 days left
EMD
10000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stage Work For The Repair And Renovation Of Residential / Non-Residential Govt. Buildings In The Jurisdiction Of Pwd (R&B) Division Kishtwar (Under Ard Plan 2026-27-M.H. 2216)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 (1 cement 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 2 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to lS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqın including pointing in white cement mixed with pigment of matching shade complete. |
| 3 | Providing and Fixing of Premium quality Floor Carpet including 6mm thick Foam as approved by Engineer Incharge |
| 4 | White washing with lime to give an even shade Old work (two or more coats) |
| 5 | Providing and applying white cement based putty of specified thickness, of approved brand manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 7 | Polishing on wood work with readymade wax polish of approved brand and manufacture on old work |
| 8 | Removing white ar colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. |
| 9 | Cement concrete flooring 1:2:4 (Icement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate |
| 10 | Centering and shuttering including strutting. propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms |
| 11 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering. finishing and reinforcement 1:1%:3 (1) cement: 1% coarse sand: 3 graded stone aggregate 120 mm nominal size) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 13 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting. fixing in position and applying a priming coat of approved steel primer all complete |
| 14 | Steel work welded in built up sections/fromed work. including cutting, hosting, fixing in position and applying a priming coat of approved steel primes using structural steel ete as required In red. In gratings frames, guard bar, ladder, railings, brackets, gates and similar works |
| 15 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer incharge: 1:3:6 or richer mis (1/c equivalent design mix) |
| 16 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement: 4 coarse sand 8 graded stone aggregate 40 mm nominal size) |
| 17 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: 7.1.1 Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 18 | Dry random rubble masonry with hard stone in foundation and plinth Without bond stone Nallah |
| 19 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 (1) cement 6 coarse sand) |
| 20 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 21 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in: Cement mortar 1:41 cement 4 coarse sand) |
| 22 | Extra for half Brick masonry in superstructure above plinth level unto floor V level. |
| 23 | 15mm cement lane plaster on rough side of single or half brick wall of mix 1: 1: 4 (1 cement: 4 fine sand) |
| 24 | 12mm Cement plaster finished with a floating cout of neat cement of mix: 1:4 (1 cement 4 fine sand) |
| 25 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 26 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 9.28.4 First class kail wood |
| 27 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 9.8.4 First Class kail wood |
| 28 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 9.10.4 First class kail wood |
| 29 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 9.6.4 First class kail wood |
| 30 | Renewing glass panes, with wooden fillets wherever necessary : 1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 31 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.6 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 32 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead |
| 33 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm |
| 34 | Mason (plaster of paris work)1st class |
| 35 | Carpenter 1st Class |
| 36 | Fitter (grade 1) |
| 37 | Technician |
| 38 | Helper Technician |
| 39 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 40 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 41 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 42 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 43 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 44 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge. |
| 45 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 46 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid. |
| 47 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid |
| 48 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.3.1 W.C. pan with ISI marked white solid plastic seat and lid. |
| 49 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.4.1 One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
| 50 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 51 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : 9.4.6 Budloo / Fir wood |
| 52 | Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : |
| 53 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 54 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 9.46.2 20 mm dia. |
| 55 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 9.98.1 300x16 mm |
| 56 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 9.98.1 250x16 mm |
| 57 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm |
| 58 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm |
| 59 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm |
| 60 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm |
| 61 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 9.103.1 Single rubber stopper |
| 62 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 63 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 64 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 65 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 12.5.1 1.60 mm thick with zinc coating not less than 350 gram/m2 |
| 66 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 67 | Providing and fixing toilet paper holder 1 C.P. brass |
| 68 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe |
| 69 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 75 mm dia. pipe |
| 70 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm dia. |
| 71 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 75 mm dia. |
| 72 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, blots and nuts complete 100 mm dia PVC |
| 73 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 75 mm dia. PVC |
| 74 | Providing and fixing plain bend of required degree 100 mm dia PVC |
| 75 | Providing and fixing plain bend of required degree 75 mm dia. PVC |
| 76 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100x100mm pvc |
| 77 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75x75x75x75mm pvc |
| 78 | Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x75x75 mm. PVC |
| 79 | Providing and fixing single unequal plain junction of required degree 100x100x75 mm Sand cast iron PVC |
| 80 | Providing and fixing PVC off sets With 75 mm dia. Pipe |
| 81 | Providing and fixing PVC 76 mm off sets With 100 mm dia. Pipe |
| 82 | Providing and fixing terminal guard 100 mm. PVC |
| 83 | Providing and fixing terminal guard 75 mm. PVC |
| 84 | Providing and fixing collar 100 mm. Sand cast iron PVC |
| 85 | Providing and fixing collar 75 mm Sand cast iron PVC |
| 86 | Providing lead caulked joints to PVC fittings of diameter 100 mm.. |
| 87 | Providing lead caulked joints to PVC fittings of diameter 75 mm |
| 88 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm Joutlet PVC |
| 89 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete. including cost of cutting and making good the walls and floors 100 mm inlet and 75 mm outler PVC |
| 90 | Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement 3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement :4 coarse sand) 100 mm dia |
| 91 | Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement 3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement :4 coarse sand) 75 mm dia |
| 92 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 100 mm |
| 93 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 75 mm |
| 94 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 95 | Providing and fixing Sunmica Imm thick with Fevicole (Complete Job) |
| 96 | Providing and fixing specified board medium density exterior grade (Grade 1) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) Flat pressed 3 layer particle board or graded wood particle board IS:3087 12mm |
| 97 | Providing and fixing specified board medium density exterior grade (Grade 1) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) Flat pressed 3 layer particle board or graded wood particle board IS:3087 18mm |
| 98 | Providing and fixing plain, square edged wooden beading 65x12 mm section with screws of approved quality for ceiling 1st class kail wood |
| 99 | Repair of old chairs by way of P/F of cloth cover and other back foam side quotion including polish necessary materiais including labour (All Complete Jobl |
| 100 | Providing and supplying of Tarpin oil cleaning of wood panelling / flooring wood work |
| 101 | Providing and fixing Curtain Bracket and Finials |
| 102 | Providing of dusting cloth |
| 103 | Providing and fixing of 12mm thick wooden planks panelling Ready made (All Complete job) including frame work |
| 104 | Providing and fixing of laminated wooden flooring Readymade (All complete job) including 2mm thick foam and polythene sheet (10mm thick) |
| 105 | Providing and supplying of supperrior curtains 9'-0\\" in length |
| 106 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive |
| 107 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap. complete inall respect as per directions of Engineer-in-Charge |
| 108 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. |
| 109 | 12 Module |
| 110 | 6 Module |
| 111 | 4 Module |
| 112 | 3 Module |
| 113 | 5/6 Amp Switch |
| 114 | 5/6 Amp. Socket |
| 115 | 16 Amp. Socket |
| 116 | 16 Amp. Switch |
| 117 | 16 Amp. Socket (Simple Anchor) |
| 118 | 16 Amp. Switch (Simple Anchor) |
| 119 | Light Conceald 5\\" |
| 120 | Fan Router |
| 121 | Exhaust Fan |
| 122 | LED 12 Volt Blub |
| 123 | Ceiling Fan |
| 124 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 125 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over compacted bed of sand, compacting and proper 50mm thick embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern |
| 126 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in-All kinds of soil. |
| 127 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 128 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 129 | Dumping stone including cost of stones. in Horizontal on level |
| 130 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres |
| 131 | All kinds of soil |
| 132 | Ordinary Rock |
| 133 | Hard Rock (Requiring Blasting) |
| 134 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge All kinds of soil |
| 135 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site. for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base /base course on well prepared surface and ompacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge |
| 136 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded |
| 137 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) using 20% plum Nallah |
| 138 | Silt clearance from canals. Inclusive of initial lead and lift (50m & 1.5m respectively) wet |
| 139 | Dry stone pitching, 225mm thick, including cost of stones and preparation of surface. Nallah stone |
| 140 | Hand-packing stones in wire-crates; including cost of stones but excluding cost of crates |
| 141 | Supply of wire Crate at site of Mesh Size 50 mm x 50 mm and dia of wire mesh 4mm |
| 142 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-1 (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 143 | Providing / laying PVC pipe including excavating, Refilling and fitting complete job 4 inch dia |
| 144 | Providing / laying PVC pipe including excavating, Refilling and fitting complete job 8 inch dia |
| 145 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete direction of as per Engineer-incharge |
| 146 | Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 16mm OD(SDR-7.4) |
| 147 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe, 16mm OD(SDR 7.4) |
| 148 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe 20mm OD(SDR-7.4) |
| 149 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and 25mm making good the wall etc PN-16 pipe OD(SDR-7.4) |
| 150 | Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported carth, sludge or manure) |
| 151 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for pavment) |
| 152 | Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) |
| 153 | Screened through sieve of I.S. designation 20 mm |
| 154 | Screened through sieve of 1.S. designation 16 mm |
| 155 | Screened through sieve of I.S. designation 4.75 mm |
| 156 | Rough dressing of the trenched ground including breaking clods. |
| 157 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation |
| 158 | Fine dressing of the ground |
| 159 | Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately) |
| 160 | Mixing earth and sludge or manure in proportion specified or directed by officer in charge. |
| 161 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days on more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction |
| 162 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 19.6.1 15 mm dia. nominal bore |
| 163 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 19.6.1 20mm dia. nominal bore |
| 164 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 19.6.1 15 mm dia. nominal bore |
| 165 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 18.28.1 Semi rigid pipe 18.28.1.1 32 mm dia |
| 166 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 18.28.1 Semi rigid pipe 18.28.1.1 40 mm dia |
| 167 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. 19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing 19.2.1.1 PN-16 pipe, 16mm OD(SDR-7.4) |
| 168 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. 19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing 19.2.1.1 PN-16 pipe, 20mm OD(SDR-7.4) |
| 169 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. 19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing 19.2.1.1 PN-16 pipe, 25mm OD(SDR-7.4) |
| 170 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 19.2.2.1 PN-16 pipe, 16mm OD(SDR-7.4) |
| 171 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 20mm OD(SDR-7.4) |
| 172 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 173 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm diafully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 31.20.1 With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. |
| 174 | Providing & fixing 35 litre capacity electric storage geyser of approved brand, 2000W, with MS/SS glass-lined tank, PUF insulation, thermostat, safety valve, complete with all fittings, connections, testing and commissioning. |
| 175 | Providing, supplying, installation, testing and commissioning of 1.5 HP centrifugal pump set (single phase) of approved make, conforming to relevant IS specifications, complete in all respects |
| 176 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead 1 With cement mortar 1:4 (1 cement : 4 fine sand) |
| 177 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : 14.6.1 Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 178 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : 14.6.2 Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm) |
| 179 | Renewing glass panes, with wooden fillets wherever necessary : 14.7.2 Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm) |
| 180 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 181 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 22.1.1 For fixed portion 22.1.1.1 Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 182 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 22.1.1 For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 183 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) 22.1.2.1 Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 184 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 185 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. 22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 186 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides. |
| 187 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 188 | Providing / fixing decorative PVC wall panelling comprising rigid PVC of approved shade design and texture minimum 8-10 mm thickness fixed over a frame of treated timbers batters or 4.1 channels at required spacing panel shall be securly fixed with required screening / ..................... to adhieves as recommanded by the manufacturer. Including, cutting, fixing complete job. |
| 189 | Providing and fixing plain panelling with skirting chair rails, and cornice with necessaryscrews, priming coat on unexposed surface etc., complete. 12 mm thick |
| 190 | Engagemant of Labour for |
| 191 | Blacksmith 1st class |
| 192 | Blacksmith 2nd class |
| 193 | Carriage of Materials |
| 194 | Sand / Stone aggregate for an Avg. distance of 30 Kms by MT |
| 195 | Stone for an Avg. distance of 07 Kms by MT |
| 196 | Brick for an Avg. distance of 210 Kms by MT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender